Results for
ENERCON INDUSTRIES LTD
United Kingdom
The benefits of induction technology in a capless sealing process. Successful sealing on both capless and non-screw-cap containers such as snap on caps is now possible with a pressure Sealer incorporating an Enercon Super Seal™ unit. Typically, pressure belt sealing is used to replace conduction sealing or to reduce the dwell-time needed in conduction sealing. Seals are either placed onto the capless containers or reside in the cap as inserted by the cap manufacturer. The capped container is then guided through the induction heating tunnel, where downward pressure is applied to the clip-on cap or foil by a non-metallic recirculating belt. This unique design automatically takes account of component variations and tolerances, such as bottle height variation, product overfill, line speed variation and bottle centres. Incorporates an Enercon Super Seal™ unit • Cap sizes up to 110mm diameter • Conveyor Speed up to 40 metres / minute
Request for a quoteJET FLOW TECHNOLOGIES UK LIMITED
United Kingdom
Gland seal systems very important to main and auxiliary turbines. Turbine shafts must exit their casings in order to couple up or connect with the unit that the turbines drive (reduction gears, pumps, etc.) The main and auxiliary gland seal systems enable the turbine to be sealed where the shaft exits the casing; in effect keeping "air out and steam in." The purpose of gland seal system is to prevent the leakage of air from the atmosphere into turbine casings and prevent the escape of steam from turbine casings into the atmosphere. The gland sealing system provides low pressure steam to the turbine gland in the final sets of labyrinth packing. This assists the labyrinth packing in sealing the turbine to prevent the entrance of air into the turbine, which would reduce or destroy the vacuum in the associated condenser. Excess pressure (excess gland seal) is removed by the gland seal unloader. Since there are times when steam escapes from the seals, a gland exhaust system is provided.
Request for a quoteDIXON GROUP EUROPE LTD
United Kingdom
Interchange Data: • High Pressure Screw-Together Interchange • Parker/Pioneer 3000-Series, Enerpac C604, Stucchi IVHP • Hansen WS56000, Snap-Tite 76-Series, DNP PVM Materials: • Machined components are manufactured using solid Steel or 316 Stainless Steel bar stock • Chrome Steel ball valve is mechanically seated to improve low pressure sealing performance • Steel nipples are machined from solid high strength Steel bar stock • Steel componentry is plated using ROHS Compliant Trivalent Chrome Seal Components: • Urethane seal is standard in ball valve couplers and provides resistance to extrusion when subjected to high pressure - temperature range -40°C to +82°C (-40°F to +180°F) • Nitrile seals are standard in poppet valve couplings, providing a temperature range of -40°C to +121°C (-40°F to +250°F)
Request for a quoteSTAR UNIVERSAL (GOSPORT) LTD
United Kingdom
The Star Vacuum Chamber Sealer The Star vacuum chamber range is used for vacuum sealing products where a high vacuum level is required. The product is placed in an unsealed bag inside the chamber. When the lid is closed the built in vacuum pump evacuates the chamber and seals the bag whilst in a vacuum. On completion of the sealing cycle atmospheric pressure is let back into the chamber and the lid opens automatically. Typical applications include food and electronics packing but special versions have been built for the chemical and medical sectors. Bench top and free standing machines Stainless steel finish Single or multiple sealing bars, single and double heat Gas flushing with multiple cycles available Single program and multiple program versions allowing different vacuum and weld parameters to be preset The chamber lid is released on completion of the cycle
Request for a quoteDLR ELASTOMER ENGINEERING
United Kingdom
DLR manufactures high-temperature and high-pressure rubber seals and packers for the oil and gas (storage) industry for both wellhead or Christmas tree applications. We also manufacture vapour barrier materials that provide secondary sealing for large storage tanks to prevent vapour losses, along with packers for oil and gas applications. We combine our rubber compounding expertise with our precision rubber moulding capabilities to produce high-performance that withstand extremes of temperature and pressure to American Petroleum Institute (API) standards. And in an environment where safety is a paramount concern, our products can be relied upon.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CLARK-DRAIN LIMITED
United Kingdom
RECESSED RANGE - AQUA-KNIGHT Water Tight (1metre Head of Pressure) - Odour Tight Sealed & Locking - 46mm Overall Depth, 750 x 750mm 5 Tonne Gross Vehicle Weight (Un-Filled) Loading, Galvanised Steel Cover & Frame - Lifting Keys Supplied
Request for a quoteCLARK-DRAIN LIMITED
United Kingdom
RECESSED RANGE - AQUA-KNIGHT Water Tight (1metre Head of Pressure) - Odour Tight Sealed & Locking - 46mm Overall Depth, 750 x 600mm 5 Tonne Gross Vehicle Weight (Un-Filled) Loading, Galvanised Steel Cover & Frame - Lifting Keys Supplied
Request for a quoteCLARK-DRAIN LIMITED
United Kingdom
RECESSED RANGE - AQUA-KNIGHT Water Tight (1metre Head of Pressure) - Odour Tight Sealed & Locking - 46mm Overall Depth, 600 x 600mm 5 Tonne Gross Vehicle Weight (Un-Filled) Loading, Galvanised Steel Cover & Frame - Lifting Keys Supplied
Request for a quoteCLARK-DRAIN LIMITED
United Kingdom
RECESSED RANGE - AQUA-KNIGHT Water Tight (1metre Head of Pressure) - Odour Tight Sealed & Locking - 46mm Overall Depth, 600 x 450mm 5 Tonne Gross Vehicle Weight (Un-Filled) Loading, Galvanised Steel Cover & Frame - Lifting Keys Supplied
Request for a quoteCLARK-DRAIN LIMITED
United Kingdom
RECESSED RANGE - AQUA-KNIGHT Water Tight (1metre Head of Pressure) - Odour Tight Sealed & Locking - 46mm Overall Depth, 450 x 450mm 5 Tonne Gross Vehicle Weight (Un-Filled) Loading, Galvanised Steel Cover & Frame - Lifting Keys Supplied
Request for a quoteOZBA SPARE PARTS LIMITED
United Kingdom
Cooker Pressure Cooker Indicator And Seal Replacement Fit For Seb & Tefal Clipso Pressure Cooker Indicator And Seal - SS-792382 Cooker Spare Parts Color: Onecolor Features: Fit List:CLIPSO - 4101, 4102, 4103, 4104, 4105, 4106, 4109, 4120, 4121, 4128 Pressure Indicator Seal suitable for Tefal CLIPSO Pressure Cookers 4101 4102 4103 4104, 4105, 4106, 4109, 4120, 4121, 4128
Request for a quoteResults for
Pressure seal - Import exportNumber of results
12 ProductsCountries
Company type