Push-pulls - Import export

High pull and push force to operate range of chucks Light wieght and compact design Large Through Hole Kitagawa hydrualic cylinders are made with high grade alloy steel. The S series cylinders are Kitagawa's standard range of hydrulic cylinder and are fitted as standard to a wide range of machines. The cylinder can be bought as a single unit or to suit a required machine under request.

Product Features: • Designed for general purpose or replacement use in Push-Pull tube output circuits. • Frequency response: 150 Hz. - 15 Khz at full rated power (+/- 1 db max. ref. 1 Khz). • Open style with minimum 5" long primary leads. • Secondary solder lugs for convenient secondary connections (except 125B - uses minimum 5" secondary leads). • Primary impedances from 1,200 to 25,000 Ohms. • Secondary impedances from 1.5 to 15 Ohms.

Product Features: • Designed for general purpose or replacement use in push-pull tube output circuits. • Frequency response: 150 Hz. - 15 Khz. (+/- 1 db max. ref. 1 Khz.). • Open style with minimum 10" long primary and secondary leads.

Product Features: • Designed for general purpose or replacement use in push-pull tube output circuits. • Frequency response: 150 Hz. - 15 Khz. (+/- 1db max. ref. 1 Khz.). • Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections.

Product Features: • Designed for push-pull tube output circuits. • Enclosed (shielded), 4 slot, above chassis Type "X" mounting. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • Manufactured with plastic coil forms for coil support and insulation. • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. • Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications.

Product Features: • Designed for push-pull tube output circuits. • Enclosed (shielded), 4 slot, above chassis Type "X" mounting. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • Manufactured with plastic coil forms for coil support and insulation. • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. • Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications.

Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.

Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.

Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.

Product Features: • Designed for push-pull tube output circuits. • Units are designed to provide ample "headroom" at bass frequencies (note the weight of each transformer). • All models have a secondary tapped fro 4, 8 or 16 ohm outputs. • Enclosed (Shielded), 4 slot, above chassis Type "X" mounting. • Manufactured with plastic coil forms for coil support and insulation. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • All units (except the 1650G) include 40% screen taps for Ultra-Linear operation (if desired). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. The 1650G does NOT have primary screen taps and will not support "Ultra Linear" applications.

Product Features: • Designed for general purpose or replacement use in push-pull or phase inverter tube driver circuits. • Should not be used for single ended applications. They have no gap for DC bias current present in SE mode. • Open style with minimum 5" long primary leads. • Minimum frequency response 150 Hz. - 15 kHz. (+1 /- 3db) @ 1 kHz. • Part number 124B is the same as 124A except for 49% Nickel laminations for greater fidelity. • Part number 124C is the COIL ONLY.

Apex storagewall by Abox is a complete, high specification system, that can be used across a broad range of sectors. When combined with our exemplary service and value for money, this made-to-measure storagewall system is hard to beat. Locks and Handles Standard units are supplied with secure rim locks and two folding keys (master keys are available). Alternatively we have options for keyless and agile locking. Doors can even be non-locking, pull knobs, push to release and finger pulls available. Please see our primary locking options below. Feel free to contact us to discuss your specific requirement, we will be more than happy to offer a locking solution to suit. ** Ask for a quote **

Single Tier Battery Transfer Cars Our single tier transfer car has twin roller beds for carrying two batteries, and works with single tier storage modules. It is either mains or battery powered and has an operator cab with ergonomic push button controls. Traction batteries of all types can be handled. They are loaded and unloaded by the magnetic push/pull arm in a fast and efficient process that removes the need for operator input. This transfer car has a 3000kg capacity. Minimise downtime and maximize use of space with single and multi-tier solutions. Ride on transfer car systems are the most efficient way to change and store batteries, making the best use of the smallest amount of valuable floor space within your distribution centre. Use with any type of trucks with roll out batteries, spread equally over either one, two or more levels of storage and accessed using a dedicated system transfer car. ** Click for more **

Multi-Tier Battery Transfer Cars The machine has two roller beds for carrying two batteries whilst operating its battery changing functions. The batteries are moved east-west by attaching a magnet and pulling or pushing. The machine moves in a dedicated aisle, which is a pedestrian ‘No Go’ area. The machine rises to a second, or third (for three tier car) level for the top row of batteries. It can access batteries on both sides of the aisle on all levels. This machine has a lifting capacity of 3000 kilograms. The power supply is through a power rail system and is 440/380 volts three phase; this part of the supply is protected with an R.C.D. (residual current detector) and a circuit breaker. The supply feeds the main hydraulic pump motor, which is 5 kilowatts. The various speeds of the car are controlled by an inverter, which in turn controls the speed of the hydraulic pump. This is housed in an enclosure at the opposite end of the machine to the operator.