Unit design - Import export

Light-duty ball transfer units are assembled from pressed sheet steel components, except for the LP series which are machine turned from an acetal solid bar. All light-duty ball transfer unit designs feature a hemispherical cup for the recirculation of the small supporting balls. This allows a smooth rotation of the protruding, load-bearing ball. All light-duty ball transfer units (except LP) feature a heat-treated support cup which is resistant to wear.

The BGP base can be used with any BGP series piston, allowing testing from 15 mbar to 120 bar. The base requires a supply of gas slightly above test pressure, and has precision inlet / outlet valves and a screwpress to enable easy regulation and adjustment of pressure. The BGP1 has a 1/2in2 high chrome steel piston/cylinder unit. The design has been proven over many years to provide excellent sensitivity and stability. Low start pressure is achieved through use of a hollow piston and aluminium head. NOTE: Model BGP1 can be used on vacuum with a model 24 adaptor. All certificates issued for Budenberg Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.

ECOKITCHEN commercial kitchen extraction filtration unit is designed specifically for the removal of smoke and grease particles from the air stream of commercial kitchen exhaust systems and for the elimination of odour. The electrostatic filters inside the module guarantee a constant efficiency of filtration and, thanks to a high ability of separation and accumulation of grease, allow a remarkable energy-saving and low drop pressure. ECOKITCHEN is a zero-emission Ecology Unit for commercial kitchens. A perfect complete solution for all restaurants, cafes, pubs, food factories etc.

Ideal if the board needs to be moved throughout the day from location to location or to be locked in a safe overnight The Keytracker key drop box can be mounted to the wall The horizontal unit is designed to stand alone as a secure post box The medium chute is suitable for walls between 185mm and 300mm thick This will accept items measuring up to 130mm x 50mm x 40mm The faceplate measures 224mm (W) x 160mm (H) and is angled at 45 degrees The drop box which is attached to the chute above is fitted on the inside of the wall/building and the dimensions are 445mm (H) x 205mm (W) x 185mm (D). This is 1.2mm thick steel and has heavy-duty hinges.

The Herschel Advantage IRP4 Industrial heater consists of 4 high-emission ceramic heating elements mounted in a directional reflective unit. It is designed to gently warm people indoors using infrared radiated heat. As there are no exhaust emissions there is no requirement for planning; They operate silently and without fumes – consequently raising no health and safety issues; Installation is much cheaper than oil or gas alternatives – all you require is electric cable; No maintenance. You do not have to maintain an infrared heater once installed; You can “focus” the heat exactly to where you want it – because there is no convection of heat, none is wasted blowing into areas it is not wanted; Space heating can be used anywhere there is a requirement to heat a large volume and where the heaters themselves can be placed out of reach.

The inclusive Flint Unit is designed for children of all abilities, promoting inclusive play with the adapted wider staircases, wide slide, multiple level hand rails and a play panel! Children can gain access to the platform by either testing their strength on the half pipe climb or by taking the easier route up the inclusive staircase. The staircase has been designed around the average household steps to reduce difficulty and increase confidence for the child. List of Features:- 1 Deck - 1m High Wide Slide - Inclusive Staircase - Play Panel - Half Pipe Climb - Multiple Level Handrails

A range of self cleaning filter units designed to handle the displaced air from sealed vessels that are either being fed mechanically by equipment such as screw conveyors or by gravity from hoppers or vessels such as FIBC’s. Three different filter sizes availableAvailable with a wide range of filter medias to ensure that each NANO SF filter is supplied application specific The NANO SF filter uses a pleated, conical cartridge filter to provide optimum filter cleaningManufactured to a standard Pred construction of 1 bar The NANO SF filter unit has the option to be supplied suitable for location within a Zone 21 or 22 atmosphere if required Available with a flat edge and clip together with a matching collar for ease of mounting or can be supplied with alternative connections that are application specific such as a welded or loose fitted flange The NANO SF filter is the answer to the problem of blinded filter socks so often used to vent displaced air from vessels.

Introducing integratedAIR Filtration’s BlueClean® VCP range of self-cleaning pulse jet cartridge filter units. A versatile range of high efficiency filter units incorporating conical filter elements providing highly effective filter cleaning even when dust loadings are high. Our VCP Square unit can be supplied as an insertable, flanged open base or complete free standing filter unit with each design being able to be supplied with or without inlet mounted fan sets. The VCP Square, a range of high quality pulse jet filter units designed for use within processing and dust control applications and part of the Industrial Air Filtration range, dust control filter units built without compromise.

FF410 Static Torque Transducer provides a competitive option within the reaction transducer market Static Torque Sensor/Transducer FF410The Datum Electronics Series 410 Static torque sensor was developed following developments of our FF420 series of rotary torque transducers. The same basic shaft components and strain gauge technology have been applied to our 410 Reaction transducer range providing a competitive option within the static transducer market. SERIES 410 REACTION TORQUE TRANSDUCER - Flange Mounted static transducer - Flange torque transducer match standard DIN Flanges - Ideal design for easy fitting to test rigs and drive systems - No bearings with lightweight hollow shaft unit - Unique design offers high torsional stiffness model - Standard 410 reaction torque sensor range available from 250Nm-10,000Nm - Strain gauge output compatible with Datum Type310, Type324, Type 300 Indicators. ** Click for more **

Standard and special design units up to 45kw and beyond , fixed and variable units can be supplied to customer specification with options such as drip tray, bund, cooling and heating.