Pneumatic - Import export

It can fill between 50-500 ml. It can fill between 100-1000 ml It can fill between 250-1500 ml It can fill between 1000-5000 ml The system works with pneumatic 7-8 bar air pressure. System milliliter and weight adjustment are provided by sensors. It makes 750-1500 fillings per hour depending on the consistency of the product. Working voltage is 220 volts 50 Hz. Control voltage is 24 volts. The system works automatically and manually. It is guaranteed for 2 years against factory faults.

Pneumatic Precision Sowing Machines with Disc allow seed to be sowed precisely in the desired sowing range and intra-row distance. It is manufactured with 4-6-8 rows optionally. Seed bed is opened with the help of discs in sowing units. Each sowing unit consists of 2 discs made of special material. It can operate in fields with processed or semi-processed stem remains thanks to cutter discs that can be attached to front side of chassis and disc type sowing units. Because movement obtained from wheel is transmitted to sowing units by shaft mechanism, precision sowing can be performed in intra-row distances. Due to rubber wheels located on both sides of the Sowing Units, precise Depth adjustment can be made in all kinds of soil conditions.

PRODUCT INFORMATION It is used for the processing of slots for locks, drilling handles, hinges, espagnolette holes and opening water drain slot on aluminum profiles up to 3 mm of thickness. Copy fitting operates manually and the figures on the template are machined at 1:1 ratio The aluminum profiles up to 3 mm of wall thickness can be machined with a strong spindle motor The cutting fluid controlled with a joystick is sprayed to the milling spot Slots in varied lengths and widths can be opened without using the copy milling template The length of the water drain slot is adjustable on the template Copy milling motor is directly controlled via joystick Reference stops at 2 sides of the milling machine Standard equipped with inlet-outlet conveyor Ergonomic hand control unit STANDARD ACCESSORIES • Ø 5mmx L :80mm of router bit • Air gun • 2 x profile stops both left and right • Spray tool lubrication system • 2x horizontal clamps OPTIONAL ACCESSORIES • Additional router bits

PRODUCT INFORMATION KP 110 machine is designed and constructed for the pneumatically crimping and correct assembly of aluminum profiles. The machine is semiautomatic and the machining cycle of various units are manual controlled by user who always stays outside of the dangerous area. It is designed through the pneumatically crimping system Cast iron construction of the body that is strong and lasting Magnetic support of knives according to the shape and height of the profiles Reading of the positioning value via millime ter special scales Simultaneous stroke of crimping heads Double-acting stroke of bracing clamp apears from the table Support arms on the left and right of the machine The machine is equiped with the foot pedals for the operation control during the machining cycle Operator safety guard Operating stroke of knives : 10.5 mm Bracing clamp stroke: 80 mm Adjustable stroke of knives: from 30 mm to 60 mm STANDARD ACCESSORIES • 1x3 mm, 1x5 mm and 1x7 mm crimping knives

PRODUCT INFORMATION It is used for the processing of slots for locks, drilling handles, hinges, espagnolette holes and opening water drain slot on PVC and aluminum profiles up to 3 mm of thickness. Opening locks, drilling handles, hinges, espagnolette holes etc. on PVC and aluminum profiles Cast aluminum structure Corrosion proof bearing shaft Robust machine stand constructed from steel sheet Electroplated copy template Two pcs of tracer pins Ø5 router bit included Clamping capacity : W max.:130, W min.:10, H max:130, H min.: 20 mm STANDARD ACCESSORIES • Ø5 mm of router bit • Air gun • 2x left and right profile stops • 2x pneumatic horizontal clamps • Spray tool lubrication system OPTIONAL ACCESSORIES • Additional router bits • Special copy templates • MA 240 centering apparatus • MKN 150 roller conveyor TECHNICAL SPECIFICATIONS 750W 400V 50~60 Hz / 550W 230V 50 Hz x:270 y:110 z:130 mm 14000 D/dak. RPM W:64 L:80 H:149 cm. 110kg. 72 kg.

ENIGMA pneumatic elements are built to meet the toughest requirements for holding workpieces in place. Workpieces are fixed in almost all applications of a production environment. In the metalworking industry, welding, bending, grinding, testing, assembly, etc. is a basic requirement. Workpieces need to be held with a certain pressure force in a programmed process as soon as possible. After the workpiece is clamped, it is usually machined.

Mold Cooling Equipments and Accessories, nippels, threadless pressure plugs, plugs, muffs, reducers, male threaded hose tails etc.

PNEUMATIC QUICK COUPLINGS for pneumatic connections

PNEUMATIC QUICK COUPLINGS for pneumatic connections

PNEUMATIC QUICK COUPLINGS for pneumatic connections

PNEUMATIC QUICK COUPLINGS for pneumatic connections

PRECISION STE EL TUBES •EN 10305-1 •EN 10305-2 •EN 10305-3 •EN 10305-4 (HPL) •EN 10305-5 Seamless, cold-drawn precision steel tubes EN 10305-1 Seamless, cold-drawn precision steel tubes have a particularly high dimensional tolerance with regard to the outer and inner diameter and/or the wall thickness. T Facts and Figures Diameter (OD)4 mm – 125 mm Wall thickness (WT)0,5 mm – 13,0 mm MaterialE215, E235, E255, E355, C35E, C45E 16Mo3, 25CrMo4, 42CrMo4, 25CrMo4 other materials upon request Treatment condition+C +LC, +SR, +A, +N TestsEddy current testing EN 10893-2 extra charged: Ultrasonic testing EN 10893-10 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

WELDED STEEL LINE TUBES •EN ISO 3183 Steel tube for pipeline transportation systems EN ISO 3183 •with / without PE sheat Steel tubes for pipeline transportation systems are used to supply oil and gas media. In addition to the usual design with PE sheathing, we can also supply these tubes without PE sheathing. Facts and Figures Diameter (OD)21,3 mm – 323,9 mm Wall thickness (WT)2,0 mm – 7,1 mm (hot stretch-reduced) 2,0 mm – 12,7 mm (tape-welded) MaterialL245 – L485 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

CYLINDER TUBES (HPS & HPZ) •EN 10305-1 (HP) •EN 10305-2 (HPZ) •EN 10305-2 (HPS H9) Seamless, cold-drawn HP precision steel tubes EN 10305-1 Seamless, cold-drawn HPZ tubes have the best dimensional tolerances, plus excellent straightness and roundness. These tubes are thus excellently suited to peeling or honing. A recommended ultrasonic test can also be carried out for a surcharge Facts and Figures Diameter (OD)50,0 mm – 125,0 mm Wall thickness (WT)5,0 mm – 7,5 mm MaterialE355 Treatment condition+SR TestsEddy current testing EN 10893-2 extra charged: Ultrasonic testing EN 10893-10 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

BOILER TUBES •EN 10216-2 •EN 10216-3 •EN 10217-2 •EN 10217-3 Seamless tubes for pressure purposes EN 10216-2 •unalloyed and alloyed tubes, increased temperature Seamless boiler tubes of this standard have extraordinary temperature and pressure resistance. Due to the production process, a great deal can be offered with regard to purpose-optimized steel qualities. Facts and Figures Diameter (OD)21,0 mm – 610 mm Wall thickness (WT)2,0 mm – 60,0 mm MaterialP195 GH P235 GH, P265 GH, 16Mo3 13CrMo4-5, 25CrMo4 10CrMo9-10 Treatment condition+N TestsTC1 (not including US testing) TC2 (including US testing) VersionsBlack, painted Device pressure standardsAD-2000 W0, AD 2000 W4, PED ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

Agricultural machineries for Planting, Seeding or Sowing. Group includes pneumatic planters, axe and disc type tine planters, No Till, trailed type, with gearbox and for vegetables Through our wide network in country, we have competitive prices for our customers with high quality products. One of the most important point for customers is, our flexible and customer focused operation always supports them to find proper machines for their usage or necessaries. All products are produced from high quality materials. All kind of spare parts are available for users. Products includes many variations and options in itself. For more information you may visit our website.

-RPM selection for different materials with the 2-speed motor -45° right hand to 45° left hand saw positioning, accurate and precise cutting in two directions -Coolant circulation to remove materials' chips and to cool the disc -Adjustable gear according to the size of the material -24 V low voltage system -Emergency stop button -Moving saw protection guard -Motor protection kit -Burr-free cutting -Precise cutting by centering the material with the double-sided pneumatic vice -control -Comes with a stop rod for repeatable cuts -Hassle-free performance

-RPM selection for different materials with the 2-speed motor -45° right hand to 45° left hand saw positioning, accurate and precise cutting in two directions -Coolant circulation to remove materials' chips and to cool the disc -Adjustable gear according to the size of the material -24 V low voltage system -Emergency stop button -Moving saw protection guard -Motor protection kit -Burr-free cutting -Precise cutting by centering the material with the double-sided pneumatic vice control -Comes with a stop rod for repeatable cuts

For video : https://bit.ly/3rLexUi Automatic Casting Trolleys are especially preferred in iron and steel industry foundries. It is one of the transfer systems that provide high safety and efficiency during the casting of serial molds. It can regulate the line speed and work in accordance with the line speed. They are vehicles that can overturn the crucible (approximately 3500 kg) with a capacity of carrying 1.6 tons of molten steel at 110ᵒ degrees. They are specially designed according to the customer's line specifications. Tıkır Makina has been producing vertical and horizontal transfer systems for the industry since its establishment. It has the ability to produce conveyors, elevators, autonomous driverless forklifts and special design projects according to your needs.

-Pneumatic cylinders -Solenoid, Pilot, manual and mechanical operated directional control valves -Flow control valves -ISO and Micro valves -Pneumatic hoses -Air treatment units -Piston operated valves and pulse solenoid valves -One touch plastic - metal - stainless steel fittings -Pneumatic accessories

Proval A210 Series innovative, compact design pneumatic rack and pinion rotary actuators including all critical components are manufactured in-house using dedicated state-of-the-art CNC machines following ISO quality assurance standards. Proval pneumatic actuators that can be set either to fail-open or fail-close, comes in 18 different sizes in both double and single acting types. This Series of actuators having torque figures in ranges 9 to 9767 Nm are well suited to operate part-turn valves such as plug ,ball and butterfly valves.