atex fan

... motors, spark protection, and other ATEX specific requirements, we can deliver a fan fully tailored to your needs. Whether the fan is to be installed in an industrial facility with ATEX requirements or on an offshore platform in the North Sea, we have the experience and expertise to assist you. Motors and configurations can be completely customized according to the application's needs, and we work with a variety of high-quality motor suppliers.

...ATEX FAN...

...Flameproof unit air heater ATEX EEx d IIC T3 ATEX The „FUH“ range of flameproof electrical unit air heaters offer a hazardous area, space heating solution, for large premises requiring high heating capacity. They are certified for zone 1 or 2 areas, where the flammable atmosphere is a group IIA, IIB or IIC gas. This heater has an internal fan.

... and overheat protection - Portable on wheels, by forklift, or crane - Possible connection for blowing ducts - Available in ATEX version Technical specifications - Power: 40 kW (34,394 kcal) - Max air flow: 3,000 m³/h (600 Pa) - 8 power levels (fan and temperature) - Temperature increase ∆T: 60 °C - Supply voltage: 400 V / 50 Hz - Max current draw: 61 A (41.5 kW) - Fuse / Socket: 63 A / CEE 63 A, 5-pin Type: mobile Power supply: electric Other features: not specified...

... (paint, varnish, adhesives, resins, etc.). It is possible to adapt up to 3 levels of filters inside the unit depending on the desired application. The depth extension of 1m allows for optimal air flow channeling for effective extraction. The suction power meets the requirements of Carsat, whether you are a craftsman or an industrial operator (suction speed 0.5m/s). ATEX fan available as an option in case of flammable product application. Possibility to install an activated carbon filter to reduce odor and VOC emissions. Standard Height/Width: L1.80m x H1.80m...

...We offer energy-efficient, environmentally friendly, and reliable fans that are also competitively priced. Each fan can be provided in a special version, resistant to acids and other aggressive environments, as well as high and low temperatures. In our product portfolio, we have industrial fans that are gas-tight, explosion-proof, insulated in ATEX explosion-proof design, and resistant to sudden pressure surges and abrasion.

... operations at universities, research institutes, and in the chemical industry. Due to the variety of possible materials for the housing and impellers, they can be optimally configured for specific needs. The flow rate ranges from 3,000 to 250,000 m³/h with a total pressure difference of over 5000 Pa. These fans are suitable for explosion-prone areas (extraction from ATEX Zone 2). For more information, please visit our website or contact us directly.

...Complete installation for a concrete formwork manufacturer. In this workshop, we have 2 distinct networks: 1. An 11 kW fan for a varied range of conventional machines. 2. A fan network with open blades, type TQ 15 kW, to serve the 4-sided planer and the machining center. ATEX filter with a sluice operating under pressure; in a second phase, a recovery system under sluice will be implemented towards the bin in a closed circuit with quick connectors and a filling detector.

...High volume flow due to optimized flow design Low variety of variants through multi-voltage concept 230V 1~ to 575V 3~ Various connection options, e.g. terminal box, plug, cable Custom housing adaptation Compact dimensions by utilizing the internal intake space EMC compliant Very good vibration resistance due to stable sheet metal die-cast housing Galvanized sheet metal, seawater-resistant die-cast alloy ATEX versions Versions for ambient temperatures down to -40° C Variants suitable for the food industry cURus certified Consistent protection class IP66 for all variants...

...centrifugal ATEX fan used in case of potentially explosive powders The centrifugal ATEX fan generates the necessary depression to enable the extracted air to move through the tubing, filters and machines. It is used in various industrial sectors, both in the ventilation and extractor field, in pneumatic transport, mechanical fume draught and air conditioning. Benefits Its versatility enables its use in a wide range of conditions. Its construction in paint steel sheeting guarantees its durability over time.

...Atex - certified explosion-proof duct fan for generating overpressure in stairwells, elevator systems, and for the removal of used indoor air. Asynchronous EX motor located outside the airflow and aluminum cover to prevent spark formation. Areas of application: Stairwells, elevator systems, industrial halls, hazardous material storage, etc. Construction: The housing is made from particularly...

...base) are also made of thick steel sheet. The extractor meets ATEX requirements with the following components: Execution 5, ATEX IIB–Zone 22–category 3G or 3D–T3 SIEMENS motor–B3–400/690V /50 Hz–EEXd–IIB–Zone 22–category 3G or 3D–T4 Welded volute Inspection door Protection grille for suction and blowing Brass bell Brass disc on the motor mounting side Silicone seal between the volute and the bell.

... industrial touch monitors and panel PC systems. Various installation options, such as open frame or panel mount, sunlight-readable high-brightness displays with multi-touch functionality, IP65 or IP66 protected panel PCs, marine-grade displays, and much more. Features: - Available screen sizes: 5.7" to 55" - Protection classes: Full IP65, Front IP65, Full IP66, Front IP66, Full IP69K, Marine, ATEX Zone 2 - Housing cooling: With fan or completely fanless systems - Touch interface: PCAP (Projected Capacitive) Multi-Touch, Resistive, or SAW...

...{"Collection container":"Bucket with 48 liters","Pneumatic filter cleaning":"","Dimensions (L x W x H)":"1.3 x 0.7 x 2.3 m","Fan power":"2.2 kW","Suction capacity":"1,200 m³/h","Filter area":"17 m²"}...

...Handling of ATEX explosive gas mixtures Mobile, TÜV approved system consisting of an ATEX zone 0 fan with smokeless flare for treatment of explosive vapors. Application: tank cleaning/ tank loading Mobile ATEX zone 0 vapor displacement system and mobile smokeless flare system for the treatment of vapors coming from tank cleaning. System characteristics : • Anti-flasback burners • Static flame/detonation arrestors • Hydraulic flame arrestors • LEL detection • O2 analysers • ATEX Zone 0 extraction fan...

...Centrifugal fan Adiabatic method fan Waste transport fan Transmission fan Fan with frequency variation Helical fans ATEX fan Towers Soundproof casing Acoustic cabin Corrosion-resistant fan for acid vapors...

...Radial fans, centrifugal fans, hot gas version, spark protection according to ATEX, insulated fan housings, wear protection on the fan impeller...

...÷315 kW"},"Suitable for inverter operation":true,"SERIES TA":{"Sizes":"56÷132","Description":"Aluminum housing","Power":"0.06÷11 kW"},"Protection Type - Cooling Type":{"IP 55 - IC 416":"With external fan","IP 55 - IC 411":"Surface cooling"},"SERIES CS":{"Sizes":"355 L÷500","Description":"Steel housing","Power":"250÷1200 kW"},"ATEX ZONE 22":"Motors are also available in this version","Efficiency Class":"IE2/IE3/IE4"}...

...Technical features: forced ventilation and cooling system for warehouse Autonomous ventilation and air supply units complete with: - external air louver section - supply air fan section for ventilation - section prepared for post-heating expansion - filtering section - special version with ATEX components for explosion-risk areas - power and electronic control panel - digital central unit for...

... and single-phase versions up to IEC315 >2, 4, 6, 8-pole and pole-switchable motors available >Power ratings up to 315 kW >Brake motors with WS and GS brakes up to IEC200 >CSA/UL and ATEX versions available Options: Special voltage; special design; external fan; encoder; double brake; increased protection class; motors available in special designs.

... panel Filtering system: 12 polyester satin bags Filtering surface: 11 m2 Cleaning system: 1 ATEX certified electric shaker Discharge system: 1 discharge hopper dia 600 Suction capacity: 1600 m3/h Machine dimensions when assembled: 800 x 1000 x 3100 mm without fan...

...What is a jet fan? Operating on the same principle as an ejector, they are used to draw in large volumes of air, gas, and vapors at low pressure. These devices are often used to extract all gases from a factory, including VOCs, to be burned in a boiler. They are particularly interesting because they can be made from a variety of materials, have no moving parts, and can operate in highly restrictive ATEX zones.

... industrial dust collectors can operate either under pressure or vacuum, depending on the position of the fan in the system. The bag filter is capable of handling various types of dust depending on the filter media it is equipped with. Whether it’s metal dust, wood dust, or composite dust, the industrial bag dust collector adapts.

... Technical specifications: - Power: 120 kW (103,181 kcal) - Max air flow: 9,000 m³/h (600 Pa) - 8 power levels (fan and temperature) - Temperature increase ∆T: 60 °C - Supply voltage: 400 V / 50 Hz - Max current: 182 A (125.5 kW) - Fuse / Socket: 200 A / direct connection - Dimensions (L x W x H): 2,000 x 1,300 x 1,450 mm - Weight: 540 kg on wheels - Noise level (at 3 m): 78 dB(A)...

...Industrial fans as inline blowers for industrial drying, ATEX or recirculation units Fan unit with free-running wheel Designed for pressures from 500 to 3,800 Pa Impeller diameter from 355 to 1,250 mm Variants: - as inline fan - as pull-out - as swing-out - for device installation - special solutions for high-temperature areas in ATEX design...

...Belt-driven 3-blade compact unit. Fan stage and unit made with special materials and numerous modification options. ATEX certified. Extensive accessories such as bypass regulators and shut-off devices. Volume flow: 30 to 2,700 m³/h Overpressure: 1,000 mbar (g) Transport medium: Landfill gas, biogas, natural gas, town gas...

...an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Enclosure material (cabinet, door):Coated aluminum alloy Protection category:IP67 | 1Ex d | ATEX compliant Enclosure mounts:Wall or pole mount with NSBon-01 kit Operating Temp:-40°C to +60°C Dimensions (no cable glands...

...Conveying fans are specifically designed for the pneumatic transport of solids. Whether dust, shavings, or granules, the fans from MEIERLING ensure a continuous and trouble-free transport flow even in extreme operating conditions. The special advantages of MEIERLING conveying fans include: achieving high pressure differentials, use with aggressive media, and designs compliant with ATEX. Application fields primarily include: process gas technology, solid material transport. Industries and application areas include: aluminum industry, steel industry, chemical industry, plastics industry.

...Construction size: DN 315 – DN 2500 Application: Supply and exhaust ventilation up to 55°C or 120°C continuous temperature Volume flow: max. 45,000 m³/h Pressure: max. 4,000 Pa Motor: Frequency: 50/60Hz, max. 90 kW Surface: Steel, coated/galvanized/stainless steel (V2A 1.4301 / V4A 1.4571) Impeller: Aluminum/adjustable blade angles at standstill ATEX category: Category 2 and 3, Gas/Dust Drive: Direct/Belt Accessories: Extensive accessories...

... all components necessary for correct operation of lv system. Timer for extraction of fumes before operator enters inside pressurized system atex lighting area for complete installation of air extraction unit pressurization unit complete with synthetic pre-filter, electric fan, support structure and manual shutter for regulating incoming air thermo-radiating unit integrated in pressurization unit and complete digital heat adjustment system All tecno azzurra systems can be designed and manufactured according to your specifications.