Optical systems - Import export

PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

The projector series PRE is an economical projector with an ultra-thin design and superior thermal performance. This projector is the solution to all your outdoor lighting needs thanks to its IP66 and IK08 protections. Our innovative optics system will serve to cover any area you want to illuminate very evenly. The implementation of SMD LED technology through the use of lenses Specialized provide superior light efficiency. NF2W757GRT-V3 Japanese technology of high efficiency and durability. The new LED projector serie PRE has been specially designed to ensure excellent performance on sports courts and advertising spaces. With more industrial design, the PRE Series LED projector maintains the same levels of safety, durability and warranty as PRM Series LED projectors, at a lower cost.

ETC Source Four Zoom XT 150W 15°-30° white ETC combines the industrys standard Source Four Zoom optical system with a unique, waterlight housing to create the Source Four Zoom XT. Powered by the 12.000 hour Master ColorTM CDM lamp, Zook eX is rated IP 65 for exterior lighting use and is ideal for gobo / pattern projection and tight shutter cuts on specific structures or architectural details. The forward portion of the housing removes completely for beam sizing, focus, gobo insertion and shutter cut adjustments. The removable housing is designed to hang conveniently on the yoke, freeing both hands for focus. ETC Source Four 150W HID Zooms are supplied with Philips CDM Master Color 150W veramic metal halide lamp, colour frame and 1,8m cable without connector. Feature Physical Rugged, the cast and extruded aluminium construction unique waterlight exterior housing seal Precision extruded optical rails with positive lens position lock-down 20 gauge stainless steel shutters in a tri-plane assembly Roating shutter assembly +/- 25° slot for glass or stainless steel gobos / patterns waterlight electronic ballast housing Tilt-down ballast housing for convenient lamp change CE compliant Electrical » ≫ 150W electronic ballast (yoke mounted) » ≫ Less than 14 Amps inrush current, lasts less than one AC cycle (16.7mS) » ≫ Select breakers that meet or exceed the in-rush and ampacity requirement » ≫ Less than 10% Harmonic distortion » ≫ Greater than 95% Power Factor » ≫ 90% Ballast Efficiency » ≫ 230V ± 10%, 50-60Hz » ≫ 0.74A operating current Optical » ≫ Optimised optical system for improved photometric » ≫ performance and field uniformity » ≫ Faceted borosilicate reflector with dichroic cold mirror coating removes greater than 90% infrared radiation (heat) and reflects greater than 95% of visible light » ≫ Reflector and lenses secured with anti-vibration shock mounts » ≫ Two bi-convex lenses with anti-reflective coatings » ≫ Low gate and beam temperature, shutters will not warp or distort Lamp » ≫ 150W Ceramic metal halide150W Philips MasterColor ® CDM lamp » ≫ 3000 K colour temperature » ≫ 12,000 hrs. lamp life » ≫ Optional 150W Philips MasterColor CDM 4,200K colour temperature (96 CRI) lamp available » ≫ IP65 » ≫ mass: 78,5x27,6x25,9cm » ≫ beam: 15° - 30° » ≫ weight: 16,3kg Konformitätserklärung source four

ETC Source Four Fresnel, black With the Source Four HID you have the power of a Source Four fixture with 575 watt available, the service life of 2000 hours shall be extended by a further 10000th This provides 150W metal halide lights you all the advantages that made ​​the Source Four famous habem: the cool beam, the sharp and clear image and a bright, uniform light field Technical data: Lamp 70W metal halide Color Temperature: 3000K interchangeable Linsenset HID versions: Source Four with fixed focus and zoom electronic ballast with 120V, 230V or 277V on the bracket mounted 12,000 hrs lamp life for architectural applications Color: black (other colors upon request) Delivery includes: color frame, Linsenset, 1.5 m cable without plug, with bulb SPECIFICATIONS > Rugged die-cast aluminium construction > Convenient full-size zoom adjustment knob > Unique HPL Quick eXchange socket enables easy lamp changes > Sliding yoke mount for variable balance point > Fully enclosed accessory slots for no light leak > CE compliant ELECTRICAL > 230V-240V, 50/60Hz > High temperature silicone-rubber 1.5m power cable OPTICAL > 175mm aperture > Zoom Range: 9 ° -52 ° beam angle; 20 ° -65 ° field angle > True fresnel optical system for good barn door beam shaping characteristics > Glass reflector with dichroic coating optimized for HPL lamp performance LAMP > HPL - compact tungsten filament contained in a krypton/xenonfilled quartz glass envelope (see table for suitable lamp types) > Uses same lamp type as all Source Four fixtures for common inventory > 375W, 575W and 750W (max.) lamp options > Patented filament geometry makes for extremely efficient light collection and transmission > Integral die-cast aluminium heat sink lamp base

ETC Source Four Fresnel, white With the Source Four HID you have the power of a Source Four fixture with 575 watt available, the service life of 2000 hours shall be extended by a further 10000th This provides 150W metal halide lights you all the advantages that made ​​the Source Four famous habem: the cool beam, the sharp and clear image and a bright, uniform light field Technical data: Lamp 70W metal halide Color Temperature: 3000K interchangeable Linsenset HID versions: Source Four with fixed focus and zoom electronic ballast with 120V, 230V or 277V on the bracket mounted 12,000 hrs lamp life for architectural applications Color: black (other colors upon request) Delivery includes: color frame, Linsenset, 1.5 m cable without plug, with bulb SPECIFICATIONS > Rugged die-cast aluminium construction > Convenient full-size zoom adjustment knob > Unique HPL Quick eXchange socket enables easy lamp changes > Sliding yoke mount for variable balance point > Fully enclosed accessory slots for no light leak > CE compliant ELECTRICAL > 230V-240V, 50/60Hz > High temperature silicone-rubber 1.5m power cable OPTICAL > 175mm aperture > Zoom Range: 9 ° -52 ° beam angle; 20 ° -65 ° field angle > True fresnel optical system for good barn door beam shaping characteristics > Glass reflector with dichroic coating optimized for HPL lamp performance LAMP > HPL - compact tungsten filament contained in a krypton/xenonfilled quartz glass envelope (see table for suitable lamp types) > Uses same lamp type as all Source Four fixtures for common inventory > 375W, 575W and 750W (max.) lamp options > Patented filament geometry makes for extremely efficient light collection and transmission > Integral die-cast aluminium heat sink lamp base

The FAN ci2 is a highly sensitive analysis instrument for the determination of the ratio of the stable isotope 13C and 12C in the CO 2 of respiratory gases. The field of application for the device are all diagnosis techniques in which tracer substances marked with the 13C stable isotope are catabolized and finally expelled through respiration. The 13C breath test analyzer FAN ci2 can be equipped with a highly stable dual beam infrared spectrometer module. So this device with its 8 or 16 ports is suitable both for medical routine diagnostics and for long term measurements with high demands for precision and stability. The included FANci–software for measuring and interpretation supports all current operating systems of the connected PC. You are free to select from more than 20 integrated breath tests, e.g. Helicobacter pylori test, liver function test, or measuring intestinal transit time. FAN ci2 is the ideal device for physicians’ office laboratories as well as for scientific institutes. Special features simple and save handling small sample volume (approx. 100ml) high performance (approx. 30 samples/h) high repeatability (standard deviation < 0.5‰) low servicing by internal checks of system status wide field of application by flexible adaptation to special questions Fields of application Medicine diagnostic studies for Helicobacter–gastritis investigation of aminoacid metabolism monitoring the circulation of bile acid detection of fat malabsorption indication of bacterial overgrowth in the jejunum specific liver function tests measurement of gastric emptying rate of solids determination of the lactase activity with 13C labeled cornstarch test of the pancreas function with the lipase enzyme Animal nutrition and biochemistry utilisation of feedstuff dynamics of metabolism Operating principle The principle of measurement is based upon the specific absorption of infrared light in the middle of the infrared spectrum between 2 and 8µm wave length (NDIR: Non Dispersive Infrared Spectroscopy). The high selectivity of the infrared detectors is obtained by filling themselves with the corresponding components, 13CO 2 and 12CO 2 respectively. The cross sensitivity of 13CO 2 to the high 12CO 2 concentrations is reduced by using a 12CO 2 gas filter in the 13CO 2 channel and mathematical hods. To yield the high accuracy the temperature is stabilized by thermostat and the system is closed to the environment. Software The control of the FAN ci2 is realized by the FANci WINDOWS®–software that guarantees an easy handling of the analyzer system and a clearly arranged representation of the results of measurements. So the user is informed about the progress of the measurements at any time. All controls needed for the routine procedures of the FAN ci2, as recording of sample data, start of measurement, evaluation and documentation of the results are easy available. All relevant system parameters are observed continuously and any disturbances in the process reported immediately. By selecting only a few system parameters, the FAN ci2 is adaptable to different questions. Via standard data interfaces like GDT, HL7 or ASTM the software can be connected to practise or hospital EDP systems easily. System configuration The FAN ci2 only consists of one unit that includes the acquisition unit and the gas management system. The gas sample–ports for the breath bags are located in front of the device. There are only two connections necessary: the power supply and the connection to the Personal Computer. The software communicate with the components of the device via USB. Simple and secure handling by in the hardware integrated sample recognition system compact design and neat layout of controls internal control with fail-save CAN bus heated gas path to eliminate residual moisture low stoppage times and service costs by internal status checks for early failure diagnosis Optical system with integrated thermostat, optimized for the measuring process new efficient IR–sources modified light modulation, optimized to the signal processing and, due to this markedly smoother output signal with lower drift insensitive to nuisance gases by higher selectivity