Water technology - Import export

Due to their special design, 100 % free passage and low flow resistance, STRATE AWASTOP non-return valves are ideal for: Sewage technology, media with solids and coarse solids, sludge (up to 5 % TM) Fresh and service water technology, including in areas where high pressure losses make powerful pumps necessary On request: pumping of fluids deviating from the media listed Areas where quiet operation is particularly important Non-return valves are recognised all over the world as for universal applications in the pumping of fresh water, effluent, sludge and air. Stand for high operational safety Stand out thanks to their excellent value-for-money and low maintenance requirements 100 % free passage Low flow resistance Quiet operation thanks to the inclined valve seat which shortens the closing distance Minimum clogging tendency through optimum hydraulic design− Fail-safe closing of the valve since the closing element is fixed securely into the valve cover

Weight-optimized borehole probe with demountable carbon fiber rod and integrated filter technology. (Dust and water filter) Extremely light, yet very rugged construction for fatigue-free work. The borehole probe has a sight glass, dust filter and water filter integrated in the lower part. The dmountable borehole probe CFRP is available in a carrying case complete set with borehole probe CFRP, bell probe CFRP and weight-optimized foldable carpet probe CFRP made of carbon fiber.

Constructed according to your application Constructions from 2 ways up to 14 ways All ports are noninteracting and every one comes with its own leakage connection. This makes external surveillance of each port possible Media: air, water, oil, fat, emulsions Sensor technology optional

Manual cleaning with ultrahigh pressure water jetting technology often places high demands on the staff. Working overhead, in a stooped position, with respiratory protection or in heavy protective suits these and many other requirements can have a negative impact on work efficiency and safety. The WOMA Jetty now makes cleaning work with highpressure water more comfortable, more efficient and safer. This is made possible by a manipulator that is as manoeuvrable as it is robust and can be controlled via remote control. This means a consistently high quality of work even for hardtoreach work areas. Four extendable legs allow an enlarged footprint for outstanding stability in any environment. Depending on the task to be performed, different water tools can be used with the WOMA Jetty.

KAMAT's own filter technology is innovative and fast-growing. Why are we involved in filter technology? The answer is simple: high pressure cleaning technology using water as an environmentally friendly medium requires a high quality filter and recycling solution. In some cases, traditional filter manufacturers are unable to meet these requirements, which is why KAMAT also offers its own customer-specific solutions in the field of filter technology. High-pressure water cleaning technology has many advantages: A water jet can be used gently on the surfaces to be cleaned, water is generally available as a medium and at the same time is environmentally friendly without extensive delivery costs. When it comes to accessories, high pressure cleaning systems have special requirements that are difficult to meet. For this reason, KAMAT has developed its own customised high-pressure filter solutions. KAMAT high pressure filters are available for operating pressures up to 4,000 bar.

Two independent firing units and flue gas paths create a double control range for individual heat consumption. — Very high efficiency across all power ranges — Particularly suitable for highly fluctuating heat and process heat demand — Reliable solutions for heating plants and the manufacturing industry with temperature levels up to 225 °C — Heat supply for the future: Low-NOx or CO2-neutral operation possible — Complete system with intelligent control technology and protected remote connection — Proven and durable boiler technology Made in Germany

The UT-H is suitable for processes in high temperature and pressure ranges. The boiler can also convert to climate-neutral fuels which makes it a future-proof solution. — High-pressure hot water boiler from 820 to 18,300 kW with very high efficiency levels — Versatile operation for the manufacturing industry and district heating grids with temperature levels up to 225 °C — Customer-specific design and future-proof technology — User-specific control which offers integration of other control systems and remote monitoring — Custom designs for heat recovery boilers — Proven and reliable construction Made in Germany

The various output sizes and temperature ranges up to 190 °C of the UT-M enable flexible operation for countless process heat and heating applications. — Efficient heat and process heat for low running costs and emissions — Compact design for easy positioning and quick heating — Flexible use for industrial, commercial and district heating applications with temperatures up to 190 °C — Project-specific control solutions and optional real-time monitoring — Complete system from a single source, low-emission or CO2-neutral customer-specific operation possible — Proven and maintenance-friendly construction for a long service life and reliability — Fuel: Oil, gas, multi-fuel firing, Biogas, bio-oil, hydrogen, special fuels

/ Process Agitators Standard Agitators On the field of mixing technology MPT cooperates with Milton Roy Mixing Co. Milton Roy Mixing is the leading French agitator manufacturer based in Samoreau near Paris. More than 70 % of the agitators produced there are sold outside the EU. Milton Roy Mixing was founded in 2003 as a division of Milton Roy Europe after the takeover of the agitator manufacturer Robin. For covering all agitator-related requirements two product ranges are manufactured and offered.  For conventional applications in water technology the HELISEM standard agitators are available as stated in the table below. Typical applications are: Mixing liquids, Producing different suspensions, Homogenizing substances in neutralizing plants, Producing lime suspensions, Dissolving solid matters, Homogenizing polyelectrolyte solutions, Flash mixing in coagulation plants, Flocculation processes.  Depending on the application and the container volume, the suitable agitator model

Measurement and control In this sector, MPT represents the interests and products of WALCHEM Corporation in Holliston, Massachusetts (USA). WALCHEM is a leading manufacturer of sensor technology and controllers for the surface technology and for the water treatment technology, including pH-, redox and conductivity controllers as well as special controllers for the cooling-water and boiler water conditioning. Besides the measuring transducer, these controllers include also a control program, adapted to the respective application. Monitoring, alarming – control and telecontrol systems By default, WALCHEM’s WebMaster has available sensors and data amplifiers for various physical parameters. Using the integrated program the parameters can be linked to each other and to control parameters. Via telephone modem and Ethernet board the user is provided with information such as alarm messages and off-limit conditions worldwide.  Measuring and control technology for dosing liquid media in

Standard advantages: RTS-Rotation – low-maintenance dry spray booth Overspray dry separation demonstrates its strengths in practice above all when relatively large quantities of paint have to be processed and the overspray portion cannot be reduced any further. Spray booth with dry separation are usually equipped with disposable filters or manually regenerative filters. These cause costs for spare filters, maintenance and disposal. In addition to that, operation has to be interrupted in order to exchange the filters. The ‘RTS rotation’ system was developed by Rippert in order to reduce these costs and tooling times. Maintenance intervals and filter service lives are prolonged significantly in comparison with conventional systems due to the new brush pre-filtration. How the ‘RTS-Rotation’ system works Overspray separation in the RTS-Rotation system takes place by means of a pre-filter and a fine filter stage. The pre-filter stage is formed by vertical, slowly rotating brush rollers. The bristles present a very large total surface area and absorb the adhesive particles from the overspray. During the slow rotation, the paint particles can dry on the tips of the bristles. This results in slowly growing cakings on the bristles. Scrapers are mounted in the area behind the brush rollers that continuously remove these cakings from the bristles. The dislodged, hardened material falls into the drawers arranged under the brushes and can thus be simply disposed of. The dry paint dust may often be disposed of as ‘commercial waste’. The brushes otherwise require little maintenance and do not need to be exchanged or renewed. The fine filter stage is formed by a special fleece filter, which is arranged above the brush rollers and must be manually maintained or exchanged in the standard version. The maintenance intervals depend on the paint material used. Automatic cleaning or an external fine filter with automatic cleaning is also possible as an option. Over 10 years of operational experience shows that around 75 to 95% of the overspray is separated out by the pre-filter stage and the rest by the fine filter stage. The degree of separation depends strongly on the type of paint and the drying reactivity during the flying phase. Use of the RTS-Rotation with the following paints Before practical use, the paints are tested and approved in Rippert’s own pilot plant. Stove enamels and 100% UV paint systems cannot be used. The horizontal version Furthermore, it is possible to use the system as a horizontal underfloor extraction system. This version is used, for example, by a machine manufacturer for large parts. In addition, a drag conveyor with gulley extraction is used there in order to automatically transport the particles cleaned off the brushes out of the pit. Conclusion The RTS-Rotation system is particularly useful when relatively large quantities of paint with an unavoidable overspray portion have to be processed, as otherwise a great deal of residual waste would result using conventional technology. Compared to water-sprinkled spray walls and normal dry spray booths the amortisation period is shorter; it is frequently less than two years.

The ITT Cannon CA-COM and CA-COM-B series connectors are enhancements of the legendary CA series for specific market needs. They were developed particularly for industrial application and impress with their superior contact technology. These are water-proof connectors that are completely sealed and insensitive to condensation, vibration and contamination. The connectors of both CA- series can be replaced with the corresponding types according to MIL-C-5015 or VG95234, as mounting dimensions and layouts are the same. RoHS compliant

The ITT Cannon CA-COM and CA-COM-B series connectors are enhancements of the legendary CA series for specific market needs. They were developed particularly for industrial application and impress with their superior contact technology. These are water-proof connectors that are completely sealed and insensitive to condensation, vibration and contamination. The connectors of both CA- series can be replaced with the corresponding types according to MIL-C-5015 or VG95234, as mounting dimensions and layouts are the same. RoHS compliant

Para-Aramid Fiber Packing with PTFE Impregnation and Run-In Lubricant­ Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High cross section density through PTFE blocking agent, which protects against penetration of crystallizing media Excellent value for money Good resistance against wear, with abrasive and hardening mediums Recommended shaft surface hardness: HRC 50 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.20 g/cm³ Practical useful application data: max. temperature: +200 °C Haupteinsatzgebiet Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Power plant technology Waste water technology Mining industry Variant Square shape P7 Form of delivery This packing can be manufactured in...

Carbon Staple fiber with special Graphite Impregnation and silicon free Run In lubricant Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High Cross section density due to special impregnation Excellent Value for money Graphitized all-round packing with Emergency run Capabilities Good wear resistance against abrasive and crystallizing products Recommended shaft surface hardness: HRC 45 Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.15 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Valves Mixer Kneader Agitators Suitable for Chemical industry Pulp and paper industry Waste water technology Community facilities Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes...

Combination Braid of ePTFE with incorporated Graphite and Para-Aramid Fiber Corner Reinforcement with Special Blocking compound Practical useful application data: max. temperature: +200 °C Characteristics Reinforced packing with reduced wear through improvedheat conductivity Recommended shaft surface hardness: HRC 50 Safe universal packing for abrasive media Extrusion resistant, ideal for worn equipment with bigger gap width Development: Better sealability of stuffing box Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 3 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Waste water technology Chemical industry Variant Square shape S12K Plunger with ParaAramid-Corner...

Hybrid-Braid in W-Profile made of ePTFE/Graphite and Graphite yarn with Run-In Lubricant Characteristics Universal packing for sealing abrasive mediums in all manner of plant rotating equipment Low Coefficient of friction and ultimate heat conductivity High plant standardization possibilities Recommended Shaft Surface Hardness HRC35 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 25 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.55 g/cm³ Main application Centrifugal pumps Mixers Kneaders Agitators Refiners Autoclave Filters Suitable for Bauxit Industry General Mining Ash Slurrries in Power plants Pulp and paper industry Chemical industry Waste water technology Universal use Form of delivery This packing can be manufactured from 6 to 40 mm square as well as in intermediate, inch sizes and special measurements. 06 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5...

Combination Braid of ePTFE with Incorporated Graphite and Para-Aramid Fiber Surface reinforcement with Run-In Lubricant Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Even and reduced shaft surface wear Excellent heat conductivity Recommended shaft surface hardness: HRC 45 Safe and universal packing with abrasive media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Kneader Agitators Filter Refiner Suitable for Chemical industry Pulp and paper industry Waste water technology Variant S12K Plunger with Para-Aramid Cornerreinforcement, available 6 mm and above Form of delivery This packing can be manufactured from...

100 % Para-Aramid continuous Fiber with PTFE-Blocking Agent and Silicone free dynamic Run-In Lubricant Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Excellent in highly abrasive products Wear resistent universal packing Minimized monitoring, short run-in period Shafts or shaft sleeves in HRC 60 recommended Operating range Pressure [p max]: 25 bar, Velocity [v max]: 25 m/s Pressure [p max]: 500 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 250 bar Temperature: t = -50… +280 °C pH: 2 - 12 Density: 1.25 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Kneader Agitators Autoclave Refiner Suitable for All industries Chemical industry Waste water technology Pulp and paper industry Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special...

Para-Aramid Fiber Packing with PTFE Impregnation and Run-In Lubricant Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High cross section density through PTFE blocking agent, safety against penetration of crystallizing media Offers excellent value for the money Good protection against wear, with abrasive and hardening media Recommended shaft surface hardness: HRC 50 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.20 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Power plant technology Waste water technology Mining industry Variant Trapez shape TP7 P7A without lubricant for valves, armatures, gate valves S7G...

Meta-Aramid Fiber with PTFE Blocking Agent and Run-In Lubricant Characteristics Wear resistant, universal packing for applications with abrasive content High cross section density and structural stability, yet elastic and pliable Low friction, low shaft wear (HRC 45 shaft shaft surface hardness is sufficient) Clean packing, no contamination of media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.40 g/cm³ Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Waste water technology Form of delivery This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements. Available from 4 to 9 mm in square X-Section. 04 - 09 mm on 1kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on...

Braid of ePTFE yarn with Incorporated Graphite and Run-In Lubricant Characteristics Excellent heat conductivity Maximum protection of shaft against wear (HRC 25 is sufficient) Extended MTBF Easy and safe installation and handling No ageing process Operating range Pressure [p max]: 25 bar, Velocity [v max]: 25 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.50 g/cm³ Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Vacuum pumps Suitable for Universal use Waste water technology Acids Alkaline solutions Oil and grease Form of delivery This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements. Available from 4 to 9 mm in square X-Section as Style P1P. 04 - 09 mm on 1kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on...

Carbonized synthetic fiber with PTFE impregnation and run in lubricant Practical useful application data: max. temperature: +140 °C Characteristics Good flexibility Rot proof Form stable packing Good value for the money Recommended surface hardness HRC50 Operating range Pressure [p max]: 15 bar, Velocity [v max]: 15 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +200 °C pH: 3 - 12 Density: 1.30 g/cm³ Practical useful application data: max. temperature: +140 °C Main application Centrifugal pumps Mixer Kneader Agitators Refiner Autoclave Gate valves Filter Suitable for Pulp and paper industry Sugar industry Waste water technology General maintenance Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg...

Synthetic Fiber Packing with PTFE Impregnation and Run-In Lubricant Characteristics Elastic and pliable Recommended shaft surface hardness: HRC 50 Resistance against rotting Structural stability Cost effective Operating range Pressure [p max]: 15 bar, Velocity [v max]: 12 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Temperature: t = -50… +140 °C pH: 3 - 12 Density: 1.30 g/cm³ Main application Centrifugal pumps Mixer Kneader Agitators Refiner Autoclave Gate valves Filter Suitable for Pulp and paper industry Sugar industry Waste water technology Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 4 48.1 5 [3/16"] 30.8 6 21.4 6.4 [1/4"] 19.1 8...

A clear matter: disposing of process water in an operationally safe manner After vibratory finishing, the process water contains solids and pollutants such as metals, oils and greases. To prevent these from entering the sewage system during disposal, you can clean your process water - even acidic or alkaline water - in our flocculation plants. You can then discharge the clear water into the sewage system in accordance with legal regulations. DO/GA flocculation units The PLC-controlled DO and GA flocculation plants are fully automatic solutions that purify up to 2,000 litres of process water per hour. If your daily water volume to be treated exceeds 3,000 litres, these plants are the right choice for purifying your process water. RT flocculation unit The easy-to-operate and inexpensive RT unit is suitable for you if you want to purify a daily water volume of up to 3,000 litres.

We offer a wide range of efficient, reliable water management systems for Wastewater management Rainwater management We design, manufacture, and install mechanical and electrical equipment for water management systems. Our clients include organisations, local authorities and industrial companies in Benelux and Germany. We develop comprehensive water management technology and systems, which make technically, economically and ecologically optimised solutions possible along the entire value chain.