Optical systems - Import export

Knight Optical can offer custom Rod Lenses for use within Optical Systems. We supply a range of custom & stock Rod lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Rod Lenses are a special variant of cylindrical lenses so they focus light to a line. Rod lenses have an outside face that is polished and the ends are ground. Typical uses for rod lenses would be to generate a line image from a circular laser beam. Rod lenses can be cut at 45 degrees for use in beam steering and other similar applications. For more information read PDF …..

Knight Optical can offer Planoconcave Lenses for use within Optical Systems. We supply a range of Planoconcave lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Planoconcave lenses are simple lenses with a plane surface and a concave surface and form a moderate quality image close to the axis. Concave lenses have a broad range of applications including, focussing and control of laser beams, moderate quality imaging and other optical instruments. In a multi-element optical system they reduce the power of the system. Used on their own they form a diverging cone or virtual image. A typical use for concave lenses would be in a beam expander. For more information read the PDF ….

Knight Optical can offer Biconvex Lenses for use within Optical Systems. We supply a range of Biconvex lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Biconvex lenses are simple lenses with a two convex surfaces, usually of the same radius and have a broad range of applications including, but not limited to, focussing and control of laser beams, moderate quality imaging and other optical instruments. Read PDF for more information….

Knight Optical can offer Meniscus Lenses for use within Optical Systems. We supply a range of Meniscus lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Any spherical surface will introduce spherical aberrations to an optical system. Meniscus lenses are designed with the curvatures of the lens in mind to minimise these spherical aberrations. This effect is more noticeable with higher index glasses as spherical aberrations increase with the change in index. Meniscus lenses can be an effective compromise on cost and aberration when compared to using aspheric lenses or multiple lens. Fore more information read the PDF….

Befort maintains its own optics design & construction department. Optical designs are developed with the lens design Program ZEMAX© OpticStudio 15. The design process is particularly focused on a proper design for production. The admissible tolerances are a major factor for the price of an optical system, in addition to the selection of suitable glass. You can be assured that we will find the optimal solution for your specific problem based on our experience in the field of optics design. Optical imaging systems, laser optics and illumination systems can be measured and dimensioned with Zemax© OpticStudio 15. The 3D data of the optical design is transferred via an interface to the 3D CAD Product Design Program Inventor and with the support of Inventor the fitting mechanical solution is developed

Knight Optical can offer Precision Grade Aspheric Lenses for use within Optical Systems. We supply a range of Precision Grade Aspheric lenses for a range of applications – all individually QA checked, and metrology tested for quality to ensure parts meet customer specification. What’s more, our Precision Grade Aspheric Lenses are supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to numerous customers with optical systems. Aspheric lenses are used to correct spherical aberrations and can be as effective as a multi-lens system while taking up less physical space; therefore, reducing weight and cost. As such, these lenses are often used in military applications, such as night-vision goggles or missile guidance systems Please read PDF for more Information ….

Knight Optical can offer Cylindrical Lenses for use within Optical Systems. We supply a range of cylindrical lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with optical systems. Cylindrical lenses are designed to light to a straight line, rather than a point. Cylindrical lenses are often used to change the profile of laser beams, for example to correct for astigmatism and elliptic shape in diode lasers or to generate lines from single mode lasers. For more information read the PDF…

Knight Optical can offer Planoconvex Lenses for use within Optical Systems. We supply a range of Planoconvex lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Planoconvex lenses are simple lenses with a plane surface and a convex surface and form a moderate quality image close to the axis. They are generally used as elements within a more complex lens system or optical instrument in imaging systems, collimation, lasers and detectors. For more information read the PDF…

Micro heaters are used in devices requiring a small but accurate heat source with precise temperature control, such as optical interactive assistance systems. Allowing for targeted heating of tiny spaces, IST AG micro heaters are found across various industries, including automotive, laser manufacturing, humidification units, life-science, 3D printing and medical devices. They are a precision heat source for gas and humidity sensors, biospy or tissue samples for medical analysis, or used in malignant tumor treatment. Our micro heaters combine high-precision and long-term stability with a wide temperature range from -50°C up to +800°C and feature numerous benefits: — Fast response times — High temperature stability — Long term stability — Overheating protection — High precision — Targeted heating of tiny spaces — Tailor-made to fit customer's application Each micro heater is individually customized and designed to fit your application's requirement.

Micro heaters are used in devices requiring a small but accurate heat source with precise temperature control, such as optical interactive assistance systems. Allowing for targeted heating of tiny spaces, IST AG micro heaters are found across various industries, including automotive, laser manufacturing, humidification units, life-science, 3D printing and medical devices. They are a precision heat source for gas and humidity sensors, biospy or tissue samples for medical analysis, or used in malignant tumor treatment. Our micro heaters combine high-precision and long-term stability with a wide temperature range from -50°C up to +800°C and feature numerous benefits: — Fast response times — High temperature stability — Long term stability — Overheating protection — High precision — Targeted heating of tiny spaces — Tailor-made to fit customer's application Each micro heater is individually customized and designed to fit your application's requirement.

PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Optical Sorting Systems are a widely utilized technology used within the food industry; most particularly used in processing harvested foods such as fruits and vegetables, most notably potatoes, and nuts. Optical sorting was designed to help improve product quality, maximize throughput and increase yields. Within an optical sorting system there are four main components, the feed system, the optical system, the image processing software and last the separation system. The optical system utilizes lights and sensors housed above and below the flow of the products being inspected. It works by using a combination of light and sensors to illuminate objects; and to do this Beam-Splitters are one of the optical components used. Within the camera used in the system a Beam-Splitter cube is used to divide the light source coming from a single lens, into different channels; and each channel is filtered to a specific spectral region Read PDF for more data

Knight Optical can offer Toroidal Mirrors for use within Optical Systems. We supply a range of Toroidal Mirrors for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical Systems. Our Toroidal Mirrors are designed to minimise astigmatism when used in off-axis geometry. They are easier to manufacture than parabolic or ellipsoidal mirrors and therefore can be made much cheap with the same quality. Toroidal mirrors are used for correction of aberration in a range of scientific instrument applications such as spectroscopes monochromators and imaging devices. For more details read PDF…

Knight Optical has successfully launched a range of Stock Optical Domes for protective housing for Drone and Vision system cameras, where protection of electronic sensor systems and expensive fish-eye lenses from harsh liquid and gas environments is essential. A dome is essentially a window that has two parallel curves faces. Our domes are high quality with good form error polished faces to ensure high clarity and transmission in the Visible and NIR spectrums allowing for accurate measurement. Capabilities: Domes are readily mountable, optically clear and manufactured to a high standard. Available from 5mm to 200mm in diameter and 0.25 to 10mm in thickness offering high transmission and extreme toughness for harsh environments. For more details read the PDF ...

Knight Optical can offer Heat Filters for use in Heat Sensitive Systems. We supply a range of heat Filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in Heat Sensitive Systems. Heat Filters are designed to transmit visible wavelengths to absorb or reflect heat causing infrared wavelengths preventing it from reaching your system. Care has to be taken in the design of systems using heat filters. Absorptive blockers will heat up with use and could result in damage to the filter. Reflective blockers will redirect the heat to another location in your system. For more information read PDF ….

Knight Optical can offer KG1 Filters for use in Heat Sensitive Systems. We supply a range of KG1 Filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in Heat Sensitive Systems. KG1 Filters are designed to transmit visible wavelengths to absorb heat causing infrared wavelengths preventing it from reaching your system. Care has to be taken in the design of systems using KG1 as the material is an absorptive blocker and will heat up with use. To help alleviate the heating issue, our KG1 filters are thermally toughened For more information read PDF …..

Knight Optical can offer UV Fused Silica Windows for Vacuum Applications. UV Fused Silica is a relatively hard optical glass with a very low coefficient of thermal expansion. This means that it is a good choice for us in Vacuum applications, as any difference in temperature will not affect the optical performance. In addition to the above, UV FS has high transmission from UV to NIR meaning that there is little loss of image when it is used for a Vacuum Window/viewport and therefore the quality of the optical system is not compromised. All our UV Fused Silica Lenses are fully inspected on their quality in our ISO 9001 certified, state-of-the-art Metrology laboratory, using our Trioptics Optispheric, and Starrett AV300 and Zygo Verifire XPZ. This allows us to work to the highest QA standards and meet the tolerance specifications on these precision components Read PDF for more info

Plastic materials may crack under the prolonged exposure to a UV light source… But not Knight Optical’s Dichroic Hot Mirrors! Knight Optical can supply you with high quality and cost effective Dichroic Hot Mirrors for use in optical systems where unwanted UV or IR light negatively impacts on the system quality. This includes UV and IR Sensitive Systems, medical illumination and display fibre optics. Prolonged exposure to UV light can cause degradation in plastic materials resulting in cracking and, eventually, mechanical failure. Exposure to IR can cause undesired thermal energy and heat into the system that can damage delicate components. Dichroic hot mirrors solve this issue by reflecting UV and IR light away from the component, meaning cost We hold a massive inventory of Bandpass, Long pass, Short pass, Band-blocking and Colour-correction filters. For more information Read the PDF...

Knight Optical can offer Fire-Polished Aspheric Lenses for use within Optical Systems. We supply a range of Fire-Polished Aspheric lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Aspheric lenses are used to correct for spherical aberrations and can be as effective a multi-lens system while taking up less physical space and reducing weight and cost. As such these lenses are often used in military applications, such as night vision goggles or missile guidance systems For more information read PDF …..

Knight Optical offer a range of Stock Sapphire Windows, for use within Infrared Systems. Knight Optical can offer Sapphire (Al2O3) Optics for Infra-red systems over the waveband of 0.2 to 5µm. We offer Sapphire optics for UV, Visible, NIR (0.9 to 1.5µm) and Mid-Waveband Infra-Red (MWIR, 3 to 5µm) Imaging Systems. Sapphire has hardness of about HK2000, which makes it a better choice for windows and outer elements of lens systems. Sapphire has good transmission in the MWIR band, and can be used with optical glass in the NIR, and with Silicon or Germanium in the MWIR, to form well corrected doublets and lens systems. These systems include, for example, Forward Looking Infra-Red (FLIR) systems, and thermography. Al2 O3 has a refractive index of about 1.9288no 1.9174ne at 200nm through to 1.623no 1.615ne in the IR (5µm). This pairing will allow for the design and manufacture of a colour corrected lens that can be used in broad spectrum thermal imaging systems.

Knight Optical offer a range of Stock BK7 Windows, for use within Wind Monitoring LiDAR Systems. These LiDAR systems are used in monitoring wind speeds and wind direction. The data accumulated can be used to generate a Digital Terrain Model or a Digital Elevation Model which are 3D representations of terrain. BK7 is one of the most widely used optical glasses available for use in the range from visible up to the near infrared. Making it ideal as a protective optical window for Wind LiDAR systems which operate at 1500-1560nm. The BK7 can offer an uncoated average transmission of 92% between 300nm and 2000nm. SEE PDF for Full Details

Knight Optical can offer Littrow Prisms for use within Laser Applications. We supply a range of Littrow Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Laser Applications. Littrow Prisms are used near the end of an optical cavity of a laser system to finely adjust the output frequency by changing the AOI of the prism. For more information read PDF …

Diamond turning is an Aspherics best friend! Knight Optical can supply you with a custom made Diamond turned aspheric lenses. Diamond turned aspheric optical lenses are typically used in missile guidance systems, night vision/thermal Imaging cameras and other military based optics and commercial infrared systems (IR). The benefit of Diamond Turned Aspheric optics, are that lens shapes can be manufactured very accurately without an expensive tooling cost except for the diamond bit; and is cost efficient for small quantities. Which are ideal for use within the Defence and Aerospace Industry. Knight Optical offers diamond turned aspherics from a range of infrared materials including Germanium (Ge), Calcium Fluoride (CaF₂), Zinc Sulphide (ZnS), Zinc Selenide (ZnSe), Aluminium (Al) and chalcogenide glasses like AMTIR (Ge33As12Se55 ). For more details read the PDF...

Blower turbo-massage (optional for the ELITE system) Once assembled, this optional introduces a supplementary air debit into the air base lines, supplied by a turbo-blower 1Hp. Activating the blower leads to air enrichment of the air-water jets and implicitly, to an energic, sportive hydro-massage. The optional is a standard endowment in the superior systems of ELITE system. Supplementary multi-LED spot (optional fot ELITE and ELITE TURBO system) The supplementary spot is the same type as the one previously described. The second spot has a syncronized functioning with the first one, increasing the intensity of the light show. The optional has a standard endowment in the superior systems of ELITE TURBO system. Optic fibre STARS20 illumination (optional for ELITE, ELITE TURBO and ELITE TURBO PLUS systems) The colored light provided by a multi-LED EFX22 module, installed in a dispersion body in the optic fibre, is transmitted through optic

Knight Optical offer a range of Stock BK7 Windows, for use within Wind Monitoring LiDAR Systems. These LiDAR systems are used in monitoring wind speeds and wind direction. The data accumulated can be used to generate a Digital Terrain Model or a Digital Elevation Model which are 3D representations of terrain. BK7 is one of the most widely used optical glasses available for use in the range from visible up to the near infrared. Making it ideal as a protective optical window for Wind LiDAR systems which operate at 1500-1560nm. The BK7 can offer an uncoated average transmission of 92% between 300nm and 2000nm. SEE PDF for Full Details

Knight Optical are very experienced within the Thermal Imaging market, including anti-reflective and diamond-like-carbon coatings used on the optical components in these systems. Knight Optical know exactly what you are looking for. Thermal imaging uses infrared materials such as Germanium and Silicon, however in there raw form the transmission is not the best it could be. For example, Germanium typically transmits at <45% but with an AR coating applied, it can improve transmission to >60%. This increase in transmission means that the camera sensor receives a better signal through the protective window. Also with protective windows, we can provide high quality DLC coatings. We ensure the coating is Salt Fog Tested to MIL-SPEC standard to ensure that the coating withstands harsh environments. The coating has high mechanical hardness and high resilience to external stress. Read PDF for more information

You require a special optical design or intensity distribution? We offer customized solutions starting with the individual aspherical lens with an optimized design, through to complete optical systems, tailored to meet the specifications of your application. We always remain true to our own principle: Regardless of whether an individual optic or a complete system is concerned, we will put it through a test cycle which is identical to its subsequent application. Thus, we combine optimum design and replicable, dependable quality, to ensure maximum customer benefit. Product Examples: individual, aspherical optics monolithic lens arrays line focus modules multi-focus spot module ring focus modules rectangular focus modules

INGENERIC OPTICAL SYSTEMS – CUSTOM-FIT! INGENERIC develops and manufactures optical systems and modules, especially designed and optimized for specific customer requirements. A team of experts in the fields of optical, mechanical and electronical design will not only develop the perfect optical design for highest performance. The module will simultaneously be optimized with regard to all other customer specific requirements. Whether this may be a specifically small housing, a maximum permitted weight or specific demands regarding the cooling area – the required specification will be defined in accordance with the demands of the application and then be put into practice. Last but not least, all of our systems benefit from the utilization of INGENERIC’s high quality micro optics, which are well-known all over the world.