Results for
OMNITRACK
United Kingdom
Light-duty ball transfer units are assembled from pressed sheet steel components, except for the LP series which are machine turned from an acetal solid bar. All light-duty ball transfer unit designs feature a hemispherical cup for the recirculation of the small supporting balls. This allows a smooth rotation of the protruding, load-bearing ball. All light-duty ball transfer units (except LP) feature a heat-treated support cup which is resistant to wear.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for drop in replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Material used and design specs. were kept as close as possible to the original part to preserve the stock "tone".
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Primary 117/234 VAC, 50/60 Hz. • All units have dual secondaries except 266LA25 (C.T. secondary only). • Secondaries can be used as; a center tapped secondary, parallel connectors or used individually (except 266LA25). • Units are designed for use with all windings engaged. • Open style. • Minimum 6" long leads. • Dual bobbin design - no electrostatic shield required. • We use Class B insulation (130°C) for extra protection - UL listed as a Class A (105°C) design. • Hi-Pot test of 2,000V RMS. • UL listed (#E207860) Type 3AH. • CSA certified (209651).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for push-pull tube output circuits. • Units are designed to provide ample "headroom" at bass frequencies (note the weight of each transformer). • All models have a secondary tapped fro 4, 8 or 16 ohm outputs. • Enclosed (Shielded), 4 slot, above chassis Type "X" mounting. • Manufactured with plastic coil forms for coil support and insulation. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • All units (except the 1650G) include 40% screen taps for Ultra-Linear operation (if desired). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. The 1650G does NOT have primary screen taps and will not support "Ultra Linear" applications.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for drop in replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Material used and design specs. were kept as close as possible to the original part to preserve the stock "tone". • Output transformers marked UPGRADE allow for more versatility by added secondary connections that did not exist on the original units.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • 20 Output voltages to choose from (5 - 120VAC R.M.S.). • Six VA size models available from - 1.1 to 36VA. • Both series operate on 50/60 Hz. current. • Low profile, split bobbin design. • Dual winding secondaries, non-concentrically wound. • Units are designed so that all windings must be used. • Low primary to secondary coupling - no electrostatic shield required. • Choice of economical single primary 115V (164 Series) or universal dual primary 115/230V (162 Series) - either model 50/60 Hz. operation. • High insulation - Hipot of 2,500V RMS. • Class B insulation - 130°C. • No mounting hardware required on 1.1 and 2.4 VA sizes, two hole mounting on 6, 12 and 20VA sizes, four hole mounting on 36VA size (mounting screws not provided). P.C. board mount with industry standard pin spacing. • c UL us recognized.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Dual 117/234 VAC primary, 50/60 Hz. operating. • Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer. • Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware (except the 1,500 VA size). • 1,500 VA size - is supplied with a potted center for extra strength. • Minimum 8" long flexible leads. • Manufactured using Class B (130&de C) materials. • Hi-Pot test of 4,000VAC RMS between primary and secondary. • UL recognized to UL506 (XPTQ2.Guide) UL file #E207860. • CSA certified to C22.2 #66 - CSA file #209651. • CE compliant to IEC 61558-2-4.
Request for a quoteBUDENBERG GAUGE CO LTD
United Kingdom
The BGP base can be used with any BGP series piston, allowing testing from 15 mbar to 120 bar. The base requires a supply of gas slightly above test pressure, and has precision inlet / outlet valves and a screwpress to enable easy regulation and adjustment of pressure. The BGP1 has a 1/2in2 high chrome steel piston/cylinder unit. The design has been proven over many years to provide excellent sensitivity and stability. Low start pressure is achieved through use of a hollow piston and aluminium head. NOTE: Model BGP1 can be used on vacuum with a model 24 adaptor. All certificates issued for Budenberg Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.
Request for a quoteOZCON ENVIRONMENTAL
United Kingdom
ECOKITCHEN commercial kitchen extraction filtration unit is designed specifically for the removal of smoke and grease particles from the air stream of commercial kitchen exhaust systems and for the elimination of odour. The electrostatic filters inside the module guarantee a constant efficiency of filtration and, thanks to a high ability of separation and accumulation of grease, allow a remarkable energy-saving and low drop pressure. ECOKITCHEN is a zero-emission Ecology Unit for commercial kitchens. A perfect complete solution for all restaurants, cafes, pubs, food factories etc.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HERSCHEL INFRARED LTD
United Kingdom
The Herschel Advantage IRP4 Industrial heater consists of 4 high-emission ceramic heating elements mounted in a directional reflective unit. It is designed to gently warm people indoors using infrared radiated heat. As there are no exhaust emissions there is no requirement for planning; They operate silently and without fumes – consequently raising no health and safety issues; Installation is much cheaper than oil or gas alternatives – all you require is electric cable; No maintenance. You do not have to maintain an infrared heater once installed; You can “focus” the heat exactly to where you want it – because there is no convection of heat, none is wasted blowing into areas it is not wanted; Space heating can be used anywhere there is a requirement to heat a large volume and where the heaters themselves can be placed out of reach.
Request for a quoteLAYTON TECHNOLOGIES
United Kingdom
THE ADDITION OF ULTRASONICS TO THE MAJORITY OF CLEANING PROCESSES CAN REDUCE THE REQUIRED CLEANING TIME BY UP TO 80%. These hermetically sealed, modular stainless-steel submersible units are designed for use in new systems or retrofitted into existing systems to give you the benefits of ultrasonic capability. In order to obtain the best results, the number and location of transducers within the parts cleaning tank is determined based on the geometry of the parts cleaning tank and the type of contamination to be removed. The immersible transducers are designed for use in a heavy, industrial environment. The hermetically sealed welded housings are manufactured from 316 stainless steel and undergo a rigorous testing procedure prior to installation. The modular nature of the bolt-in units allows for flexibility with regard to the location of the submersible units and ease of access for service & maintenance … ** Click for more **
Request for a quoteGL JONES PLAYGROUNDS LTD
United Kingdom
The inclusive Flint Unit is designed for children of all abilities, promoting inclusive play with the adapted wider staircases, wide slide, multiple level hand rails and a play panel! Children can gain access to the platform by either testing their strength on the half pipe climb or by taking the easier route up the inclusive staircase. The staircase has been designed around the average household steps to reduce difficulty and increase confidence for the child. List of Features:- 1 Deck - 1m High Wide Slide - Inclusive Staircase - Play Panel - Half Pipe Climb - Multiple Level Handrails
Request for a quoteINTEGRATEAIR FILTRATION
United Kingdom
A range of self cleaning filter units designed to handle the displaced air from sealed vessels that are either being fed mechanically by equipment such as screw conveyors or by gravity from hoppers or vessels such as FIBC’s. Three different filter sizes availableAvailable with a wide range of filter medias to ensure that each NANO SF filter is supplied application specific The NANO SF filter uses a pleated, conical cartridge filter to provide optimum filter cleaningManufactured to a standard Pred construction of 1 bar The NANO SF filter unit has the option to be supplied suitable for location within a Zone 21 or 22 atmosphere if required Available with a flat edge and clip together with a matching collar for ease of mounting or can be supplied with alternative connections that are application specific such as a welded or loose fitted flange The NANO SF filter is the answer to the problem of blinded filter socks so often used to vent displaced air from vessels.
Request for a quoteINTEGRATEAIR FILTRATION
United Kingdom
Introducing integratedAIR Filtration’s BlueClean® VCP range of self-cleaning pulse jet cartridge filter units. A versatile range of high efficiency filter units incorporating conical filter elements providing highly effective filter cleaning even when dust loadings are high. Our VCP Square unit can be supplied as an insertable, flanged open base or complete free standing filter unit with each design being able to be supplied with or without inlet mounted fan sets. The VCP Square, a range of high quality pulse jet filter units designed for use within processing and dust control applications and part of the Industrial Air Filtration range, dust control filter units built without compromise.
Request for a quoteDATUM ELECTRONICS LTD
United Kingdom
FF410 Static Torque Transducer provides a competitive option within the reaction transducer market Static Torque Sensor/Transducer FF410The Datum Electronics Series 410 Static torque sensor was developed following developments of our FF420 series of rotary torque transducers. The same basic shaft components and strain gauge technology have been applied to our 410 Reaction transducer range providing a competitive option within the static transducer market. SERIES 410 REACTION TORQUE TRANSDUCER - Flange Mounted static transducer - Flange torque transducer match standard DIN Flanges - Ideal design for easy fitting to test rigs and drive systems - No bearings with lightweight hollow shaft unit - Unique design offers high torsional stiffness model - Standard 410 reaction torque sensor range available from 250Nm-10,000Nm - Strain gauge output compatible with Datum Type310, Type324, Type 300 Indicators. ** Click for more **
Request for a quoteMAN HYDRAULICS & ENGINEERING LTD
United Kingdom
Standard and special design units up to 45kw and beyond , fixed and variable units can be supplied to customer specification with options such as drip tray, bund, cooling and heating.
Request for a quoteGSTILL LTD
United Kingdom
Genio Still 250 is a complete distillation unit designed for distilleries engaged in the production of alcohol for commercial purposes. 400V Power Supply - 5 Pin Isolator Switch - 45 Amp Current - Total Height 270cm Achievable Production Output 28l/h
Request for a quoteResults for
Unit design - Import exportNumber of results
26 ProductsCountries
Company type
Category