Typical products - Import export

Other information E3.10 Inner height hi: 10 mm Inner widths Bi: 20 - 60 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®. E3.15 Inner height hi: 15 mm Inner widths Bi: 20 - 60 mm bending radii R: 32 - 75 mm Pitch: 16,7 mm E-Chain®. E3.22 Inner height hi: 22 mm Inner widths Bi: 20 - 60 mm bending radii R: 44 - 75 mm Pitch: 16,7 mm E-Chain®. iF -Design Award 2005 IPA classification - Report IG0704-400:: ISO Class 1, according to DIN EN ISO 14644-1 for system E3, Series E3.15.040.075.0 at v = 0,5 m/s, 1 m/s, 2 m/s Other information E3.10 Inner height hi: 10 mm Inner widths Bi: 20 - 60 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®. E3.15 Inner height hi: 15 mm Inner widths Bi: 20 - 60 mm bending radii R: 32 - 75 mm Pitch: 16,7 mm E-Chain®. E3.22 Inner height hi: 22 mm Inner widths Bi: 20 - 60 mm bending radii R: 44 - 75 mm Pitch: 16,7 mm E-Chain®. E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Opening and closing of the E-Chain®. Interior separation and strain reliefs. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E3 system E3: System for highly dynamic applications The cycle times are always shorter in the automation, whereas the requirements in noise reduction, service life, vibration dampening are always higher. For this wide area of small E-Chain®, igus® now introduces the E3 system product range that completely caters to these requirements: Extremely low noise operation (max. 38 dB(A)). The resilient element replaces pins and bores as fastener Modular chain made of three elements Cost-efficient crossbar and separator "on the band" Quicker and easier access to cables by the zipper system Good stability through stable, interlocked links Easy to shorten or lengthen Ideal for flat cables Accessories: Separators, integrated strain reliefs, mounting brackets Typical industrial sectors and applications Production and processing of semiconductors Optics Automatic insertion machines Materials handling technology Measuring technology Printer and plotter Clean room application General mechanical engineering iF -Design Award 2005 IPA classification - Report IG0704-400:: ISO Class 1, according to DIN EN ISO 14644-1 for system E3, Series E3.15.040.075.0 at v = 0,5 m/s, 1 m/s, 2 m/s

Activated Carbon is the general name assigned for a group of porous carbons. The appearance of activated Carbon depends considerably on the process used for the activation of Carbon. The product is typically charcoal black with varying mesh sizes.

Activated Carbon is the general name assigned for a group of porous carbons. The appearance of activated Carbon depends considerably on the process used for the activation of Carbon. The product is typically charcoal black with varying mesh sizes.

Activated Carbon is the general name assigned for a group of porous carbons. The appearance of activated Carbon depends considerably on the process used for the activation of Carbon. The product is typically charcoal black with varying mesh sizes.

Activated Carbon is the general name assigned for a group of porous carbons. The appearance of activated Carbon depends considerably on the process used for the activation of Carbon. The product is typically charcoal black with varying mesh sizes.

For protecting and preserving your goods, Side gusseted bags of Gordopack is your best option. Side gusseted bags have become an indispensable part of everyday life. Gordopack side gusseted bags have proven themselves in many ways as packaging and means of transport and are therefore preferred by customers from industry, trade and commerce. It goes without saying that we manufacture all side fold bags according to the customer's specific requirements, for example with technical additives such as antistatic agents, UV stabilisers, UV absorbers and much more. And of course, our products meet the legal requirements, such as those stipulated in the food industry. Typical products are shrink hoods and carton and box inlays. Product can range from HDPE/ MDPE/ LDPE/ PCR with seam interruption, perforated on roll or loose in cartons, needled, with antistatic agent, UV-stabilizer/absorber, symbol marking, Corona treatment and in various colours.

A chemical reactor functions as an enclosed vessel where chemical reactions occur. It's crucial for process designers to ensure the reaction proceeds efficiently toward the desired product, maximizing yield while minimizing costs associated with procurement and operation. Operational expenses encompass factors like energy input and disposal, raw material costs, labor, and other associated charges. Typically, reactants and products within the reactor are in fluid form, either gases or liquids. Continuous reactors maintain a constant operational state, while batch reactors undergo transient operation. Transient operation occurs when a reactor is activated for the first time or following a shutdown, with critical process variables fluctuating over time.

The extremely versatile LIST Single Shaft KneaderReactors are in successful operation in a wide range of industrial-scale process applications, e.g. Crystallization Drying Dissolving Main Evaporation Devolatilization Torrefaction and others The inovative design features a single mixing shaft whose kneading elements intermesh with counter-hooks attached to process housing providing a self-cleaning effect. The rotation speed and geometry of the mixing shaft and kneading elements are customized designed to optimize the prozess efficiency. With an operating volume up to 20 m3, it provides the capacity to handle largest production capacities. Typical design specifications: Volume: 7 … 20´000 l Operating pressure: 0.001 ... 16.0 ... 100 bar (a) Operating temperature: -100 ... +400 °C Operation mode: Batch or Continuous Installed Power: ... 2.5 MW Torque: ... 500 kNm Drive: Hydraulic drive units or electric motor with or without frequency converter Shaft seal: Stuffing box or...

Wax release agents can be produced in a wide variety of compositions and qualities. These industrial products are typically used as release layers in boat building, as shoe soles, bumpers, dashboards or as PU-foam. You can find detailed information about our range of products on the website www.oskars.biz

Burrs are splinters, fraying, or edges that occur during machining processes. Tyrolit tools make removing these easy. Our nonwoven products are ideal for finer deburring work on materials like stainless steel, nonferrous metals, titanium, and high-alloy steels. Applications include surgical instruments, turbine construction, products for the chemical and food industries, design objects, and more. For coarser deburring and rough grinding, flap or fiber discs are typically used. Tyrolit's product range for deburring and finishing surfaces is extensive. It includes various non-woven products like discs, rolls, belts, and points for use on steel, stainless steel, nonferrous metals, and plastic. Our high-quality polishing program, featuring first-class discs for angle grinders and different polishing pastes, is perfect for removing final scratches. Tyrolit offers tools for every finishing application.

Classic solid wood dressing table “Evrica” combines luxury workmanship, beauty and design provocation in the production of the presented dressing table. It is a typical representative of the production, but also stands out among the others in the company’s catalog. The model is among the most preferred products of our company. It is characterized by exquisite design and stylish vision. In addition, it has an invaluable advantage over other similar models that you will find on the market — it has an artistic vision and is made of solid wood. The product with dimensions according to catalog 860/750/345 is a combination of artistic lines and accents. The solid wood dressing table has a rectangular top on a base with non standard curves. The legs of the product narrow to the floor and the front ones have a fine embossed decoration. They are united by an additional countertop with a non standard shape.

The HONSEL HEADLESS blind rivet nut is a typical example of product development at Honsel. Originally designed and produced as a special solution, the nut has been incorporated directly into the standard range due to the great interest shown. The blind rivet nut is set with a projection of 0 mm in smooth holes, without countersinking. The elimination of the "countersinking" process at the hole offers enormous savings potential. Thanks to the 0 mm protrusion, components can be assembled without interfering edges or can slide over each other. . Pre-assembled components are easier to install. . no more interfering edges . no gap between the components due to protruding heads . no more beading or countersinking required for a head - therefore less tooling, fewer production steps and less material waste

R600a is the common name for high purity isobutane (C4H10I suitable for use in the refrigeration and air conditioning industry. It is also known as CARE® 10. The product typically is at least 99.5% pure with minimal levels of critical impurities including moisture and ursaturated hydrocarbons. This makes it ideal for use in all types of refrigeration systems.R-600a advantages; Zero ozone depletion potential. Very low glooal warming potential (<4). High thermodynamic properties leading to high energy efficiency. Good compatibility with components. Low charges allowing smaller heat exchangers and piping dimensions.UseR600a has a number of applications. It is most suited to high and medium temperature applications. The most common applications are using in domestic refrigeration

Chemical appearance: Activated Carbon is the general name assigned for a group of porous carbons. The appearance of activated Carbon depends considerably on the process used for the activation of Carbon. The product is typically charcoal black with varying mesh sizes. Chemical application and strength: The primary application of granular activated carbon mesh is evident in the process of cyanidation. Cyanidation is the metallurgical process for mining gold from ore that contains cyanide. The use of physical activation involves hot gases either through carbonization or oxidation. Granular activated Carbon has an appearance just like the name indicates with the higher surface area for adsorption. Activated Carbon is produced from sources enriched in Carbon. Therefore, the surface structure of activated Carbon is very porous, and it also has a vast surface area.

Chemical appearance: Activated Carbon is the general name assigned for a group of porous carbons. The appearance of activated Carbon depends considerably on the process used for the activation of Carbon. The product is typically charcoal black with varying mesh sizes. Chemical application and strength: The primary application of granular activated carbon mesh is evident in the process of cyanidation. Cyanidation is the metallurgical process for mining gold from ore that contains cyanide. The use of physical activation involves hot gases either through carbonization or oxidation. Granular activated Carbon has an appearance just like the name indicates with the higher surface area for adsorption. Activated Carbon is produced from sources enriched in Carbon. Therefore, the surface structure of activated Carbon is very porous, and it also has a vast surface area.

ECO was born from the need to offer high quality standards and a low cost. Perfect for those who want great results in the kitchen without sacrificing quality and attention to detail, typical of Rossofuoco products. A very successful oven that satisfies every need in the kitchen and once tried it is impossible to part with. The built-in version of ECO is also of great quality; practical, with essential lines, it maintains all the characteristics of the corresponding outdoor version; perfect for those who like to obtain excellent results. Painted structure. Trolley, fixed support, barbecue, side work surface, front work surface, additional refractory plate, bread-pizza shovel, additional grills and trays.

ECO was born from the need to offer high quality standards and a low cost. Perfect for those who want great results in the kitchen without sacrificing quality and attention to detail, typical of Rossofuoco products. A very successful oven that satisfies every need in the kitchen and once tried it is impossible to part with. The built-in version of ECO is also of great quality; practical, with essential lines, it maintains all the characteristics of the corresponding outdoor version; perfect for those who like to obtain excellent results. Struttura verniciata, Tetto verniciato rosso.Fixed support, barbecue, side work surface, additional refractory plate, bread and pizza peel, additional grills and trays

“Bending” is a manufacturing process that produces a V-shape, U-shape, or channel shape along a straight axis in plastic materials, most commonly sheet metal. Commonly used equipment includes box and cup brakes, press brakes, and other specialised machine presses. Typical products that are produced in this way are boxes, such as electrical enclosures and rectangular ducts. Bending sheet steel The combination of modern presses, advanced matrix, stamps and the experience of our employees provides excellent results in the form of professionally performed artistic processing of various sheets. We bend sheets quickly and extremely precisely, and thanks to the fact that the process is fully repeatable and automatic, we can undertake even very large orders. The maximum pressure of our machines is as much as 200 tons, thanks to which we can undertake artistic processing of materials with a thickness of 6 mm over a length of 3 meters.

Durus S500 is proving increasingly popular with designers, contractors and project owners. This synthetic macro-fibre has shown to be a valid alternative to conventional steel fibre reinforcement. With no need to change existing designs, a concrete mix using steel fibres can be replaced by a mix containing Durus S500 macro fibres. The workability will remain unchanged and often even be improved. Typical applications include the production of concrete tunnel segments and other precast concrete elements. The use of Durus S500 instead of steel fibres eliminates any risk of injuries to manufacturing operatives during dosing, de-moulding and handling of precast elements. Compliance with health & safety requirements during the production process and on the construction site are thus greatly improved.

Durus S500 is proving increasingly popular with designers, contractors and project owners. This synthetic macro-fibre has shown to be a valid alternative to conventional steel fibre reinforcement. With no need to change existing designs, a concrete mix using steel fibres can be replaced by a mix containing Durus S500 macro fibres. The workability will remain unchanged and often even be improved. Typical applications include the production of concrete tunnel segments and other precast concrete elements. The use of Durus S500 instead of steel fibres eliminates any risk of injuries to manufacturing operatives during dosing, de-moulding and handling of precast elements. Compliance with health & safety requirements during the production process and on the construction site are thus greatly improved.

Solcut QLB2 is a versatile solution suitable for a broad spectrum of applications. Whether you’re engaged in brass and aluminum machining within large transfer systems or tackling steel machining in smaller, single sump machines, Solcut QLB2 has you covered. This semi-synthetic biostable machining and grinding fluid forms transparent emulsions, which can become semi-translucent when used with hard water. Solcut QLB2 brings together the cleanliness and detergency typically associated with synthetic products while avoiding the sticky residues often encountered with such alternatives. It’s a reliable choice for various machining operations.

The purity of isolated CBD is in range typically 9899,5%. The purity of isolated CBG is in range typically 9699%. The product can be delivered in powder or fine crystal form. The powder form is white, and the crystal form is white to light yellow. The purity of >99,5% can be provided upon request.

The new Made in Italy ERREBI dispenser takes up little space, can be placed anywhere, is discreet and functional. It can be used to provide kitchen towels. It contains sheets of V-folded paper. This folding is ideal in the kitchen and bathroom, but also in offices. The advantage of choosing Paperquick is that it is ready to use and easy to take with one hand. Why choose Paperquick dispenser? Because the structure is made of non-toxic plastic and is easily transportable: you can place it where you need it and change its location whenever you need it. The paper inserted in Paperquick is made of mixed cellulose 80/20, also in this case the towels are characterized by the high product quality typical of ERREBI PAPER items.

The wet product fed through the inlet nozzle is picked up by the rotor blades, applied on the hot wall and simultaneously conveyed towards the outlet nozzle at the opposite end of the body. The generated vapours are streaming counter-currently to the product flow and are leaving the dryer close to the feed nozzle. Evaporating and conveying capacity are adapted by the right rotor blade arrangement. Entrained particles from the dry zone are removed in the wet zone. Moisture levels of less than 1 % can be achieved. The residence time of the product is typically between 5 and 15 minutes. The outstanding heat transfer rate for hot solid products enables cooling of large amounts of solids in a compact machine compared to usually used cooling screws and without cooling air.In product melting like the melting of urea, the particles are heated up and molten inside the dryer. The melt can be mixed with other liquid and solid additives to improve the properties of the final products.

Appearance Dry seed Forma / Shape Reniforme abolada / Abolated reniform Smell / Odor Characteristic of dry grain. and I clean. Free of odors of humidity, fermentation, rancidity, mold, putrefaction or any other strange odor. / Typical of dry grain. and I clean. Free of musty, fermentation, rancid, moldy, rotting odors or any other foreign odour. Color Typical Black Flavor/Flavor Product characteristic. / Typical of the product. Texture / Texture Dura / Hard Baked appearance It should not be hard or overcooked in the established cooking time of 2 hours. 90 min. / It should not be hard or overcooked in the established cooking time of 2 hours. at 90 min.

Industrial Heating Oil (IHO) is specifically made for commercial boiler applications for heat generation and is lower cost alternative to using diesel to heat your business. Load sizes start at 3000 litres through to a full vehicle load of 35,000 litres and is available nationwide. These products are typically several pence per litre under the price of Class A2 Gas Oil so there is huge potential for savings to be had, especially on the larger loads.

"Combi" tools allow different technologies to be combined in a single step (in one tool) for more efficient plastic component production. Typical technologies applied in combined processes (depending on the requirements) are foaming, forming, laminating, edge folding, punching and joining. These processes allow different materials and material combinations to be used. "Combi" tools enable a very fast and cost-effective production process with minimized space requirements. Based on their longtime expertise and completion of numerous serial projects, FRIMO is able to supply optimized tooling solutions that perfectly meet the product and customer requirements. These range from small tools to special tools for large components for a nearly unlimited range of plastic applications. Our tools are available in steel or cast steel, as well as in aluminum, cast aluminum or nickel shells. For special applications, FRIMO also offers tools with interchangeable inserts, allowing the most efficient

Certain plastic encapsulated surface mount devices (SMDs), if not handled properly, can incur damage during the solder reflow attachment process to printed circuit boards (PCBs). In order to prevent damages, the moisture sensitive product is typically baked before packing. After baking, the product is placed inside a DryPack bag along with predetermined amount of desiccant and a humidity sensitive indicator card (refer to JEDEC JSTD033C). The vacuum sealed bag is labeled and placed in a pizza box carton.

Ideal for all industrial cleaning tasks, from drying hands to clean machinery or wiping surfaces. Could be used in combination with water, detergents, or solvents without facing deterioration performance’s. Stronger than typical paper product, won’t shred and tear while working with tools and parts. 55 gM2 – Polyester/Wood pulp fibers