extruded parts

...Extruded sections – plastic profiles, handles, and hoses manufactured by extrusion from various materials (PVC, PE, PP, ABS, and TPE) with different physical characteristics, in different shapes and colours, with different finalization (cutting, coating, printing, embossing, marking). ...

...Round plastic ventilation pipes are joined by welding (or PVC gluing up to ø250). Manufactured in accordance with DIN 8062 standards for ventilation pipes. PVC pipes of larger diameter than 500mm are made of sheets. Pipes made of PP, PPs, PE and PPELs are extruded. Other wall thicknesses are available on request.

...Production of extruded seals in the best materials for optimal solutions BORFLEX® produces extruded seals that ensure water, air, and noise tightness, from design to manufacturing of parts of all sizes. We also offer flame-retardant or self-extinguishing elastomers that are halogen-free, in accordance with the strictest standards for fire behavior and smoke toxicity. BORFLEX® masters all...

...the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. The Plastic Extrusion profiles widely use for auto parts, light rail train fittings, lamps and lanterns, refrigeration industry, household electrical appliances, stationery, warehousing and other enterprises to provide quality support services. If you need any plastic PVC extrusion pipes or complicates structured profiles,welcome send your drawings and samples to us for a quote.

...extruded heat sinks, die-cast heat sinks, as well as finger heat sinks and U-shaped heat sinks, along with the corresponding accessories like mounting clips for fastening. Extruded profile heat sinks are considered classics among PC board heat sinks. We gladly recommend them for use in the board area as they are versatile and can dissipate relatively large amounts of heat.

...Semi-finished products and custom-made parts from coal, extruded and isostatically pressed graphite...

Most modern production facilities at the Herford location Located at an easily accessible site directly off the A2 motorway, the German location of INOMETA is situated here. The company boasts more than 16,000 square meters of state-of-the-art production space across three halls, including a fully automated high-bay warehouse with over 1,800 cassette slots for the daily supply of goods such as al...

...Extruded rubber and silicone profiles are used, inter alia, in civil and water engineering, transportation, automotive industry, industrial appliances, household appliances, food processing, medicine and other industries. Basic profiles of round and rectangular geometries. Profiles of the individual geometry [see more…], Hoses with diameter from 0.3 mm to 150mm Massive profiles in hardness...

...Custom cold-formed pressed parts for automotive applications Series production of custom cold-formed pressed parts according to customer specifications. Manufacturing of extrusion products in the automotive sector.

The Linn Präzision Group has been a competent partner for customers in the automotive supply industry, aerospace sector, plastics, foundry, and electrical industries since 1965. Our wide range includes turned parts, cold flow-pressed parts, and fasteners in the areas of stamped-bent parts, wire-bent parts, and pipe-bent parts. A particular focus for standard parts is on DIN 16903, which we keep i...

... from sectors including maritime and nuclear; mining and extraction; energy, oil and gas; seals and machinery; and the metal and chemical industries, among others. Working in close cooperation with you, Hannecard’s technicians can create the precise extruded profile or molded parts that you need, based on the dimensions and specifications you provide. We are always eager to help you select exactly the right type of elastomer, and our team of experienced professionals are on hand for dedicated follow-up for your project.

...Roll-up and motorized piano gate made of extruded aluminum slats with double high-strength walls. Noise-reducing joint seal. Side sliding pads in nylon. Upper box and side panels made of folded sheet metal. Anti-rust painting RAL 7001/7038 (for the sheet metal parts)...

... column chamber • Internal cable routing • IPC and keyboard shelf holder can be positioned individually • IPC holder with graduated tilt control • Optional integrated control elements (to fulfil the Machine Directive 2006/42/EG) • Column of high-quality extruded aluminium sections (naturally anodised, 2-chamber column) • Customer-specific length of the column possible Material:Aluminum...

...aluFACE is an extremely versatile and adaptable command container, available in six different versions made of die-cast aluminum with a window featuring extruded aluminum profiles. It is ideal for any type of command and industrial information technique. Inside, mounting domes for motherboards, support rails, or mounting plates are already pre-installed. You can find the appropriate suspension system in the corresponding product category on the ROLEC website. EN AC 44300/EN AC-44200 (DIN EN 1706): Aluminum...

...The sleeves are manufactured in various head and shaft geometries. Due to the economical production on our multi-stage presses, significant cost savings can be achieved compared to conventional turned parts.

...tufa, etc., which are crossed by passing electrical cables and/or technical tubes in general (gas, plumbing, etc.). Dust, soil, sand, loose parts, rust, and layers of paint of the pipes and old deteriorated sealant material must be removed with pressurised water or brushing, before applying the compound. The inner surface of the tube/hole containing the passing cables should be damp or wet. To...

... equipped to be antistatic, electrically conductive, and flame retardant. PE foam is ideally suited for durable cushioning and protection against impact, especially in packaging applications. When equipped with antistatic properties (colored pink), it is used for packaging electrostatically sensitive devices. Delivery forms: - Sheets - Cut pieces - Contour cuts - Strips - Stamped parts - Construction parts - Rolls - Antistatic versions - Electrically conductive versions - Self-adhesive versions We are happy to advise you and...

... directions. In extruded qualities, despite identical grain size, there is a certain orientation, which can lead to differences in properties both parallel and perpendicular. GleitTherm® G 400 | G 450 | G 600 Parts made from graphite composite materials In addition to pure graphite materials, there are also graphite-reinforced materials with lower temperature resistance. In a resin matrix, reinforcement fibers and graphite are incorporated as a lubricant. These materials provide an alternative when higher compressive strength is required, but the...

...PE foam white 1.5 mm double-sided adhesive covered with blue, siliconized polyethylene paper Adhesive: modified solvent acrylic Thickness: 1.600 mm Adhesive strength: 18 N/25 mm foam tear Temperature range: -40° C to +80° C The foam adhesive tape is characterized by a high initial adhesive strength, even on rough and critical structural surfaces. The high-performance adhesive is suitable for bonding extruded plastic parts such as trims, hooks, profiles, cable ducts, signs, holders, and dispensers. Rolls: 50 m Width: 6 to 1250 mm available as die-cut parts...

...In its multiprocess approach, GEFICCA also stands out for its ability to produce extruded and finished parts. This elastomer shaping process involves continuously pushing the fluidized material through a die that has the cross-section of the desired part. The profile is then vulcanized in batches in an autoclave before being finished through hot vulcanization. • Extruders ranging from 30 to 150 mm in diameter • Autoclaves • Finishing presses...

... that are close to perfection, requiring little to no post-processing. Progress Silicones offers a wide range of outer or inner shapes ranging from a few tenths to a few millimeters in thickness (over 5000 dies). THE CO-EXTRUSION TECHNIQUE Extrusion can lead to various processes, one of which is co-extrusion. This involves the addition of two extruded products that will merge into one. A hollow O-ring can thus be filled or injected through the co-extrusion process.

...Manual clamping serves only to hold in position. The creep behavior of the tightly clamped plastic results in a decrease in clamping force (up to 70%) over time. Therefore, it is prohibited to clamp parts that affect safety. Matching sliding rails see 21200. Drawing indication 1) Manual clamping Reference: 21200 Sliding carriage body: extruded aluminum EN AW-6060 Sliding elements: iglidur J plain bearing Cover: plastic...

... equipment. They can be deployed in a half-barrel A-frame shape, and we can adjust the wind and snow load to your specifications. The Sunshade shelter for aircraft and equipment is easy to install on a concrete platform and can be weighted down or anchored to the ground. This extremely versatile protection solution consists of an extruded steel or aluminum frame and a fire-retardant PVC-coated roof cover. This canopy also comes with galvanized steel mounting parts for added robustness. Size: Fully customizable Waterproof: Yes Fire-retardant: Yes Anti-UV: Yes...

... for sealing, silencing, insulating, channelling and protection. Whether you are looking for tubing, sleeving, strips, cord or complex profiles, we can supply the extrusion you need, whatever the specification. If you need something specific we can produce bespoke rubber extrusions especially for you. Need special extruded rubber requirements? • High temperature adhesive backing can be added if required. (Please specify when you place your order). • We offer a cut to size service and can meet requests for particular lengths including longer ones. • Lathe cut washers.

... profiles, carpentry, industrial bodywork, construction and layout, urban furniture, energy and photovoltaics, pool fittings, railways... We study your project, ensure the procurement of raw materials if needed, and manage storage. We machine, cut, and assemble your custom parts up to a length of 9m and a width of 400mm. Our metrology equipment allows us to verify the conformity of the parts.

...Widths: any width up to 300 mm Various hook shapes, palm styles, neck lengths, densities Colors: black, white, transparent Materials: PA, PP Presentation: rolls Converting: special widths, cutting to length, printing, self-adhesive equipping, molded parts, ultrasonic welding, sewing...

...PEEK material (chemically known as polyetheretherketone) is manufactured by Ensinger in the form of standard semi-finished products for further processing. It is extruded into sheets, rods, and tubes from the ARKPEEK polymers. PEEK is a unique semi-crystalline, technical thermoplastic that also offers excellent chemical resistance. Parts made from the high-temperature PEEK polymer can be used at...

... Origin: China Application: Industrial Surface Treatment: Anodizing Shape: Round Technique: Extruded Hardness: 99-200 Alloy Or Not: Is Alloy Al (Min): 90% Yield (≥ MPa): 275 Temper: T3 - T8 Ultimate Strength (≥ MPa): 425 Supply Ability: 1000000 Ton/Tons per Week Packaging Details: standard export package or as your requirement Payment term: T/T,L/C etc. Port of shipment: Xiamen ,China...

...Extrusion (Profiles) Extruded materials: Natural (NR), Silicone (SIL), EPDM Approvals: Food (FDA, ACS, CE 1935/2004) Colors: Standard or according to RAL Quantity: Prototype to series Dimensions: From 10 g/ml to 12 Kg/ml Optional addition: Adhesive, talc Tooling: In-house manufacturing...

...Injection molded and extruded blow parts for chain hoists...