Welding equipment - Import export

Positioner is designed in order to change the piece’s position, tied onto it, to the best and weld. It gives movement opportunity on two independent lines which are rotating and angular positioning. Positioners can be fixed to the ground according to weight and center of gravity of the work piece. Flange rotating speed can be sensitively adjusted with the control. Optionally it can be adapted with Column-bom system as to work synchronized. Rotator and positioning motors are equipped with thermic protector separately.

Aluminum is a light, thin metal that is very commonly used in welding shops. With this metal, welding must be done at low temperatures, otherwise pores will form in your materials. Aluminum is highly reactive, so it forms an oxide layer when exposed to air. This oxide is a barrier to welding. Before welding you need to remove the oxide layer using a wire brush. Each different type of weld requires different equipment and techniques, but when you apply everything involved, your aluminum welds look clean and smooth and are very durable.

Pallet dolly (Tugger trains) have a robust welded steel construction and are equipped with 4 catch corners. The surface of the trolleys is galvanized or powder-coated, has permanent surface protection and is impact and scratch resistant Swivel and fixed castors: polyurethane tires, hubs with deep groove ball bearings, brakes on the swivel castors, in accordance with the European standard EN 1757-3. Housing galvanized. Standard wheels for medium loads. Quiet running, spring-loaded drawbar.

Pallet dolly (Tugger trains) have a robust welded steel construction and are equipped with 4 catch corners. The surface of the trolleys is galvanized or powder-coated, has permanent surface protection and is impact and scratch resistant Swivel and fixed castors: polyurethane tires, hubs with deep groove ball bearings, brakes on the swivel castors, in accordance with the European standard EN 1757-3. Housing galvanized. Standard wheels for medium loads. Quiet running, spring-loaded drawbar.

Fit-Up systems shortens the big diametric and heavy pieces’ montage period in cylindrical piece fabrication and reduces the need of crane and operator. Fit-Up systems basically consist of 2 main rotator teams. With the fixed rotator system, pieces’ heights towards each other are adjusted while rotator amount increases according to piece tonnage. Other rotator systems are mobile and as it appends to the piece it moves forward and basically make the movement of the piece’s rotating movement. With the help of column-bom which is the source of montaged pieces on Fit-up systems, it can be finished quickly while saving man-hour. In Fit-up system basically; besides the fixed rotator set that adjusts montage and heights it contains 2 motorized and 1 wanderer rotator systems.

Rotators are resistant to severe working conditions and are designed to rotate work pieces weighing 5 to 150 tons. It enables the cylindrical parts weld sensitively by rotating clockwise or anticlockwise. In line with customer’s demanded diameter and tonnages, its production can be made auto regulative or conventionally. Features -Through polyurethane coated wheels rotation quakes and uploading hitting are absorbed during welding. -In the applications requiring high temperature and major load, featured steel wheels can be used as well. -Wheels possess self-adjusting feature for small or big diameters. This adjustment can be made with ball screw or by hand optionally. -For the manual usage, digital control or analog entries can be integrated to Column Bom systems. -Sensitive rotation with low gaped reducer -Synchronised working feature -Power transmission with flat gears

-Dust protected strong mechanical structure -Feature of positioning welding head on 1,2 or 3 lines -Feature of oscillation on 1, 2 or 3 lines -Enable to work on different axis without mechanical adjustment -Enable to be used in Submerged,Inert gas or TIG -Enable to integrated with automations systems -“OLED” screen which all the parameters can be seen.

It’s designed upon you weld cylindrical, conical and rectangle shaped bended frameworks and in shape of flat slab metal sheet and plaque linearly. Frameworks that are between 200-3000 mm diameters can be welded on different types of machines easily. Its production can be made from the length of 0.5 meter to 4 meters. Upon customer demand the length can be increased. As to application method, TIG, MIG and submerged welds can be adapted. Materials’ like boiler, thermosiphon, solar power boilers, cooling tanks, natural gas funnels, lpg tubes etc., height welds are made on this machine.

Turn Table, precisely provide to welding by turning clockwise or counterclockwise of parts connected to it horizontally. It also enable movement in the rotation axis. . The work table is operated with a T-slot turntable to ensure that the workpieces are fully fixed to the work table. It is designed with the aim of increasing efficiency, eliminating the need for welding in difficult positions and considering ergonomics of employees.

The Frame Welding Machine is made of welded parts of different sizes and is designed to obtain the desired special H profiles. The machine body and the welding heads are fixed and the workpiece provide to be welded on both sides of the part to be welded by moving by means of driven conveyors. The hydraulic cylinders in the system provide the positioning of the H profile placing and fixing during welding.The system has adjustable backrests and accessories for the roofing of the conveyor group.The system has a hydraulic piston loading unit. The system might turn beam 90 degree with maximum weight and maximum dimensions by means of chain or mechanical structure.

EKO circular welding systems are designed for circular pieces’ integration with various welding methods in different positions. It appeals to a wide usage area in which all of the welding techs single and multipass welding tig, mig/mag and submerged welds can be used. It is used in environmental and linear welding of materials like circular formed, boiler, thermosiphon, hydraulic cylinder, conveyor roller, conveyor wheel, solar power boilers etc. It increases output and gain with the savings of materials and time. Upon request, production is made on different diameter, height and features

There are hydraulic pressing clamps in the fixture equipment of system. The workpiece is both made spot welding by means of clamps and prevented distortion due to heat during welding. Separate control lever is used as to be put to rear of piston for each piston.Also there is a pressure relief valve on each control lever. Thanks to pressure relief valves the critical pressure is brought to the desired pressure and the compression of the material in desired strength may be achieved A lock valve is connected to each hydraulic cylinder after the tightening process and during the welding operation, the material is prevented from being retracted and opened due to heat input. Reverse deflexion may be done on the frame thanks to the control units in the clamp mechanisms. 1 inert gas arc welding machine will be used for spot welding process.( it will be supplied by the purchaser)

PRODUCT INFORMATION This machine is ideal for the single corner welding of PVC profiles between 30°- 180°. Enable the welding of all angles between 30°-180°infinitely adjustable All parameters such as melting and welding time, welding pressure are set independently Automatically start and finish the welding cycle Adjusting the heat between 0-300°C by means of the electronic thermostat Smooth welding operations for long profiles by means of rotating support arms Maintenance friendly, for example cleaning of the heater plate and changing of the Teflon is very easy by means of quick change system Practical adjustment of standardl (2 mm) or seamless (0.2 mm) welding options manually Standard equipped with height adjustable profile support arms on both side Clamping the profiles separately via foot pedal Saving of time by means of practical mold change feature Portable machine stand OPTIONAL ACCESSORIES Machine according to the profile height of 165 mm

PLUSHINE SERIES STAINLESS HOSPITAL EQUIPMENT & SYSTEM ACCESSORIES System Accessories for optimizing details A CSSD or TSSU can never be effective without having supporting tools with decent quality. TBT offer PLUSHINE series stainless equipments and system accessories in order to offer you a complete solution combined with the other solution provided. Made of AISI 304 stainless steel stainless equipments are welded with highest quality finishing for combining durability with aesthetics. Proper materials like aluminium or high grade plastics are used to increase the life time of every product. PLUSHINE series is designed to manufacture happiness for you. •Instrument tables •Surgical scrub sinks •Trolleys •Workstations •Instrument cleaning sinks •Cleaning sinks with ultrasonic cleaner •Containers •Baskets •Manual trolley washing stations

COMET Early Streamer Emission (ESE) lightning terminal can anticipate all other elements and items within its protectable range according to its protection level radius by intercepting the lightning strikes and conducting these strikes into the earth ground through the safest and projected ways. COMET ESE Terminal work as to principle of creating IONs by its internal ION GENERATION channels. This structure itself allows the terminal to conduct the high voltage lightning strikes to the earthing system then to the earth at the safest way.

ZERU Early Streamer Emission (ESE) lightning terminal can anticipate all other elements and items within its protectable range according to its protection level radius by intercepting the lightning strikes and conducting these strikes into the earth ground through the safest and projected ways. ZERU ESE Terminal work as to principle of creating IONs by its internal ION GENERATION channels. This structure itself allows the terminal to conduct the high voltage lightning strikes to the earthing system then to the earth at the safest way.

HELIA Early Streamer Emission (ESE) lightning terminal can anticipate all other elements and items within its protectable range according to its protection level radius by intercepting the lightning strikes and conducting these strikes into the earth ground through the safest and projected ways. HELIA ESE Terminal work as to principle of creating IONs by its internal ION GENERATION channels. This structure itself allows the terminal to conduct the high voltage lightning strikes to the earthing system then to the earth at the safest way.

We have been providing a full range of steel fabrication services for our clients which includes Top International Contractors and Process Manufacturers. Our fabrication facility stands at 45,000 m2 of land area with welding lines, CNC Plasma/Gas cutting machines, MIG/MAG Welding, Cold Rolling machines, Milling equipment, shot blasting and sandblasting, painting and drying and corrosion protection machinery.With the help of our comprehensive machinery, experienced technical team and quality system our fabrication process becomes defect-free