tinyTracker 172 nm: Band radiometer for precise measurements for 172 nm xenon

The radiometer RM-12 is a precise, hand-held device for measuring irradiances and illuminances. Due to the sensor-integrated electronics, different sensors for UV and visible spectral ranges can be measured with the respective sensors. Sensors evaluating biological effects of irradiation are also available. The integrated diffuser serves to provide the cosine correction that is necessary with non-perpendicular irradiation. The sensors are calibrated with traceability to the PTB; after being calibrated, they are supplied with a factory calibration certificate. Repair and spare parts service is, of course, available for many years. The sensors can be supplied with different measuring ranges. APPLICATIONS: Measurement of UV lamps, UV LEDs, and light sources Controll of UV irradiation Measurement of job security due to artificial optical radiation Photometric measurements

The curelog is a precise radiometer with dose measurement and up to four spectral ranges. Due to its fast and precise measurements the curelog can universally be used for applications in the fields of lacquer curing, bonding, sterilization, disinfection, lithography and many other applications. The adjustable data recording rate of up to 2000 Hz (measurements per second) allows reliable measurements on fast running UV belt systems. The recording time of up to 180 h allows the measurement of long-lasting processes at low doses, like UV disinfection. The curelog simultaneously records up to four spectral ranges, each with a high-precision 24 bit ADC. The high-precision ADC gives the curelog a extrem high dynamic range. The resolution of 0.0001 mW/cm² and a measurement range of 50 W/cm² are the main features of the curelog. All common UV lamps and UV-LEDs can be measured and compared, no matter if spot or area lamps, fibre optics or UV/VIS LEDs are used.

The mains-driven panel meter RM-32 provides a continuous and precise measurement of irradiance with preamplified UV sensors. The integrated electronics produce a signal voltage that is transmitted to the radiometer, so that inferences are minimized. Different UV and visible spectral ranges, measuring ranges, and output signals can be selected to match the measurement task. The current irradiance is shown on a 3.5-digit digital display. The lamp state with respect to two threshold values is indicated by LEDs. Two relay contacts can be used for switching warning and failure signals. With its optional USB, RS232 or RS485 interface the RM-32 can be used to monitor ultraviolet (UV) irradiance. Control of light sources and irradiation systems Precise measurement of irradiances UV monitor for process control and documentation

tinyTracker dosimeters are autonomous instruments for irradiance and dose measurement in UV belt systems. Due to the particularly flat design of the tinyTracker, this can be performed by irradiation of UV conveyor dryers and other industrial equipment. The recording of values automatically starts when exceeding an adjustable minimum irradiance. The integrated radiometric sensors can be configured for different UV and visible spectral ranges. The integrated diffuser serves for cosine correction that is necessary in non-perpendicular irradiation. The sensors are calibrated to PTB. The data recording is done on a removable SD card, data transfer - via USB. The power is supplied by a Li-Ion battery that provides a recording time of up to three hours. The Li-Ion battery can be charged directly via the USB interface. An additional power supply unit is included. The analysis and data export are done conveniently using a PC. HIGHLIGHTS OF TRACKER FOR UV CONVEYOR BELTS