tin bronze

...Tin bronze provides good wear resistance, high load-carrying capacity and corrosion resistance. Tin Ensure also high durability and tensile strength...

...The essential characteristics of this PVD coating are a coefficient of friction of 0,4 and a max. coating hardness of 2.600 HV. The low thermal conductivity effects a very good thermal insulation that increases the possible cutting speed. TiN coating is a all-round coating that has a big rang of applications. However it shouldn’t be used for cutting brass, bronze, copper or austenitic stainless steel.

...Sliding elements made of solid tin bronze (CuSn8) with lubrication reservoirs that serve as lubricant storage. The lubrication reservoirs allow for larger quantities of lubricant to be stored, resulting in longer maintenance intervals. These sliding bearings are only suitable for grease lubrication. Type of lubrication: Grease lubrication Temperature range: -40 to +150 °C Max. sliding speed: 2.5...

...Massive sliding bearings made of tin bronze with diamond-shaped lubrication pockets, suitable for oil or grease lubrication, low maintenance, ready for installation Bunded bush and cylinder bush AMBz®09 made of tin bronze CuSn8/CuSn8P | DIN ISO 3547 ADVANTAGES: ♦ cost-effective alternative to turned sliding bearings ♦ low maintenance ♦ ready for installation ♦ RoHS compliant ♦ REACH compliant...

...YGK EcoPlast Accelerator 2-K L - YGK Plating on Plastics Characteristics:Highly effective, selective removal of the tin protection colloid to avoid overgrowth...

... shaft includes: Electro-polishing, Electroless nickel plating, Silver plating, Golden plating, Zinc plating, TIN plating, Chrome plating, Bead Blasting, Phosphating, Turning, Heat treatment, Carburization, Case hardening, Sand blasting, Passivate, etc. 4. Testing facility: Coordinate measuring machine, projector, roughness tester, hardness tester, and concentricity tester. Height tester, 5. Part size: Diameter from 0.5mm to 150mm 6. Tolerance: +/-0.01mm, Or as your requirement 7. Lead time: 5-25 days after the confirmation of the sample.

... technical details, please visit the product page on our website! Support material/Carrier material:Steel tin-plated Intermediate layer:Sintered bronze Sliding layer:PTFE Static load:≤ 250 N/mm² Dynamic load:≤ 140 N/mm² Sliding speed:≤ 2,5 m/s Friction value:0,02 up to 0,18 µ Temperature strain:– 200 up to + 280 °C Max. PV-value:1,8 N/mm² x m/s Housing Ø:H7 Bushing inner ø after mounting:H9 Shaft tolerance:f7...

...Cleans, nourishes, and shines tiles and marbles Shines tin, copper, and bronze Facilitates pipe assembly and gas leak detection. Natural soft soap for maintaining floors (tiles, marbles, linoleum, etc.), cleaning laundry (shirt collars or work overalls, etc.), and metals (copper, zinc, bronze). Professional formula. Color: brown-orange Lemongrass scent.

...Alloy: CuSn4 (CW450K) / CuSn6 (CW452K) / CuSn8 (CW453K) Standard: EN 1652 / EN 1654 Condition: HV / Rm according to customer requirements Delivery form: Foil, sheets, strips, wire, cut pieces Surfaces: Mill finish, electroplated (full surface or selective, nickel-plated, tin-plated, etc.)...

... competitive price for you. Mould steel:DC53,SKD11,SKH9,Cr12,45#Steel, WC Mould style:Single-station dies, Multi-station dies, Progresssive dies,Deep Drawing Dies Mould Accuracy:0.005mm-0.01mm Finshing Operations:Forming, Bending,Deburring, Tapping,Riveting,Welding Surface treatment: Anodizing,chrome / zinc / nickel /Tin plating,blackening,painting,powder coating,hot-dip galvanizin Leadt Time:15-30days for samples,30-60 for mass production Available Certificates:COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports...

... round bars, flat bars, pipes Cast Tin Bronze and Red Brass: CuSN7ZnPb, CuSN12Ni in round bars, hexagonal bars, square bars, flat bars, pipes Cast Aluminum Bronze according to DIN 1714: CuAl10Ni3Fe2, CuAl10Fe5Ni5, CuAl11Fe6Ni6 in round bars, square bars, hexagonal bars, flat bars, pipes, sheets Low-Alloy Copper Wrought Alloys: CuBe2, CuCo2Be, CuCo1Ni1Be, CuCrZr, CuNi2Si, CuTeP in round bars, square bars, hexagonal bars, flat bars, sheets Gray Cast Iron and Ductile Iron: GGC 25 and GGGC 40/50 in round bars, square bars...

...Phosphor Bronze, Beryllium Copper & Titanium. Handles are available in Beech, Marine Plywood, Polymers, Aluminium & Copper. Handle sizes are dependent on the application and we are able to supply bespoke handles if required.

... specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

...The company produces battery cymbals using traditional methods, 100% handmade, in B20 alloys. B20 is made from bronze with 20% tin. Copper used is 99.99% pure. After being shaped by hand and turned, tests are conducted before shipping to the customer.

...Zinc-containing bronze alloys, such as red brass, are made from the metals copper and zinc, and may also contain tin, lead, and nickel. The color spectrum ranges from gold-red (high copper content) to a light yellow (high zinc content). The common alloys have a maximum zinc content of 45 percent and are considered particularly resistant to cavitation and wear. Their excellent emergency running and sliding properties also make red brass frequently used in hydraulic systems – for example, in sliding bearings, shells, bushings, or gears.

...Chemical Composition CuSn8P - Bronze Copper (Cu): 91.3 % Tin (Sn): 8.5 % Phosphorus (P): 0.2 % RoHS compliant minimal space requirement good wear resistance suitable for harsh operating conditions more cost-effective than turned sliding bearings weight savings compared to turned sliding bearings good resistance to corrosive media regular lubrication with grease or oil required low sensitivity to shock loads and vibrations...

...Possibility of supplying material with tin-plated, nickel-plated, or other surface finishes upon request.

... bronze, copper-tin-lead, copper, and aluminum. Production is focused on the creation of small/medium series and unique pieces. The standards provide for an average production of small-sized pieces of 2 kg, up to castings of 2,000 kg. We are capable of developing the entire technological process, from design to the production of the semi-finished product and the finished product. The production process includes both the "green" solution and the silicate sand method, using both manual and automatic molding techniques.

...Metal stamping pin, contact, terminal are widely used on electronics like socket, switch, plug, battery, PCB, car antenna, car charger, material usually is copper, beryllium; copper, phosphor bronze with super electrical conductivity, and they can be silver, gold, tin, nickel plated with 4-10 micron thickness. Item No:HT-061 Size:15X3X5MM Tolerance:0.01mm...

...Main products: High-precision tin phosphor bronze strips, copper strips, brass strips and white zinc copper strips Product characteristics: Good yield strength and fatigue strength, good elastic properties, excellent processing and bending properties, good ductility, durability and corrosion resistance Applications: Electrical and electronic devices, communication technology, electrical network, hardware, construction industry, home appliances Production capacity: 104,000 tons Honorary titles: Zhejiang Famous Brand Product, China's Top 5 Copper Strip Company ...

...Sinterfiltri, in addition to its extensive catalog of sintered bronze capped bushing filters, is capable of producing custom special filters based on specific customer requests, for various applications and industrial uses, and more. PRODUCT FEATURES: Composition: 89% copper, 11% tin Density: from 4.5 to 5.5 g/cm³ Porosity: from 30% to 40% Tensile strength: from 3 to 5 Kg/mm...

...We produce runners in pure copper, aluminium bronze, tin and lead bronze as well as brass. Pieces are delivered as-cast, rough or fully machined. ...

...Sand casting of copper alloys: tin bronzes, lead bronzes, brasses, nickel aluminium bronze, copper and special copper alloys. Maximum weight: 2 tons Staff: 70 employees. Turnover: approx. 10 M€ BP 64 - Rue de l’Embarcadère F - 03600 COMMENTRY Tél. : +33 (0) 4 70 64 58 80 Fax : +33 (0) 4 70 64 64 87 Site web : www.sri-foundry.com E-mail : commercial@sri-foundry.com Sizes:up to 2x2 m Weight:from 1 Kg to 2 to. Alloys:Standards or on request...

... Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle...

... the surface. These surfaces complement the existing production and storage program of the Designfactory. The areas of application are very versatile: elevator construction, facade and metal construction, shop fitting, decorative interior design, lighting industry, etc. Colors: • gold • brass • champagne • bronze • copper • mocha • blue • anthracite • black • (additional colors available upon customer request) Base / Variants: • mirror/high-gloss polished • glass bead/ceramic/diamond blasted • perforated sheets (including inner holes) • ground (K 80-1200) (grinding pattern longitudinal and...

...12 tin casting...

...Material: Bronze-Copper alloy; Solder material: Tin; Our services: Soft soldering...

...We coat wooden profile strips, extruded aluminum profiles, and plastic profiles with copper, bronze, tin bronze, steel, corten steel, brass, silver, gold, and stainless steel.