Stainless steel - Import export

Health and safety is of paramount importance to all industries. Our introduction of edge rounding and dressing eliminates the sharp edge, known as a burr that occurs during the production of steel strip and coil. Our updated edge dressing machines are capable of producing both large and small quantities of stainless steel strip and coil with a kinder safer rounded edge or full round edge. We can edge dress on site to a maximum width of 150mm. Certificates of conformity, showing the exact chemical composition of the material are supplied with each delivery. We provide: Bevelled Edge - Used for spiral wound gasket production, with 90º angles. Sak - Fully Rounded Edge - Many clients require material to have a fully rounded edge (SAK). GK - Slit edge Standard material with a maximum burr 5% of the material thickness. WAK - Flat rolled edge - Many clients require material to have a deburred edge (WAK).

Stainless Band’s in-house slitting line offers the capability for slitting up to 1250mm wide coil x 0.20 - 1.50mm thickness in 304/316L/321 and 430/409. Other grades are available on request. Also offering material as PE or PVC coated/with foil. Coil sizes range from 200kgs to 3500kgs depending on final widths. This unique line means Stainless Band can handle coils up to 8.5 tonnes on-site made from stainless steel AISI 304/316. This will reduce pricing and also improve delivery times to clients for wide coil and also standard products that Stainless Band provide. They offer good formability, corrosion resistance, toughness and good mechanical properties. As a result they are widely used for insulation and engineering applications. These grades are non-magnetic in the annealed condition. The density of our wide coil is 8.03kg/cm3-0.29 Ibs/in3. The modus of elasticity is 200 Gpa.

At Stainless Band we have the capacity to polish material in coil form or blanks in various grades including AISI 304-S15- 1.4301 EN 10088-2/ASTM A240. We can offer the following finishes from 120 to 320 Grit as well as standard 2B or BA finished. Material can be made into blanks with lengths from 100mm to 3000mm long. Standard thicknesses 0.10ms from m - 4.00. and widths from 2.50mm to 1500mm maximum. Our standard tolerance is EN ISO 9445:2006 but others are available. We can provide coating films, PE and PVC surface protection. Finishes can range from smooth and slightly reflective through course, medium, fine and bright and reflective.

Stainless Band has in house rolling facilities to produce temper rolled strip in various hardness or tensile to suit client requirements. Stainless Band Ltd has in-house rolling facilities to flatten and produce temper rolled stainless steel strip to suit client requirements. These are available in various hardness or tensiles to reduce cross camber or “D” Section. For higher tensile over 1000n/mm2 (330vpn) we can supply precision mill material. Our production capacity for stainless band temper rolled strip is 0.10mm up to 2.0mm with a hardness range of 0.1mm up to 2.0mm with VPN ranges TR 230, TR 280, TR330, TR380 and TR430 and tensile ranges of 800+ 1000+ 1200+ 1500+ and 1900+ n/mm2. Stock grades are 430, 301, 304 and 316. Our production capacity for stainless band flattening provides a gauge range: 1.00mm up to 3.0mm, with a width range: from 10mm to 110mm, stock grades: 430, 301, 304 and 316.

At Stainless Band we pride ourselves on supplying a wide range of steel strapping and boxed banding for delivery to the USA/Canada. Standard materials 0.015“ and 0.020“ thickness, other sizes can be produced to suit order requirements. Grade 304 and 316. Full Round Edges (100% safe edges). We can provide, boxed banding, oscillated banding, pancake coil and aluminium box banding as well as wing seals/closed seals in stainless steel and aluminium.

Stainless Band work with high technology industries. Our slitting and shearing services are available at 0.10mm - 3mm thickness and from 2.50mm wide. We can cut to length from 100mm long to 4000mm long. We provide a comprehensive temper rolling and edge dressing service including deburring round edge and straightening. We have in-house bobbin winding facilities on plastic bobbins or large wooden spools and can apply protective coatings to product if required. As will all Stainless Band products in-house testing takes place and material test certificates are supplied with every delivery. You are in safe hands with Stainless Band.

Stainless Band has in house rolling facilities to produce temper rolled strip in various hardness or tensile to suit client requirements. Stainless Band Ltd has in-house rolling facilities to flatten and produce temper rolled stainless steel strip to suit client requirements. These are available in various hardness or tensiles to reduce cross camber or “D” Section. For higher tensile over 1000n/mm2 (330vpn) we can supply precision mill material. Our production capacity for stainless band temper rolled strip is 0.10mm up to 2.0mm with a hardness range of 0.1mm up to 2.0mm with VPN ranges TR 230, TR 280, TR330, TR380 and TR430 and tensile ranges of 800+ 1000+ 1200+ 1500+ and 1900+ n/mm2. Stock grades are 430, 301, 304 and 316. Our production capacity for stainless band flattening provides a gauge range: 1.00mm up to 3.0mm, with a width range: from 10mm to 110mm, stock grades: 430, 301, 304 and 316

ASMS659 is a heat and corrosion resistant steel. We hold this grade in round bar form. The material is typically used for parts requiring good corrosion resistance which will be subjected to elevated temperatures during fabrication and service. The material is particularly good for parts requiring oxidation resistance up to 816oC. Material is supplied in the solution heat treated condition.

Alloy 17-4 PH is a chromium-copper precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. 17-4PH Stainless Steel combines high strength, hardness (up to 572°F / 300°C), and moderate corrosion resistance. Alloy 17-4 PH withstands corrosive attacks better than any of the standard hardenable stainless steels and is comparable to Alloy 304 in most media. The alloy is subject to crevice or pitting attack if exposed to stagnant seawater for any length of time, although it is corrosion resistant in some chemical, petroleum, paper, dairy and food processing industries(equivalent to 304L grade). Mechanical properties can be improved (high strength and superior corrosion resistance) when precipitation hardened from Condition A to one of the Condition H tempers. We supply 17-4 PH in the H1150D condition. This is double aged at a temperature between 1140° F and 1160° F for 3.75 hours to 4.

Base material for cold drawing is ASTM A276. UNS S32760 F55 solution annealed material that complies with Condition A. After cold drawing (strain hardening) material meets ASTM A276, UNS 32760 F55 Condition S. Material that meets required impact test requirements will be further designated as variant 'FG', 'FLT', or 'FLT+'

ASMS659 is a corrosion resistant steel. We hold this grade in round bar form in both the solution treated condition (Condition A) and in the H1025 precipitation treated (aged) condition. The material is typically used for part s requiring corrosion resistance and high strength up to 300oC. The material exhibits good ductility and strength in the transverse direction in large section sizes SIZES STOCKED: Condition A – 9.5 mm dia – 152.4 mm dia H1025 condition – 12.7 mm dia – 152.4 mm dia

13-8 Mo VIM-VAR steel is a precipitation hardening martensitic stainless steel/ It offers excellent strength, fracture toughness and transverse mechanical properties. The material is resistant to stress, corrosion cracking and has the high strength characteristics common to the family of precipitation hardening steels. The alloy is double vacuum remelted (VIM-VAR) which assures low gas content, improved homogeneity and superior cleanliness

Customers who use narrow width strip can increase productivity with oscillated wound coils as large as 1000kgs. The benefit of this larger wound coil is that the coil needs to be changed less frequently and therefore reduces downtime. Common uses for oscillated wound is the building industry and automotive sector, this process has been proven to increase machine output by 40% on pressing lines. Our oscillating wound is available in thicknesses 0.40-3.00mm with a width to 3.00-80mm. With a coil weight of 100kgs or coil OD 1,000,00mm and pack width optional 200/350mm. Our stainless steel oscillating wound is WAK edge dressed on wooden spools. The inside diameter is 406, 508 flash butt welding method with reannealing. The welding method is 90 degree TIG-skew tolling, seam smoothened. Marking is in accordance to client specification.

Our aluminium boxed banding is available from stock in widths from 12.70mm (1/2”) to 25.00mm (1”) wide and thickness 0.30mm (0.012”) to 0.50mm (0.020”) Standard grade 1050 HH other grades are available at request. Coils can be supplied as standard 2kg rolls or as boxed banding with safe edges. Supplied on wooden pallets and shrink-wrapped. Maximum pallet weight 1500kg. A full export service is available for worldwide supply. Aluminium wing seals in 12.70mm (1/2”), 19.05mm (3/4”) and 25.00mm (1”) sizes are also available, and are compatible with aluminium or stainless steel banding. Certificates of conformity, showing the exact chemical composition of the material are supplied with each delivery.

Stainless steel Glass clamps suitable for various ranges of glass thickness. Can be attached to flat or curved surfaces. Satin Finish as standard, but can be mirror finished

Stainless steel end post to carry 10.0mm glass panels. Can be supplied in indoor, outdoor and coastal grade. Standard posts are 1100mm high but can be made to any height and suit any glass thickness. Satin finish as standard but can be mirror polished

Hauhinco is the world market leader in the design and manufacture of water hydraulics and has a similar work ethic to Apex, with its quality driven manufacturing facility in Sprockhovel, Germany. Like Apex, Hauhinco designs products on the basis of reliability and longevity of service. It supports equipment throughout its maximum lifespan without simply rendering good equipment obsolete.

Our custom-built fabrication shop is 34.5m by 24.0m with an under hook height of 14.0m – enabling us to manufacture stainless steel vessels from as small as 2 litres right up to 180,000 litres. We mainly use grade 316 stainless steel, however we can also manufacture vessels in stainless steels (304, 316 and 321 grades) and in other materials on request.