Epoxy - Import export

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade, 5 Class S). • Peak working voltage rating of: 200V. • Referring to figures 1-9, if connection is not used - no pin will exist.

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade 5, Class S). • Peak working voltage rating of: 200V. • Referring to figures 1-9, if connection is not used - no pin will exist.

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade 5, Class S). • Peak working voltage rating of: 100V. • Referring to figures 1-9, if connection is not used - no pin will exist. 101D

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 2 Watt (+/- 1.5 db, 300Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency rating. • Power can be increased slightly at higher frequencies. • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 500 milliwatt (+/- 1.5 db, 300 Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency ratings. • Power can be increased slightly at higher frequencies. • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Product Features: • Primary 115 VAC, 60 or 400Hz. models, 3 case sizes. • Epoxy cast to withstand shock and severe environments. • Two coil design provides balanced windings and low magnetic radiation - no electrostatic shield required. • 228 Series include four, 6-32 x 0.38 machine screw inserts for less strain on P.C. board connections.

Rotafix Zeroset Anchor Grout is a 2-part high strength epoxy system that is used for the fixing of metallic objects into concrete such as anchors and studs. Rotafix Zeroset Anchor Grout has been specifically designed for setting at low temperatures in smooth-walled, diamond drilled holes. This chemical anchor will displace water from a hole then cure under any residual water. This high-performance chemical anchor grout has been approved by the Department of Transport for parapets and street lighting. Additional Information: Compressive Strength: 70N/mm2 Tensile Strength: 16N/mm2 Flex Strength: 32N/mm2 Workable for 20 minutes at 20°C Available Sizes: 500cc (Product code: 3542)

Rotafix Structural Adhesive (RSA) is a high performance unfilled thixotropic slow setting structural epoxy adhesive which is used in timber engineering. The slow setting nature of the epoxy adhesive allows the manipulation of timber joints for a period of time. This is particularly useful for flooring boards, roofing sheets or complex joints. RSA is used extensively for: Bonding rods and plates into timber engineering repairs, such as Timber Resin Splice Upgrading timber strength using bonded in flitch plates GluLam delamination repairs using rods Construction in wood Structural joint glue Moment resisting joints Stressed skin floors Additional Information: Compressive Strength: >60N/mm2 Tensile Strength: 38N/mm2 Tensile Modulus: 2GPa Flex Strength: 70N/mm2 Bond Strength: 6-10N/mm2 Specific Gravity: 1.1 Workable for 6 hours at 20°C

Rotafix Engineering Adhesive is a high strength structural epoxy adhesive, part of the Resiwood product range. The 2-part unfilled epoxy adhesive has a degree of flex which makes it well suited to wood engineering and timber applications. The slow setting nature of Rotafix Engineering Adhesive lends itself to working on site where time is needed to create and move joints prior to finalising the assembly. Additional Information: Compressive Strength: >60N/mm2 Tensile Strength: 40N/mm2 Tensile Modulus: 3GPa Flex Strength: 70N/mm2 Bond Strength: 6N/mm2 Specific Gravity: 1.1 Workable for 6 hours at 20°C Supplied with: Cartridge set Nozzle Follower plate Available Sizes: 400cc (Product code: 3560)

DELO-KATIOBOND UV curing (320-400nm) and light activated (400-550nm) epoxy adhesives are one part solvent free epoxies suitable for bonding, sealing and potting applications. DELO-KATIOBOND light activated adhesives can be used in opaque applications, as once the adhesive has been initiated via visible light, curing starts due to the decomposition of the photo-initiator and continues to completion. The curing is by cationic polymerisation, hence the product name Katiobond. Information on UV Curing Lamps can be found here. The range has good temperature resistance, up to 180 degrees C and excellent chemical resistance, making them ideal for automotive and harsh environment use. The epoxies are dry to touch after cure (no oxygen inhibition occurs). Cured products exhibit low shrinkage, resulting in low stress on delicate devices. Low water absorption and very low ionic content make them ideal for electronic applications. ** Click for more **

DELO-DUOPOX are two part epoxy resin adhesives for bonding, casting and sealing of joints. Providing excellent adhesion to many materials, these two part epoxies are ideal in stressed or extreme conditions, including automotive and engineering applications. Two part epoxies are cold-cured, high-strength materials, which can be used where curing with heat is not an option. They cure when the two components are mixed together in the correct ratio. Product dependant, most versions are available in DELO-AUTOMIX cartridges, which present the two epoxy components (resin and hardener) in the correct ratio via a dispensing / mixing cannula. A wide range of curing properties are available, with rapid cure versions that are firm to touch in less than 10 minutes, to versions that are firm to touch in 8 hours. They offer high chemical resistance and are available in a wide range of viscosities. ** Click for more **

DELOMONOPOX epoxies are one part, heat cured epoxy resin adhesives for bonding, casting and sealing of joints. The epoxy resin adhesives are high strength materials that can be used as alternatives to riveting, welding and brazing in high stress applications. Epoxies exhibit excellent adhesion to metals, ferrites and ceramics. Special advantages of epoxies include their resistance to temperature, chemicals and low water absorption. They will also protect against corrosion. The epoxy resin is supplied ready to use with no mixing required. Curing occurs in 15-75 minutes @ 130-180 degrees C. Versions are available with good flow properties or with high run-off resistance. ** Click for more **

We have completed plant room flooring projects at Canary Wharf, Schroders and Import Export Building. Waterproofing, reduce dust levels and easy to clean. Ideal solution to areas with leaking plant / equipment.

We can install epoxy flooring quickly with minimal disturbance to your business. Benefits: Cost effective flooring solution Reduces dust Hard wearing Easy to clean Chemical resistance

Industrial floor painting. Anglia Decor Ltd. Chas accredited for health and safety. Specialist in floor painting, providing nationwide coverage. We prepare the floor using diamond grinding and vacublasting, this ensures the resin coatings adhere well to the floor. Get in touch for a free quote