Controllers - Import export

The ATEQ F5800 in its industrial format (19″ 3U) is the easiest leak detector to operate and integrate into manufacturing operations. Its comprehensive specifications, including ATEQ’s latest developments in pressure decay technology, make it an extremely versatile instrument. The F5800 offers a touchscreen graphical interface to combine great functionality with simplicity of use with simple and intuitive menu-driven operator controls. AUTOMOTIVE Shock absorbers, gearboxes, tank caps, carburettors, non return valves, cylinder heads, filters, radiators, seals, cylinders, engine oil and water circuits… DOMESTIC APPLIANCES Bottles, percolators, cookers, steam irons, ovens, washing machines… MEDICAL Catheters, dialysis equipment, micropipettes, plastic taps, drain bags, syringes, valves… PACKAGING Aerosol cans and valves, trigger pumps, ink cartridges, cosmestic bottles, food sachets Differential pressure decay leak measurement Large ranges of leak measurement (ΔP) F.S. : 50

The Central Guy Control (CGC) can be used with the System 75 and System 100 masts to bring unparalleled ease, speed and flexibility to deployment. By bringing the control of three guy ropes to one person, the CGC uniquely enables the deployment of a mast system of up to 10m (32.8’) by only 2 people, instead of the usual 4. A video showing the CGC being used in the setup of the SYSTEM 100 mast is here.

The He-490S is the leader among portable tracer gas leak detectors. With a response time less than 0.5 seconds, sensitivity to 10-8 direct reading atm-cc/sec, and the ability to zero-out background, this is the most aggressive portable leak detector in the industry, with advanced features designed specifically for industrial applications. The He-490S can be integrated with our Smart Charge 5 evacuation and backfill station. Fastest response time in the industry (less than 0.5 seconds) Helium background suppression Maintenance free, dry pump Sensitivity to 5 x 10-8 atm cc/sec Less than 3 minutes total start-up time Fully automatic calibration sequence with built-in 10-5 atm cc/sec gas leak Front panel key lock-out Sealed membrane keypad Fully interactive system diagnostics with multilingual displays High output (110dB) adjustable audio alarm Sensitivity: Smallest detectable helium leak rate 5 x 10-8 atm cc/sec Measuring Scale: 7 decades

The F28 LP pressure decay or vaccum decay instrument is the latest addition to ATEQ’s new range : F28. It’s a high peformance, low cost, quality leak tester. Its small packaging enables to mount it near the test part insuring the best measurement conditions. You can easily program and supervise it our super friendly interface: F28 demo. Packaging, blister, watch, mobilephone, pneumatic and hydraulic fittings Pressure decay leak measurement: vacuum to 20 bar Smart pressure regulation without regulator – auto fill (optional) Electronic regulation (optional) Units: Pa, Pa/s, sccm Compact dimensions (overall (mm): h 141.5 x L 225 x D 97) Mechanical or electronic regulator from vacuum to 10 bar Integrated fill and dump valves Ethernet network up to 50 modules (Modbus IP) DIN rail mounting Environment: ROHS standard

After 47 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionary leak tester range : the F6 series including a compact leak tester F620, a weatherproof leak tester F610 and the F670 in its 19″3U industrial format. New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. And yet, inside can be found the latest leak testing technics and technology that will garantee you the fastest and most accurate leak testing cycle on the market. Automotive, domestic appliances, medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging Differential pressure decay leak measurement Large range of leak measurement (∆P) F.S.: 20Pa, 50 Pa, 500 Pa or 5000 Pa Mechanical or electronic regulator from vacuum to 20 bar 128 programs Setting on line (via USB) 2 languages (English + other one)

Without any doubt, the smallest high performance leak tester on the market. One of the main advantage is that our F28 Light module can be mounted close to the test part, ensuring the best measurement conditions. You can daisy chain up to 50 modules and supervise them with a touch screen panel + our user friendly interface : F28 light demo. Specially adapted for automatic and semi automatic test machines, the F28 Light has a full range of specifications at a very competitive price. Packaging, blister, watch, mobile phone, pneumatic and hydraulic fittings Differential pressure decay leak measurement Types of measurement: Direct mode / Sealed test components / Desensitized leak mode Smart pressure regulation without regulator – auto fill (optional) Electronic regulation (optional) Units: Pa, Pa/s, sccm Compact dimensions (overall (mm): h 141.5 x L 225 x D 97) Mechanical or electronic regulator from vacuum to 5 bar Integrated fill and dump valves

F28+: The new innovative tester, made by ATEQ, elevates the leak test to a whole new level of speed, flexibility and accuracy. You can easily supervise it with a touch-screen panel + our user friendly interface: winateq 300. Adapted for manual, semi-automatic and fulled automated leak testing, the F28+ has a full range of specifications at a very competititve price Automotive, domestic appliances, medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging… Differential pressure decay leak measurement: vacuum to 20 bar Multi-test leak tester 128 programs Fully integrated electronics and pneumatics Flexible communication format: Bar code reader, RS232, USB Date storage on internal memory or USB key

Handwheels & Knobs, or Moulded Handles & Metal Knobs as they can be known are a useful component for adjustment purposes, with the ability to operate basic machinery functions once installed. Coming in 3 main threaded styles, these being male, female and threaded through, you can rest assured that we have the best possible style for your particular use. All available on our website along with the ability to request free samples, check out our full selection of products today.

ProxATEX ATEX/IECEx Certified Temperature Controller – New Patented High Current Hazardous Area Controller This ATEX and IECEx certified controller is ideal for use with our Thermosafe, Faratherm or InteliHeat FlexiPlus products and other heating equipment installed in potentially explosive atmospheres. The device features Near Field Communication (NFC) which allows operators and site managers to set the key parameters of the device quickly and easily using pre-programmed cards. Simply hold the credit card sized NFC cards close to the front of the controller and the settings are instantly updated. This also makes the controller “Covid-secure”! BF400 Power Controller – Low cost solution for most installations Uniquely designed for use with the THERMOSAFE and FARATHERM Induction Heaters. Open loop control that is simple to install and use, ideal for most applications where a drum needs to be maintained at an operational temperature for a period of time.

Certified to EN1793 and for the highest DLr and DLa requirements. Additional wood concrete sound insulation structurally bonded to pre-cast panels for extremely high absorption levels.

High-temperature greases with high thermal stability and optimum wear protection. They are extremely media-resistant and mainly suited in bearings and conveyor rollers operating at high temperatures.

High Purity Turbo Yeast is an active dried alcohol yeast combined with a complete nutrient complex, designed to produce super clean spirit alcohol from fermentation up to 15% ABV. This is a specialist, low congener yeast strain which confers minimal fusel oils or other flavour-causing fermentation by-products. This Turbo Yeast can be used to ferment any fermentable sugar-based feedstock, but works best when using refined sugar substrates such as sucrose, glucose or enzymatically-converted grain. High Purity Turbo Yeast is recommend for use when producing alcohol for making clean-tasting spirits such as vodka and gin, particularly when high-tech distillation equipment is not being used.

TY24 is an active dried alcohol yeast combined with a complete nutrient complex, designed to ferment up to 14% ABV in 24 hours. This is an extremely vigorous distiller’s strain suitable for fermenting any sugar substrate, from pure sucrose or glucose to enzymatically-converted starch as well as other fermentable sugar sources such as molasses, thick sugar juice etc. The wash produced from fermentation using TY24 would normally be distilled for use as 96% potable ethanol, or spirit alcohol for making alcoholic beverages. For more information or samples please contact us on +44(0)151 356 5985 or enquiries@spl-int.com

New Upgraded 6D Mechanism Artificial Intelligence algorithm Heart Rate Detection Voice Control technology Zero Space & Zero Gravity HD 10.1 Inches Large Screen Operating System Biological Anti-Pitch System USB 5V/ 2.1A Fast Charging Ports Full Body 114 Airbags Massage & Heating Intelligent Height Detection 24 Automatic Programs

The audit process draws on the management requirements of the HSE's ACoP (L8) and HTM 04-01 & HTM 03-01 (where appropriate). If you are prosecuted for breach of health & safety law, and it is proved that you did not follow the relevant provisions of the Code, you will need to show that you have complied with the law in some other way or a Court will find you at fault.” A water safety audit is crucial to the development or refinement of any good risk management system & the control of Legionella. Our water hygiene audit will examine and verify the management systems you currently have in place & cover issues including: - Appointment of Responsible Persons' & associated staff - Roles, responsibilities & lines of communication - Risk assessment & re-assessment of compliance - Review of policy & procedures document(s) including records - Implementation of remedial works - Evidence of monitoring & performance of systems - Staff training

Combining specialist knowledge of engineering, building services & health & safety, to guide you in meeting your water hygiene compliance objectives. In the Autumn of 2015 guidance was issued for the role of Authorising Engineer [Water]. Guidance recommends that any Authorising Engineer [Water] should remain independent of the operational structure of an organisation. The Water Hygiene Centre can provide an AE [Water], who will act as your independent professional Legionella consultant, giving support & advice in accordance with relevant guidance. Your appointed AE [Water] will: - Provide an annual water safety audit - Attend your Water Safety Group, supporting & improving your on-going management of water hygiene risks - Undertake a review and update of your Written Scheme / Water Safety Plan - Routinely monitor your organisational performance - Assess & appraise members of your management team & make recommendations for their formal appointment - Provide training

Key & Asset Control Software allows you to add all of your staff, key and important information into one database, therefore allowing you to track all of your key movements in detail.

Block control board without the plain or numbered blocks The Block Control Board is also available to purchase individually without the magnetic blocks.

Water Safety Plan [WSP], defined in BS8680 as… ‘strategic plan which defines & documents the arrangements that are required for the safe use & management of all water systems together with all associated systems & equipment within each building or estate to prevent harm arising from all forms of exposure’. Depending on the type & size of your organisation the scope & content of the WSP will vary. The initial steps in the development of a WSP is understanding the water related risks, the need to have identified and assessed those water related risks within a building or across an entire estate. This baseline of the water risks allows the development of the associated processes to be defined, outlining applicable arrangements to ensure the safe use of, and management of the water systems and associated equipment initially identified.

The BioAim™ DMS 2004 is a portable hand held fogging system which allows the user to spray our biocide direct at specific areas or items. For example, it is extremely useful in kindergartens or clinical settings, where you may wish to target extra effort to decontaminate equipment or areas of intense use. The flexible hose enables the user to reach difficult areas and ensure that high risk surfaces are thoroughly treated.

Cordless rechargeable and convenient air and surface misting system. Simply remove from the charging station and point at areas to be sanitised. Delivers a light mist which decontaminates ‘hot spots’ and the air around them, within minutes. Works for up to 30 minutes on a single charge. Perfect for regular and frequent sanitising of work stations, classrooms, retail counters and vehicles.

Easy to use and carry ‘mist in a bottle’ 330 ml spray, in a refillable container, is a 3-in-1 product suitable for sanitising skin, surfaces and the air. Proven to kill up to 99.9999% of all types of germs, including bacteria, mycobacteria, viruses, spores, yeasts and moulds, yet is harmless to people, plants animals and the environment. Perfect product for sanitising work stations, personal spaces, inside vehicles, kitchens, bathrooms, all surfaces and the air. Only 30 seconds contact time ensures full product efficacy.Compliant to British and EU standards: EN 1040, EN 1275, EN 1276, EN 13697, EN 14476, EN 16777.InfectionGard Sanitising Spray contains no toxic chemicals, no alcohol and is non-irritating. It is kind to skin and has been shown to improve psoriasis, eczema, dermatitis, scabies and most bacterial skin infections.

InfectionGard Sanitising Spray refills don’t just save you money, they help to save on plastic waste too. Ideal for topping up your ‘mist in a bottle’ spraying device, InfectionGard Battery mister or for use with our InfectionGard autoMist whole room misting system.

RNA offer as part of a total package the design and manufacture of bespoke handling systems which include vision systems and pick & place handling units often combined with vibratory bowl feeders. From a vision inspection system for checking out of tolerance components, counting systems for bagging machines, utilising the latest pneumatic and electric linear slide systems RNA can supply a system to move manipulate and handle your components.

Our control boxes vary in size and complexity from simple plastic (Polycarbonate or ABS) enclosures incorporating printed circuit boards (PCB’s) to much larger sheet metal or stainless steel enclosures containing far more complicated components like inverters, contactors, transformers, relays, timers and power supply units(PSU’s).

We manufacture high quality and cost-effective control panels for many of the world’s largest sectors and brands. These are also used by many niche business or start-ups looking for a reliable and experienced manufacturing partner to value engineer panels into their overall designs.

The Proguard Eazi-Zip door is ideal for creating a temporary doorway through polythene walling. Featuring a self-adhesive double zipper, the door affixes to any polythene screening to create a sealable opening. They are perfect for allowing easy access to a dust containment area. The Eazi-Zip door can be installed in a matter of minutes by simply sticking the two zips side by side approximately 1 metre apart then use a knife to cut down the back of the screening material. The doors are suitable for use with screening props and polythene sheeting to create a temporary screen (sold separately). Size: 2.1m high

The motor control unit for 48V drives was specially developed for use in light electric vehicles. With a continuous output of 6kW and a peak power of up to 12kW, the Emerge 6000 accelerates confidently through everyday life. Thanks to the automatic teach-in function, the controller forms a powerful unit with the motor within a very short time. Our field-oriented control system with highly efficient control algorithms then ensures a unique driving experience.

Herschel iQ is a modular property control system. Start with a basic pack to heat just one room and add further packs and the iQ link system to control your whole home from the convenience of a tablet or PC.