Results for
IGUS® GMBH
Germany
Other information Installation video: Instructions for the opening and closing of the E-Tubes Series R117 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the inner radius on both sides Series R118 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the outer radius on both sides Series R157 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the inner radius on both sides Series R158 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the outer radius on both sides Series R167 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the inner radius on both sides Series R168 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the outer radius on both sides iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request Other information Series R117 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the inner radius on both sides Series R118 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the outer radius on both sides Series R157 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the inner radius on both sides Series R158 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the outer radius on both sides Series R167 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the inner radius on both sides Series R168 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the outer radius on both sides Installation video: Instructions for the opening and closing of the E-Tubes E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E2 R100 and E2 R Chip protection, swivelable Excellent protection against chips (even hot chips) Rugged and tight Snap-open alternately along inside or outside - Swivelable or removable lid, short installation time Space-saving through good internal/external dimensions ratio Modular interior separation options Double stop dog system for longer service life and long, unsupported lengths Universal KMA mounting brackets with potential for "all-round" fastening Typical industrial sectors and applications Machine tools Timber Processing Machines General mechanical engineering etc In all areas exposed to dirt and chips iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request
Request for a quotePEMAT S.C.
Poland
Copper solid wire with the addition of manganese and silicon, intended for MIG / MAG (GMAW) welding of non-alloy steels, such as general structural steels, steels for pressure vessels and marine steels, as well as for welding fine-grained carbon-manganese steels for the same purpose , with a minimum yield strength of less than 420 MPa. When welding with OK Autrod 12.51 filler wire, Ar / 20CO2 or pure CO2 can be used as the shielding gas. OK Autrod 12.51 wire in ESAB's unique Octagonal Marathon Pac packaging is perfect for mechanized welding processes. TECHNICAL PARAMETERS Wire diameter: 0.8 mm Roll weight: 5 kg Spool diameter: 200mm Shielding gas used: CO2, Ar / CO2 mixture
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Special cylinders developed and manufactured according to individual customer requirements, specifications or specifications. Both as a completely custom-made special cylinder or modified inexpensively using standard elements with adjustments in form, function, mount, connection or material.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Forged parts made of steel, stainless steel and aluminum including mechanical processing. Pressed brass blanks including mechanical processing, also on rotary transfer machines. Sintered parts made of sintered bronze, sintered porous brass and stainless steel. Filter elements for air, liquids and fuel made of sintered ball material or mesh.
Request for a quoteZEPTER INTERNATIONAL
Switzerland
Our new products are inspired by bag styles that have stood the test of time. Fashion is constantly changing and new bag models are created every season. However, true classic style has irreplaceable value due to its exclusivity and timeless design. Philip Zepter leather bags are pieces that are not subject to the current fashion and season and that you can wear forever. Presentation All products are handcrafted in Italy from natural, genuine cowhide leather (embossed). Cow grain leathers are valued for their resistance to dirt and moisture. The veneering process involves the leather being mechanically processed, dyed and covered with wax. As a result, it gains unparalleled smoothness and shine. Delightful with delicacy, nubuck leather combines the beauty of suede with the durability of grain leather. It is resistant to distortions. Nubuck bags and wallets not only enchant with their appearance, they are also not afraid of the passage of time or intensive use.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
For the simple and safe locking of doors and hatches. Installed from the front without mechanical processing using M6 cylinder-head or cheese-head screws. Secured to prevent removal when locked. The key-operated version is supplied with 2 keys. The key can be removed in both positions (open and closed). The locks are keyed alike, i.e. they can all be opened using the same key (euro key 5333). The double-lug version is supplied with a double lug key. Drawing reference: Actuation: a) single-key system b) square 8 mm c) double lug 5 mm
Request for a quoteMEBA STEEL & INDUSTRIAL SUPPLIES TRADE GMBH
Germany
ASTM 1066 High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-mechanical Controlled Process (A1066 Gr. 50, A 1066 Gr. 60, A 1066 Gr. 65, A 1066 Gr. 70, A 1066 Gr. 80) EN 10208-1 Steel pipes for Combustible Fluids, pipes of Class A (L210GA, L 290 GA, L 360 GA) EN 10208-1 Steel pipes for Combustible Fluids, pipes of Class B (L245NB, L 415NB, L 245MB, L 555MB, L 360 QB, L 555 QB) API Spec. 5 L/ISO 3183 Steels for Line pipes PSL1 Gr.A (L210) – X 70 (L485) API Spec. 5 L/ISO 3183 Steels for Line pipes PSL2 Gr.BN (L245N) – X 60N (L415N) Gr.BQ (L245Q) – X 56Q (L390Q) X60Q(L415Q) – X80 Q (L555Q) Gr. BM (L245M) – X80M (555M) X90M (L 625M), X100M (L690M)
Request for a quoteGEORG H. LUH GMBH
Germany
GraphTHERM® - graphite optimised for heat conductivity. GraphTHERM® developed by Georg H. Luh GmbH especially for improved heat conductivity enable a thermal conductivity of 20 W/mK or more thanks to their special form. The mechanical properties or processability are not impaired even at a high filling degree of more than 60%. This combination of characteristics makes GraphTHERM® especially well suited for plastics applications. GraphCOND® - graphite optimised for electrical conductivity Special pre-treatment and grinding results in graphite particles that enable an effective electrically conductive network to be created even at a low material proportion. A conductivity of >100 S/cm is possible in plastic. GraphCOND® features convincing properties and is versatile in application, for example in dissipative coatings or highly conductive compounds.
Request for a quoteETHICA FASHION STORE
United Kingdom
Product Description Ponytail Style: Hair Band Whether To Import: No Brand: Dingya (Beauty) Brand Type: Domestic Brand Model: C45 For People: Miss Processing Technology: Mechanism Can It Be Dyed: Do Not Scald Hair Material: High Temperature Wire Applicable Nude: Any Nude Origin: Henan Article Number: C45 Color: 45Cm Main Downstream Platforms: Ebay, Amazon, Wish, Aliexpress, Independent Station, LAZADA Main Sales Areas: Africa, Europe, South America, Southeast Asia, North America, Northeast Asia, Middle East Has Licensable Private Label: Yes Whether Cross-Border Export Of Special Supply Sources: Yes Color Classification: Blue+ D.Brown, Blue+ Black, Rose+ D.Brown, Purple+ D.Brown, Blue+ Lt.Brown, Burgundy+ D.Brown, Burgundy+ Lt.Brown, Purple+ Black
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
The hot rolled steel circle is produced at Ukrainian factories, it is an excellent material for the manufacture of a wide range of products produced by the mechanical method on lathes and cutting machines, metal structures , supports, and other products. The steel circle is in demand in mechanical engineering, manufacturing, construction. It is used for making bushings, cylinders, locks, guides, rods, grids, dumbbells, swings, horizontal bars, lattices, washers, linings, pins and other cylindrical products, seamless pipe . Hot rolled steel circle GOST 2590 88, its standard dimensions length from 4 to 6.3 m, thickness from 10 mm to 330 mm. One of the varieties of round products is a calibrated circle produced by the method of cold drawing, grinding, polishing the surface of the product, and the compliance of surface dimensions to microns, which does not require further mechanical processing. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.
Request for a quoteSTALEVAR COMPANY LLC
United Kingdom
Rolled aluminum is in demand and is applicable in production, construction and in everyday life, chemical laboratories, medical institutions. An important quality of aluminum is its weight and resistance to aggressive environments. Aluminum, if used correctly, will be an excellent durable material; it is processed mechanically on special equipment. The following types of rolled metal products are made C652from it aluminum sheet GOST 21631 (corrugated), corner, channel, Tavr, I beam, circle, pipe, wire, as well as from aluminum alloys produce various foundry products for production and household needs. Aluminum section metal products are produced by hot rolled (hot rolled) and cold rolled (cold rolled) methods, general and technical. application. Aluminum alloys Primary aluminum index A, with a max aluminum content of 99.5%; Aluminum technical AD with a high content of Fe and Ci from it are made aluminum sheets smooth, corrugated, pipes, packages, corner;
Request for a quoteDE SMET ENGINEERS & CONTRACTORS
Belgium
Cane sugar is produced by means of technologies rather similar to those used in a beet sugar plant that are also fully mastered by DSEC. Sugar cane is however a totally different plant compared to sugar beet: whereas sugar beet is sowed and can be harvested after +/- 6 months, cane takes longer to grow but grows back after it has been cut and can therefore be harvested several consecutive years (4 to 6) before being replanted. Cane can be cut either manually or mechanically before being directly processed in the mill. Cane plantation location in relation of the plant is of paramount importance so as to reduce sugar losses by the degradation of the plant after cutting as well as to minimize logistic costs. DSEC will select the most appropriate methodology for extracting the juice from the cane after its first shredding. The extraction operation will be performed using mill tandem or cane diffusion while additional mills will press the residual solid (bagasse) in order to increase its fiber content while additional mills will press the residual solid (bagasse) in order to increase its fiber content. Pressed bagasse will be used as fuel for the plant combined heat and power generation that will generally export electricity on the public grid. The choice between mill tandem and diffuser will be highly dependent on plant capacity, cane characteristics, expected extraction performances and plant general concept.
Request for a quoteNUTRA INGREDIENTS LTD
United Kingdom
Hulled hemp seeds(or shelled hemp seeds) are harvested/produced in the EU. The seeds are de-hulled by mechanical crushing and sieving process. We can offer conventional and organic hulled hemp seeds in bulk, packaged in 20 kilo bags Private label options are also available. Please contact trevor@nutraingredients.co.uk for further information.
Request for a quoteMETALLSTANDART LTD
Russia
It is used in mechanical processing of metals and non-metallic structural materials in mechanical engineering (turning, milling, planing, chiseling and drilling). Hard alloys and composite materials based on tungsten carbide are widely used In the mining industry, as well as mixtures of tungsten carbide, titanium carbide, tantalum carbide (TT grade for particularly severe processing conditions, e.g. chiselling and planing of forgings made of heat-resistant steels, or impact drilling of heavy-duty materials). We buy scrap of the following categories: Tungsten 4, Tungsten 5, Tungsten 6
Request for a quoteResults for
Mechanical processing - Import exportNumber of results
15 ProductsCountries
Company type