Wet painting - Import export

Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with water curtain, the air is sucked through the water curtain by exhaust fans while the unused wet paint is held by water. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.

Powder and Wet paint equipment must be determined and selected carefully according to the properties of the parts to be painted. In our systems, we use the highest quality, most efficient and most reliable, manual and automatic powder and wet paint guns, single and multi-axis robots.

Max. product dimensions W=4500mm L=8000mm H=3400mm. Sandblasting is also available for stainless steel, which is separated from other steel to prevent contamination. Upon customer request, we also employ laser removal of impurities on the surface. Customers can choose from different sandblasting roughnesses depending on project needs.

Lackieranlagen aus dem Hause Rippert sind vielseitige Alleskönner. Autoteile, Möbelstücke oder Kunststoffzubehör können damit präzise lackiert werden und Sie haben darüber hinaus die Möglichkeit manuelle Elemente wie Spritztische oder -wände sowie automatisierte Komponenten zu kombinieren. Natürlich können wir Lackierabläufe mit Hilfe modernster Robotik für Sie auch vollautomatisiert ablaufen lassen. Bei Rippert entwickeln und planen wir Lackieranlagen gemeinsam mit Ihnen, um alle Voraussetzungen für die optimale Oberflächenbehandlung Ihrer Produkte zu schaffen. Vom Werkstück für PKW über einzelne Bestandteile von Möbeln bis zur Oberflächenbehandlung von ganzen Kunststoffplatten zur späteren Weiterverarbeitung ist alles möglich. Unsere Anlagen stehen für modernste Technik und höchste Effizienz! Eine Lackieranlage muss heute vielen Anforderungen genügen. Sicherlich muss diese Komponente im Anlagenbau in erster Linie dafür sorgen, dass Lacke gleichmäßig auf die Werkstücke aufgetragen werden. In Zeiten des steigenden Kostendrucks müssen Lackieranlagen darüber hinaus immer kostensparender arbeiten. Wir planen und montieren deshalb Anlagen, die höchst effizient mit einem Maximum an Leistung für ein Minimum an Kosten für Sie arbeiten, ohne dass dabei Qualitätseinbußen entstehen. Darüber hinaus ist der Umweltschutz ein wichtiger Faktor. Durch aufwändige Filtertechniken und Abscheidefunktionen erfüllen unsere Anlagen selbst strengste Umweltschutzauflagen.

Partial or complete evaporation of the volatile portions of paints before the film formation is completed and/or before a further coating can be applied. In wet painting, the majority of the solvents are already released and exhausted during the coating procedure. In order to dry the freshly applied paint layer, it is necessary to also remove and exhaust the remaining solvents as far as possible. This takes place in special flash-off zones by means of exhaust air and conditioned supply air or fresh air. Flash-off zones are usually the link between paint application and drying. A certain degree of preliminary drying often also takes place here by working with a slightly raised room temperature. Some processes also require a gentle transition to higher temperatures in the dryer. All this can be realised in flash-off zones. On top of that, flash-off zones offer particular protection of the freshly painted surfaces against outside influences, especially dust.

Büyük ekipman ve araçlar için ideal ölçülerde boya kabini gerekir. Bazı farklı özelliklerde gerekli olabilir. Tavanın açılması Aynı anda hem boya kabini hem Flash of hemde Kurutma yapabilme özelliği gibi gereklilikler ve değişkenler bulunur. Boyanacak ürünün özelliklerine göre Neye ihtiyacınız var. bunu belirleyebiliriz.

The company possess with two lines for powder coating, in which can be manufacture products with maximum dimensions 1000x2000x600 mm. We also make a wet painting.

We offer MIG-MAG and WIG welding with maximum power of electricity 400 A. Our welding machines are KEMPPI and MILLER. We make welding of steel details, tube constructions with length till 6 meters and weight till 3 tones. We also offer spot welding and robotic welding (Fanuc) at details with length till 3 meters and width till 1.5 meters, by one or by two sides. We weld ferrous metals, stainless steel and aluminum. After welding we make cleaning of welding and painting (powder and wet).

The main part of the wet painting lines that we have produced is wet painting booths. Wet painting booths are used to apply wet paint on the material under the most ideal conditions after the surface cleaning process and to prevent the paint that can not hold onto the work piece from being escaped to the environment. The wet paint is atomized by high pressure air and applied on the part that is going to be painted. It is preferred because it is easy to apply and gives good results. As Rota Makine, we design lines with conveyor and robots to offer our esteemed customers who want to make production with high capacity, automation and untouched. Our wet painting booths are categorized as With Water Curtain and With Solid Filter because of their different advantages. Wet enameling cabinets for enamel applications are also available in our scope of production.

Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with solid filter, the air is sucked through the filters by exhaust fans while the unused wet paint is held by paper or fiber filters. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.

Our Infrared ovens can be produced as conveyor belt tunnel or internal return (U) type. Our ovens have andirect heating system with radiation heat transfer. They are used due to the cure flat shaped parts after wet or powder coating paint applications. They are preferred because they can cure the paint three times faster than the convectional type ovens. They can be produced with natural gas or lamp type infrareds. The inner surfaces of our ovens’ panels are produced with a galvanizedor stainless steel sheets and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thicknesses determined and rock wool or glass wool is used for insulation.

The paint plant is especially preferred in the construction and furniture industry. The materials used in this sector are painted both for aesthetic purposes and for protection purposes. Paint plants is a far-reaching term. There are varieties. Its quality and form vary. In general, the age paint plant is more preferable. There is a wet paint booth, conveyor system and drying oven in the paint plant. It is produced in accordance with the most suitable conditions and made suitable for use.

Filters made at our factory in Nantes (France) Standard Filtr’Overspray is well adapted to filtration of paint overspray in spray booths. It is easy to manipulate and to stock. Its lifetime, 6 times longer than other filtering medias on the market, allows to make important costs reductions. This filter is perfectly adapted to filtration of any wet overspray particles (paints, varnishes, gel coat, glue, silicone, polyester etc…) Advantages of this filter : - Lifetime up to 6 times longer than other filtering medias on the market - Easy installation and manipulation - Environment friendly materials according to ISO 14000 - Adapted to filtration of solvent paints and water based paints This filter can be used in all spray booth with horizontal and vertical airflow.

Part size 400*400*500mm laser cutting, flame cutting the sheets and then welding,finally wet painting

We are specialised in varnishing transparent plastics, which are being painted from behind to achieve a profound depth effect. In our specially customised painting booth the plastics are being sprayed with wet paint creating various structures and degrees of gloss. Here we have the possibility to process large-sized parts. KIRSCH Kunststofftechnik has decided to process even the most demanding parts in-house. High expertise and skillful handling with plastics is significant to accomplish our customers` requirements. Highest cleanness standards are our guideline.

At given need our experts can invoke extensive subcontracting. Constructions can be: shot blasted and painted wet; galvanized in various ways;

HODA, UAB can wet paint the plastic parts to give you and your final customer the best look of your product.

HODA, UAB produces plastic products for the electrical industry. Our company provides that services: mould tool manufacturing, plastic injection moulding, insert overmoulding, DC (dual- component) injection moulding, gas assisted injection moulding, thermoset moulding, plastic blow moulding, decoration, tampo printing, screen printing, wet painting, assembly and packaging, local and international delivery.

At the moment HODA, UAB operates 54 injection moulding machines, which gives us flexibility to produce different size and purpose plastic parts from a fraction of gram up to six kilograms of mass. HODA, UAB services: Mould tool manufacturing, Plastic injection moulding, Insert overmoulding, DC (dual- component) injection moulding, Gas assisted injection moulding, Thermoset moulding, Plastic blow moulding, Decoration, Tampo printing, Screen printing, Wet painting, Assembly and packaging, Local and international delivery.

Industrial processes place high demands on the type of labels used for identification. These include processes such as painting, powder coating, wet painting, soldering, chemical pre-treatment, KTL painting processes, autoclave processes (sterilisation) and printed circuit board (PCB) production. During these processes, barcode labels are often exposed to extremely high temperatures or aggressive industrial cleaning agents, which a simple paper label cannot withstand. ONE2ID has a wide range of heat-resistant materials that can be used up to very high temperatures.

Labelling parts and products that undergo industrial processes, such as chemical pre-treatment or cleaning, powder coating, anodising and wet painting, is challenging, but not impossible. This requires a special type of label that not only has a strong adhesive, but also protects the information on the label. Our specialists have designed a label that can be applied prior to coating or chemical cleaning processes and remains securely in place during the treatment: the Paintmask label. A laminate attached to the Paintmask label protects the product information on the label. After the paint has cured or the cleaning or pre-treatment has been completed, you can simply remove the laminate and reveal the information on the label unaffected and ready to be scanned.