gas flow control

...This training provides an in-depth introduction to the fundamentals of the two closely related areas aerodynamics and fluid dynamics. We teach the basics and advanced knowledge on the following topics: Fluid mechanics; Aerodynamics; Thermodynamics; Gas dynamics; Aerothermodynamics and similarity relationships; (Thermal) turbomachinery; Flow measurement. Together, we will create an individual...

...Regulating dampers from Scheuch COMPONENTS enable safe and reliable control of gas flows. By throttling the flows, they can be adjusted to the specific operating conditions of the industrial plant. Due to the flow-optimized design of the damper profiles, our regulating dampers can also be used at high flow velocities. The control elements cause only minimal turbulence. The control elements from...

...Approved flue gas velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to gas and dust CEMS. Measured parameters:Flue-gas velocity Technology:FlueSonic™ Ultrasonic Measurement/Monitoring capability:0 – 50 m/s Stack/Duct diameter suitability:up to 10 m Flue gas temperature:up to 200 °C Baghouse:Yes Cartridge Filter:Yes Coalescent Filter:Yes Cyclone:Yes Electrostatic Precipitator (ESP):Yes Wet Electrostatic Precipitator (WESP):Yes Wet Scrubber:Yes QA checks:Yes...

...Mechanical connections up to 10 inches / DN 250 The IN-FLOW series of thermal mass flow meters for high flow rates of pure gases is equipped with an industrial-grade housing that provides IP65 protection. The control valves can either be integrated directly into the instrument or installed separately to measure and regulate gas flows. Smallest measurement and control range 0.4...20 m3n/h Largest measurement and control range 220...11000 m3n/h...

...Promix gas dosing stations for physical foaming have been specially designed and developed to meet the needs of foam extrusion. Promix gas metering technology is characterized by high dosing accuracy, reliability and amazingly simple operation. Promix gas dosing stations meet all the requirements of a modern gas metering system for foam extrusion. These include high-precision mass flow control...

... features for easy integration. Automotive: Leak localization, cooling systems, alloy wheel, weld, diecast… Medical: Rubber diaphragm… Domestic Appliances: compressor Digital pressure surve Generated Suction Flow control Vacuum pre test (gross leak) Detection of leaking gas traces – Range: 5~ 100 ppm 32 programs 7 inputs/ 5 outputs Automatic measurement cycle Operating:+ 10°C to + 45°C Storage:0°C to + 60°C...

... according to customer specifications ensures a perfect fit and optimal performance, enhancing the efficiency and safety of the systems in which they are used. Brass pressure reducing bodies include mechanical, automatic, diaphragm, constant flow, and gas models. This variety of options allows for the selection of the most suitable reducing body for each specific application, ensuring precise and...

... protection and preventing waste refrigerant leakage; The provided bell mouth ensures connection to a 1/4 inch HVAC hose or adapter, which can be disassembled for easy replacement if needed. [Purpose] The adjustaole R134a adapter quick connector is used to control the high and low flow rates of vehicle refrigerants. This connector can oe connected to the R134A repair port of the vehicle. [Usage...

...Liquid fuel system for a gas turbine which utilises a variable speed electric motor driving a positive displacement pump. The flow of fuel is controlled by the speed of the pump and not by a valve in traditional systems. The nature of the positive displacement gear pump makes it ideal for aggressive fuels such as low viscosity naptha or high viscosity heavy fuel oil. In every project where this system has been fitted the gas turbine start reliability has been improved. The system offers a rugged, reliable and low maintenance solution to the requirements of a gas turbine liquid fuel system...

...Gas Mixer (Blender) for Medical Gases in Hospitals The Quality Mix air-oxygen mixer from DEHAS Medical Systems is designed to deliver a continuous and precise mixture of medical air and medical oxygen through outlet ports to infants, children, and adults. The exact fractional inspired oxygen concentration (FIO2) corresponds to the selected FIO2 setting on the control knob (rotary switch...

...Our sand control filters with sintered SinterPore laminate filters ranging from 40 to 600 µm filter fineness have been proven for many years. The good adaptation of the medium to the sand environment is crucial for lasting performance. The development of new media with more favorable flow conditions and extended service times is continuously being advanced. Filters with single-layer fabrics offer a cost-effective alternative for certain application conditions. Our filters are made from AISI 304, 304L, 316, 316L, alloy 20, alloy 600, and alloy 625.

... and regulate the flow of fluids. d. Flanges: Connect pipes to other components like valves, pumps, or tanks. Novelty Steel is an experienced fabricator of pressure vessels for power, oil and gas, chemical, food and mining industries. With vast CNC Machinery Park and experienced engineering team, Novelty Steel produces bespoke CNC Machined parts according to the European Norms. Our fabrication portfolio covers: * Pressure Vessels * Boilers * HRSGs * Heat Exchangers * Pipe Spools * Piping Components * Pipe Supports * Process Skids...

... flow state is displayed on the evaluation electronics with LEDs. The devices are used wherever safe, robust, and low-maintenance monitoring of flow values is required. The measuring probes of the product series ST 400 Ex; STS; STEX have an ATEX approval and can be used in gas-ex areas depending on the version, which require equipment for EPL Ga or EPL Ga/Gb. In dust-ex areas, use is permitted up to EPL Da.

... 2. Precision Temperature Control and Monitoring System The Vulkan GPH 200 features an integrated, user-friendly thermostat with sensors that continuously monitor gas temperature, automatically adjusting heating output to maintain the desired level. This precision control minimizes energy consumption by dynamically adapting to gas flow demands. 3. Durable and Corrosion-Resistant Construction...

...The FurnaceMeter™ is available for gas flow measurement. These meters are fitted with integrated motorized flow control valves specifically designed for the gas type, inlet pressures, and scale ranges to provide precision process control for most applications. The FurnaceMeter™ provides a retrofit foot print to most variable area meters to minimize piping changed when upgrading to differential...

...6-way construction With leakage control Media: hydraulic (flow line/return line), cooling liquid (flow line/return line), natural gas, oxygen Speed:200 rpm Max. pressure:280 bar Power:250 A...

...The device depth is partially under 20 cm. Therefore, they can be easily installed in the bathroom, kitchen, hallway, or a storage room. A second heat exchanger heats water for the respective draw-off points in the kitchen and bathroom using a continuous flow method. Since only short pipes are required to the draw-off points, distribution losses are also low. A sliding control ensures energy-saving operation. A chimney can be omitted if the device is installed in the attic. Here, a flue gas connection is sufficient.

... specified in the 2014/34/EU directive, Gas, Zone, and ignition temperature protection to Ex II 2G c Ex e IIB T4. Easy installation All models come with a 650 mm long extended motor cable for electrical connection. Efficient performance High-efficiency fan wheels made of pressed aluminum mounted directly on an AC motor. The fan unit is designed to provide high performance characteristics. Warranty Each...

... for short, is used for the precise measurement of air or gas volume and mass flows of 100,000 m³/h. The core of the VMF® system is the FlowProcessor, a PC system with the corresponding data acquisition hardware. Venturi nozzles convince by a low remaining pressure loss and are suitable for flow measurement of gases with high temperatures. The software developed under LabVIEW is operated either via touch screen or with mouse and keyboard.

... thresholds. - Automation cycle failure. - Negative gas sensor. - Insufficient flow in the measuring cells. - Disconnection from the HORA central unit. - Lack of electrical or pneumatic power. - Breakage of the control fuse of the central unit.

... (fiberglass, PTFE, PE, stainless steel, etc.) meet industry standards in size and fineness. A wide selection of filter housings for various requirements, flow rates, and applications (heated, high temperature, high pressure, etc.) Particle separation up to 99.99998% @ 0.1 µm (gas), low differential pressure, long service life, and very easy operation. Filter fineness: Up to 0.1 µm Material: Housing...

...The compact Promass A is ideal for continuous process control in the most demanding applications. Its unique self-draining single-tube system allows for accurate liquid and gas measurement at minimal flow rates and high pressure. With its innovative separate measuring converter, Promass A 500 offers maximum installation flexibility and operational reliability in challenging environmental conditions. Heartbeat Technology ensures compliance and process safety at all times.

...ATEX suction system with localized capture and gas detection - suction system for securing the production and aerosol packaging department, with localized capture for ventilation and remediation of areas affected by aerosol product vapors and alcohol-based products - ATEX fans zone 1 - Electromechanical control dampers for flow interception - ATEX localized capture suction arms zone 1 - ATEX...

... packaging, thermo forming, flow pack or chamber packaging machine. The gas mixing systems are adjusted to your specific product type and processing and require only basic installation requirements. WITT system solutions are developed in close collaboration with national food and research institutes. WITT is approved and certified according to ISO 22000 for food safety.

... of configuration and system integration: side access, separate display, enhanced connectivity options. Heartbeat technology ensures reliable measurement and compliance verification. Max measurement error Mass flow (liquid): ±0.1% Max measurement error Volumetric flow (liquid): ±0.1% Max measurement error Mass flow (gas): ±0.35% Max measurement error Density (liquid): ±0.0005 g/cm³ Measuring...

... environments. To operate the mobile heater, all you need is a power outlet thanks to the integrated power cable. The warm air flow of the TDS 19 E can be precisely adjusted, without interruption, using the built-in thermostat, and its heating power can be tempered according to need, with the two-level power control. Additionally, there is also a fan operation without heating function. Power supply: electric Installation: portable...

...-quality products. For flow meters and variable area flow meters, our prices range from CHF 800 to CHF 2,500. A novel concept for cost-effective gas flow measurement. The Porter VCD flow controllers have been developed for analytical devices (e.g., GC, HPLC, etc.). Based on the principle of differential pressure, the VCD serves to maintain a gas flow at a constant inlet pressure at a set value. Capacities from 0.5 cm3/min to 1500 cm3/min. pkmsa.ch...

... body models: Stainless steel; Bronze; Brass Other control models: Piston actuator in: Brass (chrome-plated), Stainless steel, Plastic; Diaphragm actuator in stainless steel Application: Gas, vapors, liquids...

... integration into packaged systems. Also available through Arm-Tex is the Smith Meter® Ultra Series. Backed by FMC Technologies, the Ultra Series is the cutting edge solutions for custody and non-custody transfer measurement applications. This non-intrusive design has no moving parts to provide a low maintenance measurement solution and offers a wide dynamic flow range, wide viscosity application range with low differential pressure. Applications include: blending, batching, dispensing, inventory control, and custody transfer of oils, solvents, chemicals, paints, fats, and fertilizers.

...We manage flow calibrations according to ISO17025, with adjustment, for practically all flow meters available on the market. We can provide DAkkS certification, equivalent to ENAC, for all calibrations. We have the capability to perform Real Gas Calibrations, ensuring performance that is representative of actual operating conditions. We can calibrate with argon, helium, as well as their...