Typical products - Import export

Other information E3.10 Inner height hi: 10 mm Inner widths Bi: 20 - 60 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®. E3.15 Inner height hi: 15 mm Inner widths Bi: 20 - 60 mm bending radii R: 32 - 75 mm Pitch: 16,7 mm E-Chain®. E3.22 Inner height hi: 22 mm Inner widths Bi: 20 - 60 mm bending radii R: 44 - 75 mm Pitch: 16,7 mm E-Chain®. iF -Design Award 2005 IPA classification - Report IG0704-400:: ISO Class 1, according to DIN EN ISO 14644-1 for system E3, Series E3.15.040.075.0 at v = 0,5 m/s, 1 m/s, 2 m/s Other information E3.10 Inner height hi: 10 mm Inner widths Bi: 20 - 60 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®. E3.15 Inner height hi: 15 mm Inner widths Bi: 20 - 60 mm bending radii R: 32 - 75 mm Pitch: 16,7 mm E-Chain®. E3.22 Inner height hi: 22 mm Inner widths Bi: 20 - 60 mm bending radii R: 44 - 75 mm Pitch: 16,7 mm E-Chain®. E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Opening and closing of the E-Chain®. Interior separation and strain reliefs. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E3 system E3: System for highly dynamic applications The cycle times are always shorter in the automation, whereas the requirements in noise reduction, service life, vibration dampening are always higher. For this wide area of small E-Chain®, igus® now introduces the E3 system product range that completely caters to these requirements: Extremely low noise operation (max. 38 dB(A)). The resilient element replaces pins and bores as fastener Modular chain made of three elements Cost-efficient crossbar and separator "on the band" Quicker and easier access to cables by the zipper system Good stability through stable, interlocked links Easy to shorten or lengthen Ideal for flat cables Accessories: Separators, integrated strain reliefs, mounting brackets Typical industrial sectors and applications Production and processing of semiconductors Optics Automatic insertion machines Materials handling technology Measuring technology Printer and plotter Clean room application General mechanical engineering iF -Design Award 2005 IPA classification - Report IG0704-400:: ISO Class 1, according to DIN EN ISO 14644-1 for system E3, Series E3.15.040.075.0 at v = 0,5 m/s, 1 m/s, 2 m/s

For protecting and preserving your goods, Side gusseted bags of Gordopack is your best option. Side gusseted bags have become an indispensable part of everyday life. Gordopack side gusseted bags have proven themselves in many ways as packaging and means of transport and are therefore preferred by customers from industry, trade and commerce. It goes without saying that we manufacture all side fold bags according to the customer's specific requirements, for example with technical additives such as antistatic agents, UV stabilisers, UV absorbers and much more. And of course, our products meet the legal requirements, such as those stipulated in the food industry. Typical products are shrink hoods and carton and box inlays. Product can range from HDPE/ MDPE/ LDPE/ PCR with seam interruption, perforated on roll or loose in cartons, needled, with antistatic agent, UV-stabilizer/absorber, symbol marking, Corona treatment and in various colours.

Wax release agents can be produced in a wide variety of compositions and qualities. These industrial products are typically used as release layers in boat building, as shoe soles, bumpers, dashboards or as PU-foam. You can find detailed information about our range of products on the website www.oskars.biz

The HONSEL HEADLESS blind rivet nut is a typical example of product development at Honsel. Originally designed and produced as a special solution, the nut has been incorporated directly into the standard range due to the great interest shown. The blind rivet nut is set with a projection of 0 mm in smooth holes, without countersinking. The elimination of the "countersinking" process at the hole offers enormous savings potential. Thanks to the 0 mm protrusion, components can be assembled without interfering edges or can slide over each other. . Pre-assembled components are easier to install. . no more interfering edges . no gap between the components due to protruding heads . no more beading or countersinking required for a head - therefore less tooling, fewer production steps and less material waste

Right Guard is a popular brand of personal care products, particularly known for its line of antiperspirants and deodorants. The brand was first introduced in the United States in the 1960s and has since gained a strong reputation for its effectiveness in providing long-lasting protection against sweat and odor. Right Guard products are designed to keep individuals feeling fresh and confident throughout the day, even during physical activities or high-stress situations. The brand offers a variety of formulations, including aerosol sprays, roll-ons, and sticks, catering to different preferences and needs. Right Guard products typically contain active ingredients such as aluminum chlorohydrate or aluminum zirconium tetrachlorohydrex gly, which work by temporarily blocking sweat glands to reduce perspiration. With its reliable performance and wide range of options, Right Guard has become a trusted choice for many individuals seeking effective underarm protection.

The wet product fed through the inlet nozzle is picked up by the rotor blades, applied on the hot wall and simultaneously conveyed towards the outlet nozzle at the opposite end of the body. The generated vapours are streaming counter-currently to the product flow and are leaving the dryer close to the feed nozzle. Evaporating and conveying capacity are adapted by the right rotor blade arrangement. Entrained particles from the dry zone are removed in the wet zone. Moisture levels of less than 1 % can be achieved. The residence time of the product is typically between 5 and 15 minutes. The outstanding heat transfer rate for hot solid products enables cooling of large amounts of solids in a compact machine compared to usually used cooling screws and without cooling air.In product melting like the melting of urea, the particles are heated up and molten inside the dryer. The melt can be mixed with other liquid and solid additives to improve the properties of the final products.

"Combi" tools allow different technologies to be combined in a single step (in one tool) for more efficient plastic component production. Typical technologies applied in combined processes (depending on the requirements) are foaming, forming, laminating, edge folding, punching and joining. These processes allow different materials and material combinations to be used. "Combi" tools enable a very fast and cost-effective production process with minimized space requirements. Based on their longtime expertise and completion of numerous serial projects, FRIMO is able to supply optimized tooling solutions that perfectly meet the product and customer requirements. These range from small tools to special tools for large components for a nearly unlimited range of plastic applications. Our tools are available in steel or cast steel, as well as in aluminum, cast aluminum or nickel shells. For special applications, FRIMO also offers tools with interchangeable inserts, allowing the most efficient

Certain plastic encapsulated surface mount devices (SMDs), if not handled properly, can incur damage during the solder reflow attachment process to printed circuit boards (PCBs). In order to prevent damages, the moisture sensitive product is typically baked before packing. After baking, the product is placed inside a DryPack bag along with predetermined amount of desiccant and a humidity sensitive indicator card (refer to JEDEC JSTD033C). The vacuum sealed bag is labeled and placed in a pizza box carton.

This Matcha quality has an unbeatable price-performance ratio and gives every preparation the typical Matcha taste and color. Product Description: Product: Organic Matcha Green Tea Powder Quality: Culinary Quality – for Food & Drinks Purpose: Suitable for cooking and baking, for refining food and preparing cold & hot drinks Sensors: Yellowish green, typical green tea taste. Packaging Options: A12-10059 – Cardboard Can 30g MatchaMagic Label-MOQ: 12 Cans Private- & White-Label MOQ: 120 Cans A12-10060 – Pouch 100g MatchaMagic Label-MOQ: 10 Pouches Private- & White-Label MOQ: 100 Pouches A12-10169 – Cardboard Can 100g MatchaMagic Label-MOQ: 6 Cans Private- & White-Label MOQ: 120 Cans Certificates: JAS-Organic, EG-ÖKO Analyses: Pesticide, Radioactivity, Heavy Metals and Microbiology

Wipe-on applicator LA-WO for small labels (ALX 92x): • Wipe-on applicator for applying labels onto the side of moving products • Typical applications: paper reams, doors, windows, flooring • Ideal for applications with high product speed

Small Quantities, Big Effect: The MIXACO laboratory container mixer is ideal for mixing the small quantities typically required for product development or the monitoring of industrial production. Despite its compact dimensions, this model offers all the advantages of a large container mixer. The container has a volume of 6 or 12 liters, so transport is particularly easy in a laboratory environment. Since all common mixing processes can be realized by using the corresponding tools and options, the MIXACO laboratory mixer is an optimum solution for the development of new recipes that need to be transferred rapidly to industrial manufacturing. All Benefits at a Glance •Compact design and easy handling for laboratory use •Innovative tool design for a variety of mixing tasks •Upscaling for production purposes •Compact mixing containers with 6- or 12-liter capacity •ATEX version available •Low energy consumption

Exposed linear encoders are designed for use on machines and installations that require high accuracy of the measured value. Typical applications include: Measuring and production equipment in the semiconductor industry PCB assembly machines Ultra-precision machines High-accuracy machine tools Measuring machines and comparators, measuring microscopes, and other precision measuring devices Direct drives Our standard encoders are suitable for use in a low or medium vacuum. Encoders used for applications in a high or ultrahigh vacuum need to fulfill special requirements. Design and materials used have to be specially adapted for it. For more information, refer to the Technical Information document Linear Encoders for Vacuum Technology. The following exposed linear encoders are specially adapted for use in high and ultrahigh vacuum environments. • High vacuum: LIP 481 V and LIF 481 V • High vacuum: LIC 4113 V and LIC 4193 V • Ultrahigh vacuum: LIP 481 U

This group of polyurethane products typically features a lightweight foam core with a compact, dense skin – the so-called integral skin. Thanks to these properties, PU soft- / semi-rigid integral skin foams cover a broad range of applications such as steering wheels, shifter knobs, arm rests, protective pads, floor mats and operating room rests. Typical properties Moulded part density of 220–600 kg/m³ Shore A hardness of 10–90 Available foaming agents: pentane, hydrofluorocarbons (such as 365/227mfc) and water Good abrasion resistance Special formulations and versions Viscoelastic Anti-static Flame protection formulations Automotive: FMVSS 302 Rail vehicle construction: DIN 5510 (S4, SR2, ST2), EU TL 45545 Aircraft construction: ABD 0031, FAR 25.853 Construction industry: DIN 4102 B2 Recreation industry: M2, UNI 9175/87 (= CSE 4/83): class 1.IM, BS 5852 crib 5

Individual textile bellows with and without protective lamellas in almost any desired shape and extent offer a cost-effective and flexible machine or guideway protection. A typical standard application for these products is the cover of linear guides or flat guides. Various synchronous mechanisms and damping variants are available for highly dynamic applications.