Epoxy - Import export

ALWA EPT 210 is a laminate and backfilling resin. Laminates can be produced with ALWA EPT 210 in order to manufacture glass fibre plastic parts, gauges, templates, moulds and applications with diverse fillers. ALWA EPT 210 is an epoxy resin that has a low viscosity and a light yellow colour. Under exothermic reaction, it cures in connection with the light yellow hardener H 10 at room temperature. The mixture shows a low viscosity and is particularly appropriate for laminating layers of up to 8 mm. For thicker laminates the application of layers must be interrupted several times in order to avoid too high reaction temperatures in the laminate.

ALWA EPF 10 is a temperature-resistant, steel-filled gelcoat based on epoxy resin. It is used to produce temperature and abrasion resistant surfaces for vacuum, PU foam, thermionic moulds and heating plates, among others.

ALWA HT RESIN is a resin-based on isocyanate and epoxy (EP), which reacts after adding a catalyst. ALWA HT RESIN offers a range of possibilities for producers of fibre-reinforced materials (e.g., glass fibre, kevlar and carbon), semi-finished and finished goods. The system is also suitable for prepreg and reaction compounds. ALWA HT RESIN is particularly interesting for the aerospace and aircraft industry as well for the rail transport, automotive and electronics industry. The application area of epic resins are electro casting resins, lamination and injection technology (RTM procedure), vacuum infusion, casting and ramming compounds, impregnation resin, casting and injection moulding process as well as prepreg technologies, among others. ALWA HT RESIN is offered in two versions. *ALWA HT RESIN M100 with approx. 50 mPa s *ALWA HT RESIN M2200 with approx. 2200 mPa s The resins can be mixed with one another which enables a flexible adjustment of the viscosity.

DECOEPOXY 1C PRECATALYZED, readytouse waterbased acrylicepoxy hybrid technology, with similar performance to conventional 2C epoxy systems, with a quick return to service of the painted substrate. Especially for garages, commercial floors, hospital rooms, surgery rooms, restaurant kitchens, schools, swimming pool decks, metal structures, walls with high resistance to abrasion, etc. Indoor / outdoor use.

Epoxy waterborne paint bicomponent cured with polyamide, for protection of floors of concrete, metal structures, etc.

Transparent epoxy coating of two components with high chemical and mechanical resistance for the protection and decoration of floors. Does not contain solvents (100% solids). Features High transparency. Excellent resistance to yellowing and water staining. Very good resistance to solvents, detergents, acids and diluted bases, gasoline, diesel, brake fluid and lubricating oils. High mechanical resistance. Antidust effect.

2component epoxy paint for the protection of concrete floors, metal structures, etc. Does not contain solvents (100% solids). Features Excellent adhesion on concrete and metal substrates. Film formation hard, elastic and highly resistant. High resistance to chemical products (acids, alkalis, oils, etc.) High mechanical resistance. Antidust coating for concrete floors. Indoor use.

industrial floor with high abrasion resistance, surface protection system

Epoxy Resins are reactive intermediates used to produce a versatile class of thermosetting polymers. They are characterized by the presence of a three-membered cyclic ether group commonly referred to as an epoxy group, 1,2-epoxide, or oxirane. The most widely used epoxy resins are diglycidyl ethers of bisphenol A derived from bisphenol A and epichlorohydrin. The outstanding performance characteristics of the thermosets derived from bisphenol A epoxies are largely conveyed by the bisphenol A moiety (toughness, rigidity, and elevated temperature performance), the ether linkages (chemical resistance), and the hydroxyl and epoxy groups (adhesive agents). In addition to bisphenol A, other starting materials such as aliphatic glycols and both phenol and o-cresol novolacs are used to produce specialty resins.

3,4-Epoxycyclohexylmethyl-3,4-epoxycyclohexanecarboxylate (ECC) is available generally in the liquid form. The color of the chemical varies from white to slightly yellow. ECC is in the category of cycloaliphatic epoxy resins. It is generally produced by employing the Tishchenko reaction of tetrahydro benzaldehyde followed by epoxidation with the help of a peracid. ECC has effective electrical loss properties, high heat-distortion temperature, and good weathering properties. The melting point for ECC is -37 0C.

3,4-Epoxycyclohexylmethyl-3,4-epoxycyclohexanecarboxylate (ECC) is available generally in the liquid form. The color of the chemical varies from white to slightly yellow. ECC is in the category of cycloaliphatic epoxy resins. It is generally produced by employing the Tishchenko reaction of tetrahydro benzaldehyde followed by epoxidation with the help of a peracid. ECC has effective electrical loss properties, high heat-distortion temperature, and good weathering properties. The melting point for ECC is -37 0C.

All surface treatments called classics are possible, based on the final requirements. Phosphating ; Black Oxide ; Epoxy Paint ; Anodizing ; Hard Chrome Plating ;Electrolytic Zinc Plating; TICN ;Glass Blasting (Glass Beads)

Metal fibre burners for new or existing epoxy powder coating installations Metal fibre burners and infra-red emitters for a more efficient, flexible and compact powder coating installation. POWDER COATING APPLICATIONS Choose the metal fibre burner right from the design stage: Pre/post-treatment, Paint drying, Teflon or ceramic coating, Continuous coating... IMPROVE YOUR FACILITIES The powder coating process: Preparing the substrate: cleaning, pre-heating Application of paint Gelling Polymerisation: hardening paint

Filling compound such as epoxy resin filler (“epoxy putty”), fine filler or repair putty are used for corrosion protection, repairing scratches and unevenness in metal, wood and fibreglass-reinforced plastics. These coatings are mainly used in boat building.

The STRATE AWALIFT 1/2x2 is used in many applications that require small quantities of waste water to overcome a high discharge head. With a capacity of 15 m3/h, the system is suitable for up to 750 EW. The system can be adapted to your individual needs through the use of different motor variations. Drainage of small towns with up to about 750 residents that cannot be drained using natural gradient. Drainage with larger pumping heads and longer pressure pipes As an intermediate pumping station within a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features The tank with two separator systems Four centrifugal pumps ST (M)65/80, motors according to type and operating location required Four pump gate valves One Y-pipe Two STRATE non-return valves Two gate valves Level measurement LGA certified according to DIN EN 12050-1 /. -4

Futuristic and modern design chair

Low shrinkage optical camera module adhesive with LED and/or heatcure for common substrates used in camera modules and LiDAR assemblies, in active alignment, and other optical bonding applications. Features: - Rapid LED or UV/Visible light and/or heat cure - Very low volumetric shrinkage - High Tg and Low CTE - Low ASTM E595 Outgassing - No frozen storage, refrigerated shipment/storage 15°C [3441° F]

MD® 250CTH epoxy is designed for rapid assembly of medical devices with flexible curing options using light only, heat only, or combination of the two. Features: - Cures with UV/Visible light - Secondary heat cure at 8085°C - Flexible light and heat cure - Semiopaque white color - Volumetric shrinkage at 1.3% - High modulus and durometer - No nonreactive solvents - Compliant with ISO 10993

Short description: With double syringe This transparent adhesive retains elasticity after curing and is ideal for jobs in construction and assembly and in fact in all cases where the use of WEICON Easy-Mix Systems would not be efficient. Viscid, self-levelling, very short pot life (3 - 4 minutes), fast-curing, almost colourless, glass clear. WEICON Epoxy Minute Adhesive is especially suitable for occasionally necessary repair and maintenance works. It is applied by using the practical double syringe. This means that resin and hardener are delivered automatically in the right proportions. After this, the mixing is done manually.

Smart automation concepts enable us to meet the highest standards of manufacturing. Our products are manufactured in Germany and made in USA, in a cost-efficient manner. Benefit from our production expertise that has been continuously developed over many decades. Mechanical protection, reliable electrical insulation, moisture shielding and heat dissipation - with continuously optimized potting resins (polyurethanes, epoxies, etc.) and potting equipment, PRUFREX is a leader in the field of vacuum potting. When it comes to the safe protection of your electrical and electronic components, our state-of-the-art, automated manufacturing equipment meets all contemporary requirements. The use of specially adapted epoxy and polyurethane potting compounds ensures excellent potting characteristics and the best-possible impregnation of components and coils. These optimised potting compounds also contribute to optimal heat dissipation.

Low shrinkage optical positioning Epoxy with LED and heatcure capability. Features: - Fast cure with LED or UV/Visible light - Low temperature heat cure (8085°C) - Low shrinkage and CTE - Single component - Cold ship/Cold storage at 15°C - Passes ASTM E595 Outgassing Testing

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

The Tyrolit strip range offers surface treatment tools for industrial and maintenance applications. These strips ensure high efficiency and excellent surface quality for cleaning, deburring and finishing work on metals, composites and plastics. They remove rust, paint and corrosion without damaging the material. Made from durable abrasives, they are available in different grits and compositions and are suitable for manual and automated systems. Tyrolit strips increase productivity in industries such as automotive, aerospace, construction and manufacturing.