Seal systems - Import export

The Advance EnergyManager is a tried and tested design with an internal heat exchanger and shunt pump arrangement resulting in delivery of hot water equivalent to the volume of the tank at 43ºC. It works on the thermal store principle of storing primary (central heating) water and delivering mains pressure hot water through a heat exchanger. The shunt pump is pre fitted and wired to activate when taps or showers are turned on. The EnergyManager comes as shown above with wiring centre for installers to complete the wiring for the rest of the system. Full instructions for wiring the total system are included. At 65ºC operation the EnergyManager is perfect for underfloor or low temperature radiator circuits and offers efficiencies due to the temperature being lower than most thermal stores. It delivers hot water equivalent to the capacity of the store.

We’re proud to be continuing the lead-free innovation with Rapid Flash. Replacing traditional lead flashings, Rapid Flash is comprised of our industry-leading rubber flashing cones mounted to the Rapid Flash base which incorporates a cleverly designed mesh encased in a non-toxic rubber polymer. Rapid Flash are love by roofing contractors all over the world, but why? Suitable for all roof profiles - including tile and metal Unique stretchable base allowing for easy dressing Minimal tooling required - very easy to install Market leading sealing system which you can trust UV rated

The Advance Solar EnergyManager is a tried and tested thermal store design with an internal heat exchanger and shunt pump arrangement resulting in delivery of hot water equivalent to the volume of the tank at 43ºC. The solar version has a dedicated solar coil which reduces energy bills and reliance on fossil fuel. The solar thermal panels will contribute to heating and hot water during periods of solar gain. The shunt pump is pre fitted and wired to activate when taps or showers are turned on. The EnergyManager comes as shown above with wiring centre for installers to complete the wiring for the rest of the system. Full instructions for wiring the total system are included. At 65ºC operation the EnergyManager is perfect for underfloor or low temperature radiator circuits and offers efficiencies due to the temperature being lower than most thermal stores. As a thermal store it can reduce boiler cycling and act as a buffer for heating.

The HETAS listed SFUTS pre plumbed pre wired Universal Thermal Store has been designed to link a number of heat sources including gas or oil boilers, wood burners, and solar thermal or PV as well as electric and other inputs. Hot water is safely delivered at mains pressure through a large integral coil for fast bath filling and power showering without a pump. In summer the solar coil, if utilised, will provide most of your hot water needs. In the winter the wood burner, when lit, will handle most of the heating and hot water duties. Central heating is taken from the store which acts as a buffer for fast radiator or under floor heat up. The store is kept hot by the energy inputs controlled by thermostats. Because the unit is a sealed system it is fine for under floor systems. The primaries are 28mm and can be teed off for two separate circuits if required.

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house. The indirect pattern cylinder (TSiC) without the integrated feed and expansion tank has to be fed with a remote F and E tank but can be sited anywhere in the property. They have two coils, the lower one for heat input from a boiler, the higher one for mains fed hot water services. They can be used with sealed system boilers and heating circuits on Y plan systems. These low maintenance pre plumbed units provide flow rates up to 30 litres per minute and if linked to the appropriate gas, oil, or LPG boiler are suitable for average to larger properties. The bottom coil must be pumped. The units look smart too, with a wipe-clean white appliance finish, and the insulation is 60mm foam injected for maximum efficiencies. Stainless steel construction offers a lightweight long life product. The stores are guaranteed for ten years, the parts for two.

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house. The indirect pattern (TSi) Twin Coil with the integrated feed and expansion tank can be sited anywhere in the property. The lower coil can be connected to a sealed system boiler in a Y plan, thus only one pump is needed. The store remains vented, with the contents of the store used as a medium for heat transfer only. These low maintenance pre plumbed units provide flow rates up to 30 litres per minute and if linked to the appropriate gas, oil, solid fuel, biomass or other appliance (except Heat Pumps) are suitable for average to larger properties.

DuctSeal LG (Water & Gas) is a NEW re-enterable duct sealing system that is extremely flexible in its ability to seal cables & pipes in ducted networks to protect and stop the ingress of harmful or flammable gases, liquids, smoke and vermin. DuctSeal LG comes complete with our unique daisy chained circular foam tubes that easily wraps and separates cables to ensure limited movement while applying our NEW flexible intumescent, zero halogen and zero Meko adhesive and sealing compound, GreyStuff. All designed and manufactured in the UK. DuctSeal LG, along with GreyStuff, is a non-hazardous, FyBrid superior single-component, neutral curing sealant that has been specifically developed to cope with the harsh environments around duct openings to ensure ducted networks and penetrations are protected.

DuctSeal HG (Water & Gas) is a NEW re-enterable duct sealing system that is extremely flexible in its ability to seal large, heavy cables & pipes in ducted networks to protect and stop the ingress of harmful or flammable gases, liquids, smoke, and vermin. DuctSeal HG comes complete with our PATENT PENDING unique tubular rubber backing system that can be joined together in a long continuous strip, joined to make a ring/collar, but best of all, joined in a cross shape to create a perfect shape for separating trefoil/triplex cables. This unique design ensures DSEAR compliance but also aids the installer as it’s simple & quick to create the support & separation on large cables or pipes. The PATENT PENDING ULTIMATE backing system, which is one of a kind, is combined with our NEW Fybrid flexible intumescent, zero halogen, & zero Meko adhesive and sealing compound, GreyStuff. All are designed and manufactured in the UK.

The Kraso Universal circular cable transit seal is an optimal solution for cable entry through foundations & cable ducts offering enduring protection against flooding, gas infiltration, humidity, and rodent intrusion. Comprising two components, this seal can be effortlessly set up, even in damp environments and areas with flowing water. This duct sealing system excels in the most demanding conditions. It withstands high water and gas pressures while resisting toxic and hazardous substances. This universal penetration seal is crafted from high-quality, non-corrosive stainless steel V2A. Additionally, it features Kraso's unique patented Torque control nut, which simplifies installation, ensuring that all tightening nuts are neither under-tightened nor over-tightened.