high-current contacts

...High Current Contact System for the Anodizing, Electroplating, and PCB Technology Industries Execution Type Performance Range High Current Contact Systems from 250-12,000 A Quick-Release Contact Heads 1,000 + 2,000 A Plastic Support Blocks 250-12,000 A Your Advantages: - Long lifespan due to cast design - No control elements - Contact pressure is proportional to the load weight - No heat generation -> very low power loss - Suitable for fully automated systems A DEVELOPMENT FROM PRACTICE FOR PRACTICE, TRIED AND TESTED FOR DECADES!!

...as pin or socket contacts - compatible with various housings - straight or angled - available in 10, 20, or 40 A Item number: HAS.. / HAB..

...D-SUB Combination connectors offer the possibility to equip a proven design with new functionality. This is achieved by using different types of contacts without changing the shape, size, and installation dimensions of the connector itself. By utilizing high-current contacts, the power supply of the device can be realized without an additional interface for energy input. High-voltage contacts...

...Through an improved 4P design, nominal currents of up to 13A are now possible. To meet the increasing demand for fast charging times in power-intensive applications while also addressing the high requirements for miniaturization, the proven 4P design has been continuously developed and enhanced. As a result, nominal currents of up to 13A can now be achieved. These miniature high-current...

... - External emergency stop (EPO) - Graphical LCD screen with full control - Automatic battery testing - High current charging capacity in the battery - Temperature compensation for optimal charging - 512 recorded events (+ over 46,000 alarms) - 2 RS232 serial ports & potential-free contacts - Cutting-edge remote control functionality via Teamviewer - Static and manual maintenance bypass - Compact design - Up to 8 units in parallel - Backfeed protection - 2 years warranty...

...Switch contacts for interrupting high voltage. Hybrid design: A tungsten-copper tip is permanently bonded to a copper body. High wear resistance & high conductivity. Tungsten or tungsten-copper contacts are used as high current, high voltage, or interrupting contacts (e.g., tulip contacts). Depending on the composition or proportions of tungsten and copper, conductivity, wear resistance, and hardness can be varied. Soldered copper/tungsten-copper composite contacts are also available. WCu electrodes are also used as welding electrodes and for electrical discharge machining (EDM).

...The contact grease ELKALUB GLS 590 UV has been developed to reduce wear on the surfaces of contact pads and plug connections. This high-temperature grease, based on PFPE, withstands the temperatures generated by high current loads at the friction surfaces of the contacts. The vibrations produced, for example, by power tools are dampened by ELKALUB GLS 590 UV, protecting the contact surfaces from...

...Chemical Nickel, also known as chemical nickel plating or nickel-plating, is a process in which nickel is applied to metallic surfaces without the use of electric current. The nickel-phosphorus coating provides excellent corrosion protection, high wear resistance, and outstanding abrasion resistance. It allows for a smooth, contour-accurate surface that is applied particularly evenly to complex...

...The bidirectional DC contactors C303 are compact high-performance switching devices for applications with high inrush currents or large capacities. All versions can continuously carry up to 350 amperes; in the event of a short circuit, significantly higher currents can flow without the contacts welding together. This allows the contactor to maintain its full functionality to disconnect large...

...The new UNI Dicht TRI achieves the highest shielding attenuation values across the entire frequency range and impresses with a very high current-carrying capacity for reliably dissipating undesirably high shield currents. Installation is simple and secure: only the cable sheath needs to be removed at the contact point where the shield braid is to be connected. Even when inserting the cable into...

... has a 4-digit LED-display for representing the differential pressure as well as up to 2 freely configurable contacts. Features: — differential pressure 0 ... 6 mbar up to 0 ... 1000 mbar — accuracy: 0.35% / 1% / 2% FSO — piezoresistive silicon sensor — compact and robust aluminium housing — suited for non-aggressive gases and compressed air — current and voltage output signals in 2- and 3-wire systems Optional Features: — display and switching module with up to 2 contacts — customer specific versions...

... continuous current of 63 A, the T5B-4-8902/I4 provides the necessary power to switch various electrical loads. Its robust construction in a panel-mounted design and the protection class IP65 ensure reliable operation even under adverse conditions. The cam switch is equipped with 8 contacts that enable precise switching. The switching angle of 60 ° and the detent switching behavior with a 0 position ensure clear and precise switching operations. Product Number:T5B-4-8902/I4 Manufacturer:Eaton EAN:4015082072377 Stock:38 Shock Resistance:15 g...

... ports and dry contacts designed for system control, possible remote control through MPU controller. Case design in format of 19" telecommunication rack with height of 1U guarantees compact placement of equipment.

... range: - 40 ... + 75°C • High continiuous thermal current Ith = 10 A Function:Safety relays, according DIN EN 50578 Type of relay:monostabil Contact material:AgSnO2; AgNi Continuous current:10 A Nominal voltage UN DC:6 - 110 V Voltage Range UN:0,75 - 1,4 V Test voltage (AC) contact set - coil:≥ 4 kV eff Clearance and creepage distances, contact set - coil ≥:8 mm Temperature range (- / +):40 - 75 °C Protection type:optional RT III (wash-tight); RT II (flux-proof relay) Size L x W x H:77,1 x 20 x 39,5 mm Approvals:TÜV Relay type:OA 5603/39__L1...

...All versions can carry up to 500 amperes continuously. In the event of a short circuit, the series can even handle 5,000 amperes for 20 milliseconds without the contacts welding. Therefore, the contactor retains its full functionality to disconnect high power areas up to 500 amperes at 1,500 volts when needed – regardless of the current direction. This fully bidirectional function is important...

... Direct battery emergency drive in the event of a power failure High starting torque The DC motor consists of a stator and a rotating part, the armature, separated by an air gap. The armature is wound with coils that are connected to a commutator. The polarity of the armature winding is changed during the rotation via the sliding contacts (carbon brushes) that run on the commutator, thereby generating a constant torque...

... used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control. Operational frequency:10,525 GHz Range:5…50 m Detection width:0,75...2 m Detection height:up to 1,4 m Supply Voltage:9…30 V Current consumption:0,035 A Detection probability:0.98 Operational temperature:minus 40...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Dimensions:141x123x71 mm Weight:0,4 kg...

...Whether in industrial robots, testing systems, or in industrial tool changing systems – in all these cases, automatic docking must be ensured. - Easy handling and operability - Robust housing made of aluminum or plastic available in three sizes - Inserts 2+PE to 36+PE for the transmission of signals, power, current, data, and media - High pole density due to the smallest contact diameters - Standard contacts with crimp connection. Solder connection available upon request - ODU DOCK quick-change head meets the requirement for plug cycles of up to 10 million.

... distance from the front film by a spacer film with holes at the switching contacts, ensures that when pressing the control symbol on the control film with a fingertip, the front and back films make contact. An electric current flows, and the switch is activated. High-performance adhesives are used to bond the various films. The spacer films can be applied in different thicknesses, and the control symbols on the control film can be represented in relief through embossing.

... of switching elements is available. The switching contacts operate with a minimum current of 1 mA, making the STA safety switch suitable for operation with safe control systems. Features: - Robust construction - 3 cable entries - High protection class IP 67 - Optional LED...

... outputs which enables calculations and sensor monitoring (e.g. prognostic maintenance of sensors) • 2 freely programmable relays with changeover contacts, e.g. for liwith or alarm signalling • AC/DC wide-range power supply unit • Pluggable high-quality screw or spring cage terminals...

...Glass-enclosed contacts are not affected by the external atmosphere, and solve the contact failure problem of air contact type relays. Since there are few driving parts and the Mechanical life is long, it has a long life even in high-frequency switching applications. When the inductive load is interrupted, glow discharge is performed, so there is little surge voltage, and it is a product that...

... additional deburring and surface finishing method, we also offer brushing and belt grinding for thin foils and large-sized parts. Application examples • Foils, jigs, bands • Contacts & current conductors • Rotor/stator packages • Tubes, capillaries, needles • Springs Available materials • Ceramics, glass, silicon • Ferrous metals • Non-ferrous metals • Heavy metals...

...For connectors and low-current contacts, gold/cobalt coatings are primarily used over nickel or chemical nickel layers. In certain applications, the use of gold/nickel layers can be beneficial. For economic and functional reasons, it may also be advantageous to use palladium or palladium alloys. All of these systems meet high standards for hardness, wear resistance, contact resistance, and corrosion resistance. We are happy to advise you and find your individual solution.

...• Highest quality plug contacts for signal and high current connections • Custom adaptations possible • Compatible / interchangeable with products from other manufacturers • Various base materials, e.g. copper beryllium, rust and acid-resistant stainless steel, hard copper alloys, or according to your specifications • Diverse surfaces: silver-plated, nickel-plated, gold-plated, tin-plated, or according to your specifications • Delivery forms as strip goods, strip sections, rounded contacts • Leaf spring technology • Torsion spring technology...

...The DN 102 power supply in the KERSTEN neXt® product family is the control station for your discharge system. It supplies and controls up to 5 high voltage generators in the KERSTEN neXt® range and also offers you connection and control of a solenoid valve or AK 1x6 compressor controller. Floating contacts are provided for error and enabling signals. The current operational status of each function is signalled via 9 LEDs in the enclosure lid. Cerificate:TÜV / GS / NRTL Production:Germany IP Class:IP 54 Material:Plastic Connections:5...

...featuring deep discharge protection, monitoring of each cell's charge status, and self-cleaning contacts ensuring optimal current transfer. An optional adapter allows the battery to be attached to a belt, making the machine even lighter. An optional adapter also allows the use of two 18V LXT batteries in series as a power source.

... point). Releasing or pressing through (panic function) the button cancels the consent (depending on the wiring, see functional sequence). Buttons + and - These buttons can be individually assigned. For example, for moving axes in the positive or negative direction. Connection type: free cable end Connection cable: 8x0.5mm² + 8x0.14mm² Number of normally open contacts: 2 Number of forced open contacts: 1 Rated insulation voltage Ui: 250 V Rated impulse voltage withstand Uimp: 0.8 kV Protection class: IP65 Conditional rated short-circuit current: 100 A...

...The core functions of the Electrical and Pneumatic Tools division relate to services in purchasing, product management, sales, and service. The PRECITOOL partners, with their high level of specialization, are important contacts for our members and suppliers. Through ongoing dialogue at all levels, we always have access to all relevant information regarding the current product ranges. This exchange of information is ensured through intensive collaboration with professional circles and committees, as well as through a well-functioning supplier network.

... monitors itself and indicates the required exchange itself. This is usually the only maintenance on the device that has to be carried out around twice a year. operating voltage:15 V DC, approx. 20 watts weight:approx. 8 kg limit setting:1 ppm to 18 ppm country of origin:Germany power supply:plug-in power supply 100 ... 240 V / 50 ... 60 Hz wall case:400 x 250 x 160 mm (W x H x D) water hardness raw water :70 ppm to 1070 ppm external signaling:potential-free contacts, 4 to 20 mA current loop, LAN data interface with MODBUS / TCP...