Results for
KGA ENCLOSURES LTD
United Kingdom
Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Also suited for vertical or horizontal mounting of printed circuit boards (using optional P.C. card guides). • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Stocked in black with matte textured finish.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Desktop electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Designed to meet IP54. • Two sets of vertical 1.5mm (0.062") P.C. board guides are moulded into case halves front and rear. • Integral horizontal P.C. card mounts on Eurocard centers. • P.C. card standoffs moulded into top and bottom half of enclosure - require #6 x 1/4" (6.4mm) screws - part number 1598ATS100.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Ideally suited for mounting small printed circuit boards or used as potting boxes. • Moulded in a choice of black, grey or translucent blue general purpose ABS plastic. • Satin texture finish. • Complete with lid and two self tapping screws. • This series is also available with flanged lids. • Screws are colour matched to enclosure (nickel plated screws with grey enclosures and black plated with black enclosures). • 2 P.C. board standoffs moulded into interior. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Some sizes are available with a keyring kit. • Models with key ring kit are predrilled in the narrow side.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Ideally suited for mounting of printed circuit boards horizontally. • Moulded in ABS plastic (material has a UL94-HB rating). • Choice of three (3) lengths in five (5) colours. Stocked in black, grey, translucent clear, translucent smoke and translucent red. • Satin texture finish. • Cover is recessed for easy label installation. • Complete with lid and two self tapping screws (plated for grey and clear, black for all other colours). • Two (2) of four (4) P.C. board standoffs moulded into interior depending on enclosure size. • Designed to meet IP54.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Ideally suited for dongles and/or mounting small printed circuit boards with USB connectors. • Moulded in ABS plastic (material has a UL94-HB rating). • Choice of three (3) lengths in five (5) colours. Stocked in black, grey, translucent clear, translucent smoke and translucent red. • Satin texture finish. • Cover is recessed for easy label installation. • Complete with lid and two self tapping screws (plated for grey and clear, black for all other colours). • Two (2) or four (4) P.C. board standoffs moulded into interior depending on enclosure size. • Designed to meet IP54. • USB connector is not included.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Top and bottom made from 12 gauge aluminium finished in beige. • Top and bottom are attached to an internal aluminium extrusion which contains mounting slots for printed circuit boards or panels. • Front and rear panels are natural aluminium (paper coated one side) which are attached with screws to the aluminium mounting extrusion. • Panels can be easily removed for access to components. • Tops and bottoms are available in solid or with vent slots. • All hardware and self-adhesive rubber feet are included. • Replacement hardware packages include front panel screws, side screws, extrusions, and rubber feet.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Ideally suited for vertical mounting of printed circuit boards; internal side walls included moulded in card guides. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP45. • Lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Smooth black finish with black screws.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards for hand-held, desktop or wall mount applications. • Front and rear panels are integral part of bottom unit. • Moulded in polystyrene plastic. • Designed to meet IP54. • Assembled with four M4 x 0.7" (14mm) slotted machine screws (included) threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. Screws are hidden in a recess in the base. • Includes four M3 x 0.276" (7mm) self tapping screws for internal standoffs. • Lid is a smooth light grey (RAL 7035) and the bottom is a smooth dark grey (RAL 7012)
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Two piece construction. Integral card guides accept 1.5mm (0.062") P.C. cards. 0.20" diameter stand off bosses in the base for supporting various subassemblies. • Integral brass bushings with four M3 x 0.5" x 8mm (0.31") Philips pan head screws hold recessed panel into sloping front of case. • 1.01mm (0.04") aluminium panel with paper on one side. • Four self-adhesive feet included. • Stocked in black and grey.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Ergonomically designed for a comfortable fit into the user's hand. • Designed to meet IP54 ratings. • Recessed top for membrane display or pad. • Units with battery door use the long life "three snap" door. • Lap joint construction provides protection against dust accumulation and splashing water. • Moulded in a choice of black, grey or transparent blue general purpose ABS plastic with a satin texture. • Unit is secured with self tapping screws. • Black and transparent blue enclosures include black screws, grey includes nickel finish screws.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Ergonomically designed for a comfortable fit into the user's hand. • Designed to meet IP54 ratings. • Recessed top for membrane display or keypad. • Units with battery door use the long life "three snap" door. • Lap joint construction provides protection against dust accumulation and splashing water. • Moulded in a choice of black, grey or transparent blue general purpose ABS plastic with a satin texture. • Includes one or two aluminium end panels. • Unit is secured with self tapping screws. • Black and transparent blue enclosures include black screws, grey includes nickel finish screws.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • The Bench Case is a British-designed plastic enclosure. • Ideally suited for mounting printed circuit boards for use in bench top applications. • Moulded in a choice of black (RAL 9005) or grey (RAL 9018) - flame retardant ABS plastic. • Satin texture finish. • Complete with plastic top and bottom, removable aluminium front panel, four rubber self adhesive feet and four self tapping screws. • The top panel and bottom halves include a flat display area, perfect for labels or silk screening. • The base is moulded with six bosses for easy P.C. board mounting. • The removable 1.5mm thick aluminium end panel is securely clamped by the two box halves and easily customised. • Hole in rear of enclosure for easy cord access.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications. • Choice of vented or unvented. • Vented versions protection electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors). • Ideally suited for mounting of printed circuit boards. • Slots on the base of the enclosure allow for easy wall-mounting. • Knockout on the base can be removed with a screwdriver and used for wire entry. • Moulded in ABS plastic (material has a UL94-HB rating). • Choice of (4) square/rectangle sizes and (3) circles sizes. Stocked in black, grey, and white. • Satin texture finish. • Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required. • (4) P.C. board standoffs moulded into interior. • Designed to meet IP30.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Ergonomically designed for a comfortable fit into the user's hand. Also suitable for desktop use. • End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips. • Recessed top for membrane display or keypad. • Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements. • Moulded in a choice of black or grey flame retardant ABS plastic with a satin texture. • Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness. • Black enclosures come with black screws, grey enclosures come with nickel plated screws. • Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • The Sink Box series is a British designed extruded aluminium enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards or chassis horizontally. • The enclosure body is formed from a single hollow aluminium extrusion. This gives the unit high strength as well as simplifying assembly. • The aluminium extrusion has fins on one side (the top) which act as a heat sink. Aluminium end panels are attached to each end. • Extrusions are anodised in a choice of either black or clear. • The interior of the enclosure contains: • Numerous slots on both of the shorter sides to accept a P.C. board or chassis • Three "T" slots (one in the top and two in the bottom) which provide an alternative method of mounting chassis or components that need to be cooled by conduction • The single "T" slot in the top takes an M3 half-nut • The two "T" slots in the bottom take M4 half-nuts
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Ideally suited for mounting printed circuit boards. • Can be used in a tabletop configuration or two different wall-mount configurations. • Rounded corners and face provide a more modern look while still offering superior water-tight ratings. • Available in black or grey ABS plastic or UL listed polycarbonate. • ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use. • Polycarbonate versions are UV stabilized for outdoor use and carry a UL94-5VA flammability rating. For indoor or outdoor use. • Polycarbonate versions are cUL and UL 508A listed (File #E65324), NEMA 4, 4X, 6, 6P. ABS plastic versions are not UL listed. • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Gasket is one piece made from high temperature, U.L. listed silicone. • ABS versions are designed to meet IP66.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for harsh industrial environments or outdoor applications (security, outdoor wireless, controls, etc, etc). • Ideally suited for mounting printed circuit boards, panels or DIN rail mounted components. • Designed for wall mounting. Interior is secure as lid screws are behind the lid. Can be made more secure if wall mounted with security screws (tamper resistant screws). • Satin texture finish with smooth recessed surface on lid for a membrane keypad or label. • Standoffs moulded in the interior of the lid and enclosure - designed for #4 x 1/4" self tapping screws (Part number 1555TS100). • Choice of two materials: • General purpose ABS plastic (material carries a UL flammability rating of UL94 HB). Not recommended for outdoor use • Polycarbonate (material carries a UL flammability rating of UL94 5VA @ 3mm) - Recommended for outdoor use • Colour is a light grey (RAL 7035) to help keep heat absorption down.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KGA ENCLOSURES LTD
United Kingdom
Product Features: • Electronic instrument enclosures, designed for mounting printed circuit boards or DIN rail mounted components. • The polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use. • Lid and mounting holes are located outside of the gasket seal. • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly and disassembly). • Heavy duty 16 gauge galvanized steel panels available. • All stainless steel hardware to avoid corrosion caused by dissimilar metals. • Gasket is a preformed, high temperature U.L. listed silicone rubber. Gasket is replaceable. • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Internal DIN rail mounting tabs.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Ideally suited for mounting printed circuit boards or DIN rail mounted components. • ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use. • Polycarbonate versions are UV stabilized for outdoor use. Grey polycarbonate carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating. • Polycarbonate versions are cUL and UL 5008A listed (File #E65324). ABS plastic versions are not UL listed. • Enclosure colour is a light grey (RAL 7035). • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed). • Polycarbonate versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 and 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Thick wall design with an average wall thickness of 0.13" (3.3mm). • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (carries a UL flammability rating of 94V-0). • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Black with matte textured finish.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure half is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Two sets of vertical 1.5mm (0.062") P.C. board guides are moulded into case halves front and rear. • Front and rear panels are 1.6mm (0.064") brushed aluminium with protective paper on one side. • Cases halves are secured with M3 x 0.5" x 10mm (0.39") Philips machine screws threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Integral horizontally P.C. card mounts on Eurocard centers.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • The Clipper Series is a British-designed hand held enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards for use in hand held applications. • Ergonomically styled for a secure and comfortable grip. • Moulded in a choice of black (RAL 9005) or grey (RAL 9018) - flame retardant ABS plastic. • Satin texture finish. • Complete with top and bottom, removable front panel, battery door (except on the smallest size) and three self tapping screws. • The top panel has a flat display area, perfect for labels, silk screening, membrane keypads or easily machined. • The base is moulded with bosses for easy P.C. board mounting. • The removable end panel is securely clamped by the two box halves and easily customised or replaced by an infrared panel. • Battery compartment (except on the smallest size) suitable for a 9V (PP3) battery. Battery clip not included.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Standard versions from flame retardant ABS plastic (carries a UL flammability rating of 9V-0). • On standard and water-tight versions, countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly required. • Economy version is moulded in general purpose ABS plastic. • Economy version utilizes self tapping screws into plastic posts (no brass inserts). • Standard and economy versions are rated IP54, but can be upgraded to IP66 with gaskets and screws with O-rings. • Water-tight versions are rated IP66. • Stocked in black and grey with matte textured finish.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Ideally suited for vertical mounting of printed circuit boards (internal side walls include moulded in card guides). • Integral card guides accept 1.5mm (0.062") P.C. cards. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Standard versions are moulded from easy to machine flame retardant ABS plastic, which carries a UL flammability rating of 94V-0. • Economy versions are moulded from general purpose (not flame-retardant plastic). • On standard versions the lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Economy versions are assembled with self tapping screws into fully plastic posts. • Black enclosures include black screws, while all others include standard nickel finish screws.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Ideally suited for mounting printed circuit boards. • Perfect for applications where parts, sensors or indicators need to be visible. • Ice Blue version is almost totally transparent to blue, white and near white Led's, readouts and displays. • Crystal Clear version is almost totally transparent. • IR Red version is almost totally transparent to infrared devices. • Integral card guides accept 1.5mm (0.062") P.C. cards. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Moulded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2). • Lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Ideally suited for mounting printed circuit boards horizontally. • Internal sides of enclosures are smooth for easy connector installation except for the largest enclosures. The 1591XXF size is a universal type which includes P.C. boards standoffs in the lid and enclosure PLUS includes card guides. • Strong tongue and groove lid to box construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Lid and box both contain- moulded in PC board standoffs. • Standard black and grey versions moulded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Transparent blue and all economy versions are moulded from general purpose (not flame-retardant) plastic. • Stocked in satin texture black and grey.
Request for a quoteGSPK CIRCUITS LTD
United Kingdom
We can make, test and despatch conventional and double-sided plated through hole (PTH) printed circuit boards within 48 hours of receipt of manufacturing data. Provided we receive the data early enough on day one.
Request for a quoteResults for
Printed circuit boards - Import exportNumber of results
28 ProductsCompany type