Electronic%20components - Import export

Product Features: • All models impregnated with a moisture and fungus resistant varnish. • Lead length of 1.5" (+/- 0.13"). • Wound for low distributed capacity by using solenoid (single coil) windings. • Includes vinyl insulation cover. • Ambient temperature range -40°C to +105°C.

Product Features: • 20 Output voltages to choose from (5 - 120VAC R.M.S.). • Six VA size models available from - 1.1 to 36VA. • Both series operate on 50/60 Hz. current. • Low profile, split bobbin design. • Dual winding secondaries, non-concentrically wound. • Units are designed so that all windings must be used. • Low primary to secondary coupling - no electrostatic shield required. • Choice of economical single primary 115V (164 Series) or universal dual primary 115/230V (162 Series) - either model 50/60 Hz. operation. • High insulation - Hipot of 2,500V RMS. • Class B insulation - 130°C. • No mounting hardware required on 1.1 and 2.4 VA sizes, two hole mounting on 6, 12 and 20VA sizes, four hole mounting on 36VA size (mounting screws not provided). P.C. board mount with industry standard pin spacing. • c UL us recognized.

Product Features: • Pin type, miniature size, P.C. board mount, net weight of only 0.1 oz. • Rugged potted construction produces a completely sealed unit withstanding severe environmental conditions. • Secondary may be used as primary and primary as secondary. • Power level: Minimum frequency range: 300 Hz. to 100 Khz. +/- 0.5 db @ 100 mw. • Frequency range @ +10 dbm is 200 Hz. to 100 Khz. +/- 0.5 db • Frequency range @ +15 dbm is 200 Hz. to 100 Khz. +/- 0.5 db • Frequency range @ +20 dbm is 300 Hz. to 100 Khz. +/- 0.5 db • Frequency measurements with no D.C. current saturation 101D

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade 5, Class S). • Peak working voltage rating of: 200V. • Referring to figures 1-9, if connection is not used - no pin will exist.

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).