direct acting

...DA presses are the consistent implementation of modern press technology for direct-acting pneumatic presses. Their modular design allows for the selection of exactly the dimensions needed for the specific application. This optimizes the price-performance ratio. DA type direct-acting pneumatic presses are available in various sizes with a pressing force of 1.5 kN to 34 kN and extensions up to 300...

...The valve 2610 is a direct-acting, media-separated lift anchor valve. Therefore, the valve is particularly suitable for applications with critical media.

... presses generate their force consistently over the entire stroke length. All direct-acting pneumatic presses are available either as automation components or with IPS controls for individual workstations. The processing of sheets, circuit boards, or other bulky parts requires a larger reach of the presses. XL-DA presses with 250 mm and 300 mm reach enable the processing of these workpieces as well.

...Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#direct-acting...

...Direct acting valve, 15 mm width, two individual electrical connection possibilities. Function:3/2-way NO  Pressure range:0 - 5 bar Nominal orifice:1.3 mm Type of pneumatic connection:Flange  Kv-value:0.65 l/min Size:15 mm Actuation type:electrically actuated  Duty cycle:100 % ED Type of electric connection:Plug pins / pins  Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal...

...and fruit trees. 50 g in the planting hole for tomatoes. 100 g/m² at the start of new lawns (promotes rooting). 100 g for lawn maintenance. Crushed horn should be spread on preferably moist soil: rake it in well to incorporate it into the ground. Direct use during sowing poses no risk to roots and young plants. A concentration of nitrogen for all plants and shrubs in need. Composition: NITROGEN (N): 14% Phosphorus (P2O5): 0% Potassium (K2O): 0% WEIGHT: ND DIMENSIONS: ND WEIGHT: 20 kg, 10 kg, 25 kg, 3 kg, 5 kg...

...The direct-acting pressure regulators with sensitive diaphragm and spring, balanced valve, model P130H are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon, and other gases or liquids compatible with the construction materials and design of the regulator. This regulator is specifically designed for high-purity gas systems found in pharmaceutical, cosmetic, fine chemical, and food and beverage processes. Sizes: 1" - DN25 Maximum operating pressure: 16 bar Maximum operating temperature: 150°C Nominal pressure: 0.2 to 8 bar...

...such as for hemming drapes, net curtains, quilts and duvets, blind hemming bindings on car seats etc. The advantages of MAIER blind stitch sewing machines - Single thread chain stitch, i.e. fast, robust, problem-free and economical. - Perfect seams with extremely precise and even stitching - High productivity with sewing speed of up to 3,000 stitches per minute. - Easy to handle with secure and easy fabric guide system. - Easy to reproduce the plunger setting when changing materials. The stitch depth can be reset very rapidly from sheer to thick materials by turning the direct-acting set...

... it has a limitation on the combination of orifice and pressure rating it can provide for a given solenoid force. There are some exception designs which are called pressure balance solenoid valve design but apart from that most of the 3 way direct acting solenoid valve design has this limitation. Model:P3005 Pressure Range (Bar):0-10 Orifice Size (mm):5 Port Connection:3/8" | 1/2" Solenoid:Weather...

... cooling systems for energy efficiency and product-friendly batch cooking processes The use of water heating and cooling systems, as well as hot water modules, represents a significant gain in energy efficiency and additionally offers improved process execution compared to the direct use of steam as a heating medium. Water heating and cooling systems provide optimal conditions, especially for horizontal agitators.

We are a flexible manufacturing company with high-quality products that are entirely Made in Italy. We design and produce brass and stainless steel solenoid valves for fluids, water, air, liquids, gases, and steam, including ATEX-certified explosion-proof versions. Thanks to our very close supply chain, we maintain strict control over the supply of components designed by us. Combined with 100% t...

...Shipping liquids and chemical products? 2hm logistics offers this type of service for the regular intra-European flow along with direct coverage of trade between the Far East and Europe, acting as the official agent for Exodus Tanks. With the support of partners within this group of interconnected ISO tank suppliers, we also provide all other options alongside the Cross Trade option.

...Type 15A is a 2/2 way solenoid valve, normally closed or open, body made of brass, direct-acting, DN 1.2 – 4.0 mm, G1/8. Design: 2/2 seat valves, normally closed or open, coil rotatable by 360° Actuation: electric, manual actuation optional Connection: G1/8 Ambient temperature: -5 °C to +50 °C, higher permissible ambient temperature upon request Medium temperature: depending on sealing material...

... kN. Direct-acting presses - Forces from 1.6 to 43 kN - Stroke lengths from 50 to 300 mm - Working heights 1,020 mm Knee lever presses - Forces from 15 to 60 kN - Stroke lengths from 12 to 60 mm - Working heights 90-1,020 mm Pneumatic presses with process monitoring - Forces from 1.6 to 43 kN - Stroke lengths from 50 to 150 mm - Working heights 50-500 mm...

...The direct-acting 2/2-way solenoid valve GEMÜ 102 features a fully plastic-coated drive magnet. The sealing to the magnetic armature is achieved through a PTFE bellows and an additional safety membrane. The valve body is available in various materials and as either a straight or angled body. • Good cleanability • Hermetic separation between medium and drive • Magnetic drive can be replaced...

... mounting, direct-acting force sensor integrated into the joining ram, force measurement accuracy of 0.5% of the final value, displacement measurement sensor (absolute encoder) directly mounted on the ball screw, repeatability of displacement measurement of 0.01 mm at approximately 20 mm/s, resolution of displacement measurement 0.003 mm, illuminated field for displaying the joining status, ram speed...

... substances completely without any chemicals. After a thorough rinse followed by drying, you will achieve a streak-free surface even in direct sunlight. Additionally, our high-tech water significantly reduces the static charge on the glass surfaces being cleaned, which also helps prevent re-soiling.

... with purge gas connections, b) a decompressed carbon ring — labyrinth seals with purge gas connections, c) double-acting mechanical seals, oil purge d) double-acting mechanical seals, water purge Transmission shaft with radial ring seal. FLOW DIRECTION: Vertical, top to bottom TRANSMISSION: Direct via flexible coupling or through a soft coupled gear. Belt drive (up to 250 kW transmission power...

... versatility and selection of the best impact angle. • extension construction in lightweight AL with a triple coaxial sector (maximum reliability) to prevent contamination between the product, atomization air, and imprint control air. • direct control on the gun body of 3 atomization parameters: product flow - primary atomization - imprint development air.

...A240 NAMUR Type 3/2 - 5/2 Convertible Solenoid Valves Proval A240 type general-purpose 3/2 way and 5/2 way solenoid valves with namur interface configuration are interchangeable for use on either double and single acting pneumatic actuators. General Features, * Direct mounting on NAMUR interface actuators * Easy convertible between 3/2 and 5/2 way(DA or SR) by replacing the o-ring position * Lockable manual operator * Standard IP65 enclosure single coil (spring return),...

... magnetic yoke component group. If the coil is deactivated, the leaf spring joined to the flat armature presses the seal positioned on the spring-armature assembly unit against the valve seat. These quick-acting valves owing to the small mass of the installed armature achieve switching phases in the millisecond range. As these valves predominantly featuring cartridge connections have an almost frictionless armature movement, they have a capacity of up to 4 billion actuations, depending upon operation mode. Spider valves may also be triggered via so-called pulse width modulation. ...

...Our valves are designed to control the flow rate of water in household and industrial appliances by opening or closing the passageways. We produce: Standard solenoid valves Bistable latching valves Direct acting valves Proportional valves - Patent Pending Our dedication to the valve for over 20 years has enabled us to provide customized high quality solutions - we take your concept and...

... store and to clear it -Excellent tiredness endurance within the framework of repeated use -High strength to impacts, even under negative temperatures -Good strength to chemical agents and humidity -Very high strength to cuts and abrasion -Excellent maintenance of the specifications during time (not much ageing) The Railflex system is acting bith dynamically and kinematically. 1. DYNAMIC : The...

...General Purpose Solenoid Valves Series: S10 Series Application: Air, Water, Gas (it is recommended to install a filter at the valve inlet for dirty fluids) Size: 1/8", 1/4" Direct Acting, BSP (NPT available upon request) 3/8"…2" Pilot Operated, BSP (NPT available upon request) Pressure: 0…16 Bar (1/8", 1/4") 0.5…16 Bar (3/8"...2") Body, Core: Stainless Steel Body: Brass Diaphragm: NBR, EPDM...

...Non-metallic guide rings prevent wear and damage to the cylinder bore and the sealing surfaces of the piston rod. The radial loads acting during the sliding motion are absorbed by the guide rings; at the same time, direct contact between the metal surfaces is prevented. This increases the lifespan of the cylinder components and seals.

... - Replaceable magnetic drive without removing the valve body from the pipeline - Hermetic separation between medium and drive Operation: direct-acting Ways/Positions: 2-way Function: normally closed, normally closed contact Medium: for gas, hydraulic Body: plastic, threaded, chemical-resistant Additional features: DIN, with safety membrane...

...Brass Direct-Acting Solenoid Valve G 1/4, Dy 3.2 mm - Solenoid valves are devices that use an electromagnetic actuator to control the flow and stopping of fluids in pipelines. Solenoid valves are designed for integration into automatic systems in machine engineering, energy, chemical industry, and more. Catalog No: EMV 9202000 (G 1/4; Dy 3.2; 2/2 way) EMV 9202000 High-quality solenoid valve...

...Simple acting, without self-centering, NO function Versions: Flat, Round, Compact Grippers, optional sensing for Flat and Round Grippers The RPGA series with a 20 mm piston diameter stands for direct force transmission to the gripper fingers, ensuring a secure grip and high holding force. The design and the associated high gripping force are particularly suitable for the removal of molded or drawn workpieces. The hard-anodized metallic surfaces provide high wear protection. Versions D and E feature a groove for the attachment of switching elements.

...Series / Type AL 01 2/2 Way Solenoid Valve / Direct Acting Function: Valve is closed in rest position (NC). The energized solenoid directly opens the valve seat. Technical Data Connection: G 1/8", DIN ISO 228 Installation Position: Any. Preferred with solenoid upright. Flow Medium: Neutral, gaseous and liquid media. Viscosity: 22 mm² / S Valve Housing: Pressed Brass MS 58 Metal, Internal Parts...