Round plastic ventilation pipes are joined by welding (or PVC
gluing up to ø250). Manufactured in accordance with DIN
8062 standards for ventilation pipes. PVC pipes of larger
diameter than 500mm are made of sheets. Pipes made of
PP, PPs, PE and PPELs are extruded. Other wall thicknesses
are available on request.
Ventilation bends 45˚ made from expanded polypropylene (EPP).
Bends are produced in diameters 125, 160 and 200 mm. The
standard wall thickness is 15 m...
Round plastic ventilation pipes are joined by welding (or PVC
gluing up to ø250). Manufactured in accordance with DIN
8062 standards for ventilation p...
The fire dampers are manufactured in the following nominal
sizes DN100, DN125, DN160, DN200. The fire dampers are
equipped with a thermal fuse mechani...
The SLC and SRC rectangular duct silencers reduce the noise
level in ventilation and A/C systems. This silencer type is usually
installed between a fa...
The FDABURML coupling module is a combination of an air
valve and a fire damper, coupled with a single housing. This
is an alternative to typeical fir...
GCR swirl diffuser is equipped with fixed blades bent
at a constant angle. It is made of galvanized steel sheet,
powder coated in RAL9010. Swirl diffu...
The FLX-PLO-EPP-F plenum boxes are part of the FLX-REKU
air distribution system designed for domestic mechanical
ventilation systems, so-called the ...
The silencers are delivered with the SPIRAL®
system seals in
the standard version. The diameter sizes d1 > 315 mm require
ordering the NSL male coupli...
The RACAV constant air velocity regulator keeps the air output
steady in ventilation systems. The device works without
any electric power supply and f...
ILA maleend flexible duct connectors are used for joining
two round SPIRAL or plain ducts. They are most often used
for connecting air handling units,...
Pressed bends are designed for building ventilation systems
based on spiral and plain ducts. Seam welds provide air
tightness class D without the need...
The smog filter is designed for effective filtration of the
socalled particulate matter. The PM2.5 and PM10 particles are
the main component of smog, ...
The DSQWA rectangular multiblade aluminium dampers can
be used to control and isolate air flow in rectangular ductwork.
The dampers can be installed i...
The HRUSlimAIR heat recovery unit is designed for
residential buildings. The HRU has a capacity of 250 m3/h
@ 100 Pa, generated by energyefficient EC ...
The HRUSlimAIR heat recovery unit is designed for
residential buildings. The HRU has a capacity of 250 m3/h
@ 100 Pa, generated by energyefficient EC ...
Ventilation bends 45˚ made from expanded polypropylene (EPP).
Bends are produced in diameters 125, 160 and 200 mm. The
standard wall thickness is 15 m...
Round plastic ventilation pipes are joined by welding (or PVC
gluing up to ø250). Manufactured in accordance with DIN
8062 standards for ventilation p...
The fire dampers are manufactured in the following nominal
sizes DN100, DN125, DN160, DN200. The fire dampers are
equipped with a thermal fuse mechani...
The SLC and SRC rectangular duct silencers reduce the noise
level in ventilation and A/C systems. This silencer type is usually
installed between a fa...
The FDABURML coupling module is a combination of an air
valve and a fire damper, coupled with a single housing. This
is an alternative to typeical fir...
GCR swirl diffuser is equipped with fixed blades bent
at a constant angle. It is made of galvanized steel sheet,
powder coated in RAL9010. Swirl diffu...
The FLX-PLO-EPP-F plenum boxes are part of the FLX-REKU
air distribution system designed for domestic mechanical
ventilation systems, so-called the ...
The silencers are delivered with the SPIRAL®
system seals in
the standard version. The diameter sizes d1 > 315 mm require
ordering the NSL male coupli...
The RACAV constant air velocity regulator keeps the air output
steady in ventilation systems. The device works without
any electric power supply and f...
ILA maleend flexible duct connectors are used for joining
two round SPIRAL or plain ducts. They are most often used
for connecting air handling units,...
Pressed bends are designed for building ventilation systems
based on spiral and plain ducts. Seam welds provide air
tightness class D without the need...
The smog filter is designed for effective filtration of the
socalled particulate matter. The PM2.5 and PM10 particles are
the main component of smog, ...
The DSQWA rectangular multiblade aluminium dampers can
be used to control and isolate air flow in rectangular ductwork.
The dampers can be installed i...
The HRUSlimAIR heat recovery unit is designed for
residential buildings. The HRU has a capacity of 250 m3/h
@ 100 Pa, generated by energyefficient EC ...
The HRUSlimAIR heat recovery unit is designed for
residential buildings. The HRU has a capacity of 250 m3/h
@ 100 Pa, generated by energyefficient EC ...