Wall smoothing - Import export

TECHNICAL DEFINITION Ready mixed filler for interior and exterior finishing work on walls and ceilings OSCAR is a water based filler giving a finish identical to oil based products. COMPOSITION AND APPEARANCE Resin emulsion containing calcium carbonate, rheological agent and various additives. The resulting paste is white. ACCEPTED SUBSTRATES Interior walls and ceilings • Plasterboard • Old paint • Plaster blocks • Primers Outside walls • Smooth concrete • Fine floated cement SUITABLE SURFACES • Wallpaper • Paint • Wall coverings • Thick plastic covering (RPE) TECHNICAL CHARACTERISTICS • Paste density : 1.9 • Particle size : very fine • pH : 7 APPLICATION Application is manual using a float or a painter’s knife. The maximum thickness will be 1 mm per coat. Smooth and sand if necessary before OSCAR has entirely set. Clean tools with water.

TECHNICAL DEFINITION Ready-to-use, solvent-free adhesive primer for smooth or hardly porous substrates, for interior and exterior use. BETON HAFTGRUND allows to achieve an adhesive bridge between such substrates and certain cementor plaster-based products with a relatively low bond. COMPOSITION AND APPEARANCE Pink, ready-to-use primer with visible grain. Paintlike consistency. ACCEPTED SUBSTRATES Can be applied onto interior and exterior walls, and also onto ceilings. • Smooth cast-in-place concrete • Self-levelling concrete • Old paintwork • Old painted fibreglass coverings APPLICATION BETON HAFTGRUND is to be applied using a brush or a woollen roller. Apply a liberal coat onto the substrate and allow to dry before covering. The drying time will depend on the substrate and ambient conditions. As a general rule, allow for approximately 6 hours.

TECHNICAL DEFINITION Cement-based powder filler with fibres for treating damaged exterior substrates. The filler is multi-purpose: can be used to fill, repair and rectify wall surfaces, with a smooth finish. SUITABLE SUBSTRATES All types of substrates : cement, concrete, concrete blocks, stones, brick, old paintwork, old tiling. COVERINGS Once the filler is completely dry, can be covered with all types of coatings and paintwork. Do not directly cover with solvent-borne paint. TECHNICAL FEATURES • Setting time: 30 to 40 minutes • Adhesion: complies with EN 16566 • AFNOR NFT 36.005 classification: Family IV class 4c MIXING PROPORTIONS • 6 to 6.5 litres of water per 15 kg bag • 2 to 2.2 litres of water per 5 kg bag • 0.4 - 0.43l of water for 1 kg • 2 volumes of water for 5 volumes of powder APPLICATION Application with a plastering spatula, knife, smoothing trowel. Clean tools with water. COVERAGE Approximately 1 kg per m²/mm of thickness.

TECHNICAL DEFINITION Ready-to-use surface filler paste for filling interior holes and cracks. COMPOSITION AND APPEARANCE Water, calcium carbonate, sand, resin and various additives. SUITABLE SUBSTRATES All types of interior substrates : concrete, cellular concrete, cement, breeze block, brick, plasterboard, plaster tiles, plaster, old paint. COVERING Primer coat, smooth surface filler, wall coverings, paint REFERENCE DOCUMENTS • Filler meets EN 16566 standard • DTU 59.1 : Paint work TECHNICAL CHARACTERISTICS • Density : 1.5 • Dry extract : 82 % STORAGE 9 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. APPLICATION Applied by hand using a filling knife or spatula. The thickness is 2 cm; to fill deeper holes, build up the filler in several steps The maximum thickness will be 1 cm per coat.

Photo : The inside of silos DOHOGNE SYSTEM have a completely smooth wall what allows the complete emptying for all bulk products. Modular, extendable silos, adapted to industrial storage capacities for all bulk products and allowing for complete emptying and refilling with another product without requiring any intermediate cleaning. DOHOGNE SYSTEM silos are constructed from curved panels with external bolts, are self-cleaning, can be dismantled and are interchangeable. Their thickness varies from 2 to 4 mm, and standard dimensions are 940 x 1940 mm. Robust, sealed silos resulting from over 50 years’ experience, complying with European standard EN 1991-4 and with all specific static and dynamic storage criteria.

The smooth internal walls of the LIPP digesters (largely without any internal attachments) ensure gentle, uniform mixing while keeping energy consumption low. If an external heating system is fitted, it will guarantee uniform temperature distribution in the digester. These mechanical and thermodynamic benefits with LIPP digesters mean short retention times. The high functional safety, for heating and stirring technology, ensures a low demand for process energy and this is combined with the benefits of minimal maintenance requirements and a long service life.

Thanks to the Double Seam System, LIPP digesters have smooth internal walls (largely without any internal attachments) and ensure uniform mixing while keeping energy consumption low. The external panel heating guarantees uniform temperature distribution in the digester. These thermodynamic and mechanical benefits with LIPP digesters also mean that short retention times are achieved. The high functional safety, especially in respect of heating and stirring technology, promotes a low demand for process energy. Further benefits include minimal maintenance requirements and a long service life.

The central agitator has a low energy requirement to ensure mixing and ensures optimum biological digestion. This is helped by the smooth internal walls (largely without any internal attachments) which prevent substrate deposits. As an option, an external heating system can be added to the digester, ensuring an even temperature distribution thanks to the good heat transfer properties of the steel. The central agitator has a low energy requirement to ensure mixing and ensures optimum biological digestion. This is helped by the smooth internal walls (largely without any internal attachments) which prevent substrate deposits. As an option, an external heating system can be added to the digester, ensuring an even temperature distribution thanks to the good heat transfer properties of the steel. MAXIMUM LEAK TIGHTNESS AND PRACTICAL ON SITE CONSTRUCTION With Lipp digesters you will benefit from over 50 years experience in plant and tank construction.

The range of material grades available and individually customisable pumping and stirring technologies provide optimum boundary conditions for any substrate composition. Pre or post treatment of the substrate can be carried out by installing additional tanks (e.g. hydrolysis, sugar beet silos and post digesters). With Lipp tanks for biogas plants which are built and used all over the world, you will benefit from 50 years of experience in plant and tank construction. They are constructed using VERINOX stainless steel which is characterised by maximum leak tightness and high quality. Stainless steel digester with a digester chamber volume of 100 to 10,000 m3 Wide range of tank roofs With or without optional gas accumulator Flexible stirring technology which can be adapted to the digester and substrate Smooth internal walls and uniform temperature distribution

Our spring-loaded base trolley ensures no unnecessary strain is put on the back. The constant loading and unloading height allows loads to be removed or stacked ergonomically. The items are also less likely to suffer accidental damage as they are loaded and removed. The Gmöhling spring-loaded base trolley allows non-tiring, rapid and efficient work and guards against straining the back due to incorrect posture, leading to back and spine problems. The spring tension can also be quite simply and easily adjusted to meet your needs. The Gmöhling spring-loaded base trolley is an indispensable addition in hospital and laundry logistics, old people's homes, libraries, the automotive industry, etc. as well as in intralogistics. Aluminium container trolley with smooth and anodised surface robust profiles on top and bottom rim protect the trolley and its surroundings smooth side walls reduce the friction of the load and enable the spring-loaded bottom to react immediately to changes in...

Plastic containers 300/600/700 PLUS in an approved version for the transport and storage of exhausted batteries in compliance with ADR regulations. They can be stored outdoors and can be stacked and forklifted with a pallet truck and forklift. Overlapping is possible via 4 pins printed directly on the upper part of the boxes which fit into the special holes on the bottom of the feet of the overlying container. Easy to clean thanks to the smooth internal walls, they do not absorb odors and humidity. The boxes are equipped with two crossbars on the long side and resist deformation thanks to their structural rigidity. All models are equipped with an identification label showing the types of storable batteries. Standard color gray RAL 7001 The battery boxes are supplied without a lid (sold separately as an option) On models for batteries it is not possible to apply the hole with the screw cap or the tap.

TILTING BUCKET IN POLYETHYLENE FP-BE 1000 WITH CAPACITY 1000 LT. Tipping container made of sturdy polyethylene and forkable steel base with forklift truck, it allows the transport and unloading of scraps and scrap operating in safe conditions. The bucket is secured to the forks of the forklift truck by means of the supplied chain and to carry out the overturning it is sufficient to operate the release lever directly from the driver's seat of the forklift truck (by means of a rope) and therefore to operate in maximum safety. The tipping container is complete with polyurethane wheels with brake and gas shock absorbers to control the tipping speed Features - Rotational molded monobloc container (robust, handy and light) - Double wall with cavity, smooth interior and rounded edges - Reinforced base with ribs - Forked structure built with galvanized steel - N° 2 gas shock absorbers and end-of-stroke device for progressive tipping - N° 2 fixed wheels and 2 swivel wheels with brake

The automated assembly technology in the LIPP Double Seam System enables the fast construction of stainless steel tanks, which in turn has a positive effect on investment costs. The benefit for you flexible construction technology with efficient production on site requiring minimal installation space and ensuring a short installation time. The smooth internal walls of the LIPP Digesters (largely without any internal attachments) ensure gentle, uniform mixing while keeping energy consumption low. The external heating system guarantees uniform temperature distribution in the digester. These mechanical and thermodynamic benefits with LIPP digesters mean short retention times.

Our spring-loaded base trolley ensures no unnecessary strain is put on the back. The constant loading and unloading height allows loads to be removed or stacked ergonomically. The items are also less likely to suffer accidental damage as they are loaded and removed. The Gmöhling spring-loaded base trolley allows non-tiring, rapid and efficient work and guards against straining the back due to incorrect posture, leading to back and spine problems. The spring tension can also be quite simply and easily adjusted to meet your needs. The Gmöhling spring-loaded base trolley is an indispensable addition in hospital and laundry logistics, old people's homes, libraries, the automotive industry, etc. as well as in intralogistics. Aluminium container trolley with smooth surface robust profiles on top and bottom rim protect the trolley and its surroundings smooth side walls reduce the friction of the load and enable the spring-loaded bottom to react immediately to changes in weight elastic,...

The sample containers sterile are sterilised by irradiation and correspond to a sterility assurance level Sterile SAL 10-3 (according to ISO 11137) inside. The handy and universally applicable sample jar is easy to fill, smooth-walled and free of undercuts, therefore it can be emptied completely. It is an excellent universal container for all liquid and solid contents. The attached lid of the sample container can be opened with one hand and fixed at a 90° angle. This leaves the other hand free to take samples. Liquid/condensate in the lid runs into a collecting channel integrated in the lid, nothing is lost, nothing can drip off. The sample boxes are closed while hot during production. Due to this process, the sample boxes close absolutely tightly, as the lid and box adapt optimally during the cooling process. The sample container made of PP is highly transparent, the contents of the container can be easily recognised.

GUARANTEED OPTIMUM STORAGE FOR A WIDE VARIETY OF MATERIALS The storage of bulk materials needs to be not only cost effective but also safe, and systems should be easy to integrate in production processes. LIPP Double Seam technology and welded LIPP tanks have proven to be particularly suitable for bulk storage applications in industry and agriculture. LIPP silos provide a high level of stability and total leak tightness and protect bulk materials from moisture. The smooth internal walls of the silos are a benefit that pays dividends when storing special media. All kinds of bulk materials Grain Soya Silage fodder Woodchips Pellets Clinker brick Cement SILOS FOR STORING GRAIN AND OTHER FOODSTUFFS Grain, soya and other foodstuffs are precious commodities and a major asset in agriculture and they need to be stored particularly carefully. With the tried and tested Lipp Double Seam System, Lipp silos offer major benefits in terms of design and leak tightness.

A similar version of MCCA1549. This smooth surface aluminum mascara tube circular is manufactured with an oxidized aluminum cover. Instead of having a ribbed surface, a smooth glazed wall is produced. The smooth surface aluminum mascara tube is made in a circular and slim shape. A brush is installed. More customized decorations are optional.

The CB3 High pallet box is particularly robust and, with a height of 1,140 mm and around 1,000 litres capacity, presents the perfect solution for the efficient transporting of particularly large quantitis or bulky goods. Its single-mould manufacturing with three runners or nine feet ensures a robust runner or foot connection. Additional ribs above the entry openings offer increased protection against forklift tines while the strong ribbing of the lower deck results in a very robust container bottom. Integrated stacking cams on the outside corners lock with the stacking pockets in the bottom, ensuring stacked boxes are firmly secured. Characteristics: Walls closed High stability of container bottom due to strong ripping Smooth interior walls for easy emptying and cleaning The container is based on DIN EN 13626 and DIN EN ISO 12048. Options: Lateral trunnions Drain port RFID Lid

The CB3 pallet box from Craemer is a highly robust large load carrier and perfect for transporting bulky goods. It is injection moulded in one piece with three runners. Maximum impact protection and resistance to forklift tines is ensured through additional ribs over the entry openings. The seamless construction and smooth interior walls of this large load carrier ensure easy emptying, simple cleaning and good drying capabilities. Integrated stacking cams on the outer corners give stacked pallet boxes a secure hold. Dimensions L x W x H: 1200 x 1000 x 740 mm Weight: 36,5 kg Volume: 610 L Material: PE Load capacity: Stacking Load 5000 kg, Holding Capacity 700 kg, Dynamic Load 1200 kg Runners: 3, unwelded Integrated locking corners for secure stacking Stippled area for adhesive labels Ram protection Smooth interior walls Container corresponds to DIN EN 13626 and DIN EN ISO 12048 Option: — RFID transponder — Lid — Individual printing — Available in various colours

The CB1 pallet box from Craemer is one-piece injection moulded with three runners, making it highly robust. Further impact protection and resistance to forklift tines is provided by additional ribs over the entry openings of the closed exterior walls. The seamless construction and smooth interior walls of this large load carrier ensure easy emptying, simple cleaning and good drying capabilities. Integrated stacking cams on the outer corners give stacked pallet boxes a secure hold. Dimensions L x W x H: 1200 x 800 x 740 mm Weight: 34,5 kg Volume: 470 L Material: PE Load capacity: Stacking Load 5000 kg, Holding Capacity 700 kg, Dynamic Load 1200 kg Runners: 3, unwelded Integrated locking corners for secure stacking Stippled area for adhesive labels Ram protection through added side reinforcements Smooth interior walls Container corresponds to DIN EN 13626 and DIN EN ISO 12048 Option: — RFID transponder — Lid — Individual printing — Available in various colours

- available as of September! - FDA approved materials are essential as a basic for your floor squeegee for areas that require the highest level of hygiene such as in food industry, professional kitchens, hospitals, labs and pharmaceutical industry... The new Hygienic Monoblade Squeegee of Moerman is a one-piece strong and durable floor squeegee that works excellent on smooth surfaces - as well floor and walls, made of FDA-approved materials. The effective double splash guard makes it possible to handle this with a push or pull movement. optimal socket handle design protected soft touch edges ideal for smooth surfaces autoclavable 138°C one piece squeegee: no hidden bacteria high tear and wear resistance use for floor, as well for walls smooth waterflow and minimal splash strong and durable body and handle socket effective double splash guard for push and pull application Logistic information Available in 5 colors. Sizes: 300 - 400 - 500 - 600 mm / 12" - 16" - 20" - 24" A handy grip

Cementing clout with high penetrating and insulating resin based on resinous latex in aqueous dispersion for external and internal, particularly suitable for the consolidation of insubstantial surfaces, To improve the adhesion of background plasters or mineral coatings or other mortars on new or old walls, on smooth or poorly absorbent surfaces, not uniform in absorption, concretes, weak, inconsistent or flour supports, on supports Base Chalk and Anhydrorene, on autoclavable cellular concrete blocks. Suitable for the consolidation of cementitious screets of low consistency. Packaging: Tanica 5-20 LT Color: Colourless Usage: Indoor/outdoor Dilution: 1:2 with clean water on concrete supports and on supports generally non-absorbent and/or particularly smooth and/or difficult to adhere • 1:4/1:5 with clean water on supports generally absorbent or on average Absorbent Yield: 8/12 sqm for LT, depending on the absorption of the support

Cone Bottom Conical Tanks for Complete Drain Applications Cone Bottom Conical Tanks provide the ultimate solution for applications that require a complete drain. These help for the efficient processing of some liquids and can save money and time when compared to a flat bottom storage tank. Other applications for these conical cone bottom tanks include a settlement tank or sludge tank. A Unique Full Drain Solution Conical tanks are unique in that their contents discharge completely through a cone point at the centre of their base. Their cone base and smooth internal walls ensure complete discharge. This has clear advantages for food production, fermented beers, mixing tank, manufacturing and farming applications. Enduramaxx cone bottom tanks provide a unique solution with choices of a 5, 15, 30, 45 and 60-degree cone. This cone angle ensures maximum performance, with even the most viscous liquids not building up inside the tank.

The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. Wire bushing, also known as insulating bushing, is a new type of composite pipe with insulating materials. It is made of resin matrix and other reinforced materials. It is used to wear wires and protect wires, so it is called wire bushing. The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. It is easier and more convenient to move and transport than metal steel pipe and cement pipe. The construction and installation are simple and convenient, which saves both trouble and labor. Strong corrosion resistance, insulation, non-magnetic, acid and alkali resistance, flame retardant, antistatic.

The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. Wire bushing, also known as insulating bushing, is a new type of composite pipe with insulating materials. It is made of resin matrix and other reinforced materials. It is used to wear wires and protect wires, so it is called wire bushing. The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. It is easier and more convenient to move and transport than metal steel pipe and cement pipe. The construction and installation are simple and convenient, which saves both trouble and labor. Strong corrosion resistance, insulation, non-magnetic, acid and alkali resistance, flame retardant, antistatic.

The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. Wire bushing, also known as insulating bushing, is a new type of composite pipe with insulating materials. It is made of resin matrix and other reinforced materials. It is used to wear wires and protect wires, so it is called wire bushing. The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. It is easier and more convenient to move and transport than metal steel pipe and cement pipe. The construction and installation are simple and convenient, which saves both trouble and labor. Strong corrosion resistance, insulation, non-magnetic, acid and alkali resistance, flame retardant, antistatic.

The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. Wire bushing, also known as insulating bushing, is a new type of composite pipe with insulating materials. It is made of resin matrix and other reinforced materials. It is used to wear wires and protect wires, so it is called wire bushing. The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. It is easier and more convenient to move and transport than metal steel pipe and cement pipe. The construction and installation are simple and convenient, which saves both trouble and labor. Strong corrosion resistance, insulation, non-magnetic, acid and alkali resistance, flame retardant, antistatic.

The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. Wire bushing, also known as insulating bushing, is a new type of composite pipe with insulating materials. It is made of resin matrix and other reinforced materials. It is used to wear wires and protect wires, so it is called wire bushing. The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. It is easier and more convenient to move and transport than metal steel pipe and cement pipe. The construction and installation are simple and convenient, which saves both trouble and labor. Strong corrosion resistance, insulation, non-magnetic, acid and alkali resistance, flame retardant, antistatic.

Sliding door set for wall mounting Smooth running of the sliding door