Calibrating - Import export

The BGP base can be used with any BGP series piston, allowing testing from 15 mbar to 120 bar. The base requires a supply of gas slightly above test pressure, and has precision inlet / outlet valves and a screwpress to enable easy regulation and adjustment of pressure. The BGP1 has a 1/2in2 high chrome steel piston/cylinder unit. The design has been proven over many years to provide excellent sensitivity and stability. Low start pressure is achieved through use of a hollow piston and aluminium head. NOTE: Model BGP1 can be used on vacuum with a model 24 adaptor. All certificates issued for Budenberg Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.

Model 179 Differential Pressure Gauge The gauge is designed to withstand full working pressure, applied separately to either connection or together. The maximum working pressure should not be exceeded even temporarily, so the possibility of surging pressures should be considered when selecting the instrument. Model 180 Microvar Differential Pressure Gauge Melinex is a polyester film (polyethylene terephtalate) that is resistant to all petroleum refining industry fluids. Please consult our technical department to check the suitability for other chemicals. Model M24 Bellows Type Differential Pressure Gauge Designed around a balanced bellows system, which converts the differential pressure into a rotary movement by way of a torsion tube assembly and mechanical linkages. The entire assembly is liquid filled, producing a hydraulic self lubricating measurement system which allows for full line pressure to be applied to either side of the unit without damage to the device.

Bourdon Tube Pressure Gauge - Defence Standard Designed for Naval and Marine applications in accordance with Def Stan 66-2. This gauge has been designed to withstand high level of shock and are all manufactured in accordance with EN837 -1. The 4" and 6" flush mounting versions are available with 3 Hole front fixing flange . Bourdon Tube Oxygen Pressure Gauge The 950GP incorporates a solid baffle wall and blow-out back for operator protection and standard features such as IP67 environmental protection, not normally available on comparative units. The 950GP is specifically manufactured for use on OXYGEN and as such is cleaned for Oxygen service with no oil or grease contamination. A restrictor in the inlet is a standard feature. BFMIRA Vacuum Gauge (Can Piercing Test) The Model 269 is a high specification vacuum gauge specifically designed for the estimation of the intensity of vacuum in a food can. Developed by the British Food Manufacturing Industries Research Association.

Schaffer Diaphragm gauges are designed for use on slurries, viscous or corrosive fluids that would normally attack or block standard bourdon tube gauges. 316 Stainless Steel full safety pattern case. Implementing specialist materials for both the connection and diaphragm enable the Shaffer Diaphragm gauge to be configured for use on any gaseous or liquid media including suspended solids or powders. The direct drive from the diaphragm to the movement ensures a more positive indication of pressure than other models of tube gauges. Offering a full range of screwed connection sizes and materials, Schaffer Diaphragm gauges can operate at pressure ranges as low as 30 mBar with the option to permit units to withstand a maximum pressure of 70 bar.

Model 5214 Standard Test Gauge Our 0.25% accuracy Standard Test Gauge is undoubtedly recognised as a world leader for its accuracy and, of course, Budenberg Quality. This gauge incorporates a base test gauge accuracy with to a maximum of 500 graduations where possible, along with a knife edged pointer and an anti parrallax mirror to help reduce the chance of human error. Model 5314 MasterTest Gauge The 5314 now provides a higher specification and incorporates many additional features as standard. Housed in a new die-cast safety pattern case, the 5314 meets the full requirements of EN837 including a brighter anti-parallax mirror scale & knife-edge pointer for accurate repeatable readings. Model 5414 Super Test Gauge The 5414 now provides a higher specification and incorporates many additional features as standard. Housed in a new die cast safety pattern case, the 5414 meets the full requirements of EN837.

The Classic range of Pressure Gauges has been designed to meet the high demands of the process industry. From harsh corrosive chemical applications to general engineering uses, the Classic combines a high specification with a very cost-effective price. The standard unit incorporates 316 stainless steel wetted parts that are housed within a liquid fillable 316 stainless steel case. Standard units are available as dual scale bar and psi but custom scales can be supplied. 316L wetted parts and cases are available as an option. Available with a wide range of accessories including: Syphons, Snubbers, Gauge Savers, Manifolds, Diaphragm Seals etc ensures that Budenberg can provide you with the right product to suit any individual application or requirement. Scale Ranges: 0 to 1 bar to 0 to 1400 bar or equivalent units of pressure / vacuum are available. Size: 100 mm (4”) & 150mm (6") Mounting: Direct, Flush or Surface

Fast response, exceptional repeatability and accuracy are just some of the standard features of our range of Bimetallic or Filled System Temperature Gauges. We have an extensive range of systems, options and configurations and can provide a cost effective solution to all your temperature measurement needs. Budenberg Gauge Co Ltd is a premier manufacturer of instrumentation for Chemical, Food and Beverage, Oil and Gas, Petrochemical, Pharmaceutical, Power Generation and Transmission, Refrigeration, Water and Waste Water markets. Quality and reliability have become the trademark of all Budenberg products and all our instruments are supplied with a minimum 1-year guarantee and carry a unique serial number for traceability purposes. Budenberg provides highly specialised machined - to complete products for niche industries globally. Our resources allow for bespoke solutions from finished product to machined components.

The BGH series base can be used with any of the BGH series pistons to give ranges 1-120 bar with a BGH120, 2-300 bar with a BGH300, 1-700 bar with a BGH700 and 1-1200 bar with a BGH1200 . All units are top loading for ease of use and weight sets are fully interchangeable. This means that weight sets in alternative pressures are readily available and customers with more than one %*+ series tester can interchange weight sets between testers of the same range. The base features a dual area screwpress which allows low-pressure priming and high-pressure control. The BGH is a robust design, proven over many years usage. The unit has a 1/16in2 fully hardened and stabilised tool steel piston. This unit gives extremely good sensitivity for high accuracy calibration, yet is tough enough for regular use in a workshop environment.