Water technology - Import export

Due to their special design, 100 % free passage and low flow resistance, STRATE AWASTOP non-return valves are ideal for: Sewage technology, media with solids and coarse solids, sludge (up to 5 % TM) Fresh and service water technology, including in areas where high pressure losses make powerful pumps necessary On request: pumping of fluids deviating from the media listed Areas where quiet operation is particularly important Non-return valves are recognised all over the world as for universal applications in the pumping of fresh water, effluent, sludge and air. Stand for high operational safety Stand out thanks to their excellent value-for-money and low maintenance requirements 100 % free passage Low flow resistance Quiet operation thanks to the inclined valve seat which shortens the closing distance Minimum clogging tendency through optimum hydraulic design− Fail-safe closing of the valve since the closing element is fixed securely into the valve cover

Weight-optimized borehole probe with demountable carbon fiber rod and integrated filter technology. (Dust and water filter) Extremely light, yet very rugged construction for fatigue-free work. The borehole probe has a sight glass, dust filter and water filter integrated in the lower part. The dmountable borehole probe CFRP is available in a carrying case complete set with borehole probe CFRP, bell probe CFRP and weight-optimized foldable carpet probe CFRP made of carbon fiber.

Constructed according to your application Constructions from 2 ways up to 14 ways All ports are noninteracting and every one comes with its own leakage connection. This makes external surveillance of each port possible Media: air, water, oil, fat, emulsions Sensor technology optional

Manual cleaning with ultrahigh pressure water jetting technology often places high demands on the staff. Working overhead, in a stooped position, with respiratory protection or in heavy protective suits these and many other requirements can have a negative impact on work efficiency and safety. The WOMA Jetty now makes cleaning work with highpressure water more comfortable, more efficient and safer. This is made possible by a manipulator that is as manoeuvrable as it is robust and can be controlled via remote control. This means a consistently high quality of work even for hardtoreach work areas. Four extendable legs allow an enlarged footprint for outstanding stability in any environment. Depending on the task to be performed, different water tools can be used with the WOMA Jetty.

In addition to its standard models, ASCO offers a large number of modern and easy to maintain CO2 vaporisers. In accordance to your requirements, we provide you with a suitable model. In order to meet every customer's need, we have different types, technologies and capacity ranges from 100 to well over 2000 kg/h. ASCO offers following technologies Cold water circulation Electric water bath heater Gas heated water bath Electric Atmospheric Individual solutions Costoptimised applications Reliable operation Minimal maintenance Customised adaptations to local conditions Expert knowhow Outstanding customer service

KAMAT's own filter technology is innovative and fast-growing. Why are we involved in filter technology? The answer is simple: high pressure cleaning technology using water as an environmentally friendly medium requires a high quality filter and recycling solution. In some cases, traditional filter manufacturers are unable to meet these requirements, which is why KAMAT also offers its own customer-specific solutions in the field of filter technology. High-pressure water cleaning technology has many advantages: A water jet can be used gently on the surfaces to be cleaned, water is generally available as a medium and at the same time is environmentally friendly without extensive delivery costs. When it comes to accessories, high pressure cleaning systems have special requirements that are difficult to meet. For this reason, KAMAT has developed its own customised high-pressure filter solutions. KAMAT high pressure filters are available for operating pressures up to 4,000 bar.

Proven, patented method of fluid reclamation, extend the life of soluble oils, coolants, and washwater. The PRAB Oil/Water Separator uses a proven and patented method for gravity separation of oil from water to less than 15 ppm. This fluid reclamation separator is designed to meet and exceed all performance requirements of U.S. Coast Guard 46CFR162.050 and IMO Resolution A393 (X) of effluent discharge of 15 ppm free and mechanically dispersed oil in water. PRAB Oil/Water Separator filtration technology uses a double packed, fixed, porous media bed for accelerated fluid reclamation allowing the unit to be compact and lightweight. The system consists of the oil/water separator, supply pump with motor and a floating oil skimmer. Optional items include electrical controls, level switches, lid with vent, clean water discharge pump oil holding tank, oil discharge pump, and other customer specified controls and alarms.

Reverse Osmosis filtration effectively removes dissolved salts, colloidal and suspended matter. Reverse Osmosis filtration removes up to 99.5% of dissolved salts and virtually all colloidal and suspended matter from the most challenging waste and feed water applications. This technology is typically used for industrial, metalworking, and surface treatment applications as a final process after ultrafiltration or chemical treatment of incoming water, process water, or industrial wastewater. PRAB offers Reverse Osmosis (RO) systems for incoming water, process water and industrial wastewater treatment ranging in capacity from 1 gpm (1440 gpd) to 200 gpm (288,000 gpd). This process which removes up to 99.5% of dissolved salts and virtually all colloidal and suspended matter from the most challenging waste and feed water applications.

Two independent firing units and flue gas paths create a double control range for individual heat consumption. — Very high efficiency across all power ranges — Particularly suitable for highly fluctuating heat and process heat demand — Reliable solutions for heating plants and the manufacturing industry with temperature levels up to 225 °C — Heat supply for the future: Low-NOx or CO2-neutral operation possible — Complete system with intelligent control technology and protected remote connection — Proven and durable boiler technology Made in Germany

The UT-H is suitable for processes in high temperature and pressure ranges. The boiler can also convert to climate-neutral fuels which makes it a future-proof solution. — High-pressure hot water boiler from 820 to 18,300 kW with very high efficiency levels — Versatile operation for the manufacturing industry and district heating grids with temperature levels up to 225 °C — Customer-specific design and future-proof technology — User-specific control which offers integration of other control systems and remote monitoring — Custom designs for heat recovery boilers — Proven and reliable construction Made in Germany

The various output sizes and temperature ranges up to 190 °C of the UT-M enable flexible operation for countless process heat and heating applications. — Efficient heat and process heat for low running costs and emissions — Compact design for easy positioning and quick heating — Flexible use for industrial, commercial and district heating applications with temperatures up to 190 °C — Project-specific control solutions and optional real-time monitoring — Complete system from a single source, low-emission or CO2-neutral customer-specific operation possible — Proven and maintenance-friendly construction for a long service life and reliability — Fuel: Oil, gas, multi-fuel firing, Biogas, bio-oil, hydrogen, special fuels

Using the latest spray technology water is sprayed into ice moulds at subzero temperatures, building up layer upon layer of dense, crystalline ice. The machine cabinet is constructed using catering grade stainless steel for strength and hygiene, while the insulated storage bin is constructed using non-toxic antibacterial plastic for improved insulation and hygiene.

/ Process Agitators Standard Agitators On the field of mixing technology MPT cooperates with Milton Roy Mixing Co. Milton Roy Mixing is the leading French agitator manufacturer based in Samoreau near Paris. More than 70 % of the agitators produced there are sold outside the EU. Milton Roy Mixing was founded in 2003 as a division of Milton Roy Europe after the takeover of the agitator manufacturer Robin. For covering all agitator-related requirements two product ranges are manufactured and offered.  For conventional applications in water technology the HELISEM standard agitators are available as stated in the table below. Typical applications are: Mixing liquids, Producing different suspensions, Homogenizing substances in neutralizing plants, Producing lime suspensions, Dissolving solid matters, Homogenizing polyelectrolyte solutions, Flash mixing in coagulation plants, Flocculation processes.  Depending on the application and the container volume, the suitable agitator model

Measurement and control In this sector, MPT represents the interests and products of WALCHEM Corporation in Holliston, Massachusetts (USA). WALCHEM is a leading manufacturer of sensor technology and controllers for the surface technology and for the water treatment technology, including pH-, redox and conductivity controllers as well as special controllers for the cooling-water and boiler water conditioning. Besides the measuring transducer, these controllers include also a control program, adapted to the respective application. Monitoring, alarming – control and telecontrol systems By default, WALCHEM’s WebMaster has available sensors and data amplifiers for various physical parameters. Using the integrated program the parameters can be linked to each other and to control parameters. Via telephone modem and Ethernet board the user is provided with information such as alarm messages and off-limit conditions worldwide.  Measuring and control technology for dosing liquid media in

The ITT Cannon CA-COM and CA-COM-B series connectors are enhancements of the legendary CA series for specific market needs. They were developed particularly for industrial application and impress with their superior contact technology. These are water-proof connectors that are completely sealed and insensitive to condensation, vibration and contamination. The connectors of both CA- series can be replaced with the corresponding types according to MIL-C-5015 or VG95234, as mounting dimensions and layouts are the same. RoHS compliant

Standard advantages: RTS-Rotation – low-maintenance dry spray booth Overspray dry separation demonstrates its strengths in practice above all when relatively large quantities of paint have to be processed and the overspray portion cannot be reduced any further. Spray booth with dry separation are usually equipped with disposable filters or manually regenerative filters. These cause costs for spare filters, maintenance and disposal. In addition to that, operation has to be interrupted in order to exchange the filters. The ‘RTS rotation’ system was developed by Rippert in order to reduce these costs and tooling times. Maintenance intervals and filter service lives are prolonged significantly in comparison with conventional systems due to the new brush pre-filtration. How the ‘RTS-Rotation’ system works Overspray separation in the RTS-Rotation system takes place by means of a pre-filter and a fine filter stage. The pre-filter stage is formed by vertical, slowly rotating brush rollers. The bristles present a very large total surface area and absorb the adhesive particles from the overspray. During the slow rotation, the paint particles can dry on the tips of the bristles. This results in slowly growing cakings on the bristles. Scrapers are mounted in the area behind the brush rollers that continuously remove these cakings from the bristles. The dislodged, hardened material falls into the drawers arranged under the brushes and can thus be simply disposed of. The dry paint dust may often be disposed of as ‘commercial waste’. The brushes otherwise require little maintenance and do not need to be exchanged or renewed. The fine filter stage is formed by a special fleece filter, which is arranged above the brush rollers and must be manually maintained or exchanged in the standard version. The maintenance intervals depend on the paint material used. Automatic cleaning or an external fine filter with automatic cleaning is also possible as an option. Over 10 years of operational experience shows that around 75 to 95% of the overspray is separated out by the pre-filter stage and the rest by the fine filter stage. The degree of separation depends strongly on the type of paint and the drying reactivity during the flying phase. Use of the RTS-Rotation with the following paints Before practical use, the paints are tested and approved in Rippert’s own pilot plant. Stove enamels and 100% UV paint systems cannot be used. The horizontal version Furthermore, it is possible to use the system as a horizontal underfloor extraction system. This version is used, for example, by a machine manufacturer for large parts. In addition, a drag conveyor with gulley extraction is used there in order to automatically transport the particles cleaned off the brushes out of the pit. Conclusion The RTS-Rotation system is particularly useful when relatively large quantities of paint with an unavoidable overspray portion have to be processed, as otherwise a great deal of residual waste would result using conventional technology. Compared to water-sprinkled spray walls and normal dry spray booths the amortisation period is shorter; it is frequently less than two years.

Since the 1980’s, we have been a leading producer of superfine powders for Metal Injection Molding (MIM). Our expertise and advanced atomization technology enable us to produce very fine MIM powders down to 10µm. Products and Sizes Our MIM water atomization technology is compatible with most conventional high-performance stainless steels and alloys. Special size distributions are available as well as some standard sizes. Grades: 17-4PH®, 70/30 Fe/Cr, 430L, 316L, other 300 Stainless Steel series Sizes: Typically smaller than 20µm Austenitic Stainless Steels 316L used in MIM applications which require good corrosion resistance, strength and ductility. Also available 304L and 310L. Ferritic Stainless Steels 430L ferritic stainless steel combines good magnetic response and some corrosion resistance. Also available 409L, 410L, and 434L.

Achieving the highest quality polyester and nylon fibers requires selection of the right fiber filter media. We offer many filtration powder options for melt spun polymers. Typical Melt Spun Polymers and Corresponding AMETEK Filtration Product Polyamide / Nylon – AMETEK DP-1 Product Line Polyethylene Terephthalate (PET) / Polyester – AMETEK 316L or DP-1 Product Line Polypropylene – AMETEK 316L or DP-1 Product Line Custom Hot Polymer Filtration materials are offered for the most demanding applications Precision Powders Provide Numerous Advantages Compared to Metallic Fibers, Sand, or Glass Outstanding continuity of spin operation Premium fiber quality through superior filtration Excellent volume performance due to robustness of metal powder Correct porosity and tortuosity in filtration media for maximum hot polymer shear enabled by our advanced water atomization technology No chemical reaction with polymer, eliminating any discoloration of the fiber

Our metallurgists specialize in the design, development and production of specialty metal powders manufactured through advanced high-pressure water atomization technology. We work alongside our customers to develop custom metal alloy powder solutions to exacting specifications for critical applications. Our expertise and nearly 50 years of history in water atomization of specialty metal powder products has led us to supply a huge number of market sectors ranging from automotive to semiconductor to aerospace across the test globe. Water Atomization Process We employ an advanced high-pressure water atomization process to engineer highly customized metal powder. Our technology is proven to achieve fine particle size distributions, enabling our metallurgists to produce precision metal powder products.

Robotic rotary bell atomizer with external charge electrodes & multi-trigger technology for water-based materials Description PPH 707 EXT external charge sprayer is dedicated to the application of waterborne materials. The performances of atomitzer and components are the same as the PPH 707 SB (dedicated to solvent paints); it is the benchmark in automotive finishing with external charge thanks to its Hi-TE technology. This version of the PPH 707 EXT features Multi-Trigger technology, which integrates a color change block in the body of the atomizer. This color change block allows for 1 super-high runner and 5 high runners, saving paint on color changes. High finish quality High transfer efficiency Easy integration Performance High rotating speed High voltage unit Hi-TE dual shaping air Dual circuit for fast color change Productivity Extremely low contamination by Dual Pin technology Large range of bell cups Lightweight for any painting robot Remote bell monitoring...

Microfiber Cleaning Technology: Durable, Superior Water Absorbency, Non Abrasive, Lint Free, Larger Surface Area, Environment Friendly Usage – Wet & Dry both Flat shape & 360° Movement Extendable Handle Cleans – Liquid, Oil, Dust, Hair & Bacteria Multipurpose Use Easy to Wash & Change Refill Safe on All Surfaces

The ITT Cannon CA-COM and CA-COM-B series connectors are enhancements of the legendary CA series for specific market needs. They were developed particularly for industrial application and impress with their superior contact technology. These are water-proof connectors that are completely sealed and insensitive to condensation, vibration and contamination. The connectors of both CA- series can be replaced with the corresponding types according to MIL-C-5015 or VG95234, as mounting dimensions and layouts are the same. RoHS compliant

Microfiber Cleaning Technology: Durable, Superior Water Absorbency, Non Abrasive, Lint Free, Larger Surface Area, Environment Friendly Usage – Wet & Dry both Flat shape & 360° Movement Extendable Handle Cleans – Liquid, Oil, Dust, Hair & Bacteria Multipurpose Use Easy to Wash & Change Refill Safe on All Surfaces

Fragranced micellar emollient: while it degreases from road dirt and insects, its provides the car with water-repellent protection. Its “micellar” technology enriched with polymers: Delicately removes traffic film dirt and grease without damaging aluminium and rubber. The product creates a thick and full-bodied lather suited to foam systems. Repair and self-drying effect. Has an amazing water-repellent effect when rinsing, thus reducing drying time of the car and facilitating the following phases. Makes the car much shinier and smoothens out the micro scratches on the surface. Minimises residues on the bodywork caused by hard water, thus reducing the onset on droplets. Has balanced foam properties so that it does not block the purification systems. No added NTA/EDTA/PHOSPHORUS/SODIUM HYDROXIDE*. It contains surfactants of plant origin.

Carbon Staple fiber with special Graphite Impregnation and silicon free Run In lubricant Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High Cross section density due to special impregnation Excellent Value for money Graphitized all-round packing with Emergency run Capabilities Good wear resistance against abrasive and crystallizing products Recommended shaft surface hardness: HRC 45 Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.15 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Valves Mixer Kneader Agitators Suitable for Chemical industry Pulp and paper industry Waste water technology Community facilities Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes...

Combination Braid of ePTFE with incorporated Graphite and Para-Aramid Fiber Corner Reinforcement with Special Blocking compound Practical useful application data: max. temperature: +200 °C Characteristics Reinforced packing with reduced wear through improvedheat conductivity Recommended shaft surface hardness: HRC 50 Safe universal packing for abrasive media Extrusion resistant, ideal for worn equipment with bigger gap width Development: Better sealability of stuffing box Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 3 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Waste water technology Chemical industry Variant Square shape S12K Plunger with ParaAramid-Corner...

Para-Aramid Fiber Packing with PTFE Impregnation and Run-In Lubricant­ Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High cross section density through PTFE blocking agent, which protects against penetration of crystallizing media Excellent value for money Good resistance against wear, with abrasive and hardening mediums Recommended shaft surface hardness: HRC 50 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.20 g/cm³ Practical useful application data: max. temperature: +200 °C Haupteinsatzgebiet Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Power plant technology Waste water technology Mining industry Variant Square shape P7 Form of delivery This packing can be manufactured in...

Hybrid braid in W-Profile made of heat conductive ePTFE Yarn with Meta-Aramid fiber reinforcement and Run-In lubricant Characteristics Clean packing with ultimate heat conductivity for abrasive products in pumps and other rotating equipment. Recommended shaft surface hardness: HRC 35 Porosity filling coating increases density and protects the packing in crystallizing mediums. W-Profile Reinforcement reduces shaft wear Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.55 g/cm³ Main application Centrifugal pumps Mixer Agitators Kneader Filter Suitable for Pulp and paper industry Chemical industry Power plant technology Waste water technology Applications with abrasive products and when white packing is required Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special...