Aluminium heat exchangers - Import export

Corrosion resistant, light Aluminium heat exchanger Efficiency up to %108,5 Modulation ratio 71 8 different capacities (1000 kW to 1650 kW) Cascade system with 16 boilers

Corrosion resistant, light Aluminium heat exchanger Efficiency upto %109 Five capacities options (70 , 95, 125, 155, 190* kW) Cascade system with 16 boilers 17 modulation ration Workıng pressure 6 bar High combustion performance with low exhaust emission Different zone controls with Siemens control panel Compability with Open Therm ve BUS comunication systems External chimney flap Low noise level Easy to use and maintenance

Aluminium heat exchanger in monobloc casting Heat output , 24 kW & 28 kW Compact esthetic design. Low pneumatic resistance High modulation range possible Low hydraulic resistance. Fully water cooled heat exchanger with round burner head Equipped with fiber coated, premix round – burner Also option for delivery as complete heat cell

Aluminium heat exchanger Heat output from 50 kW to 3250 kW High corrosion resistance Efficient heat transfer Compact size for easy installation and maintenance Self cleaning with special pin design Low pneumatic resistance High modulation range possible Low hydraulic resistance. Excellent thermal conductivity Equipped with fiber coated, premix round – burner

Corrosion resistant, light Aluminium heat exchanger Efficiency upto %107 Six different capacities for Ongas 300 (70, 95,115,125,155,190 kW) Eight different capacities for Ongas 600 (220,305,380,455,530,605,680,850 kW) Cascade system with 16 boilers

Corrosion resistant, light Aluminium heat exchanger Efficiency up to %108,5 Modulation ratio 71 12 different capacities (830 kW to 3250 kW) Cascade system with 16 boilers Workıng pressure 6 bar High combustion performance with low exhaust emission Different zone controls with Siemens control panel Compability with Open Therm ve BUS comunication systems Easy to use and maintenance

Corrosion resistant, light Aluminium heat exchanger Efficiency upto %107 Five different capacities for Ongas 300 (70, 95, 125, 155, 190* kW) Nine different capacities for Ongas 600 from 230 kW to 850* kW Cascade system with 16 boilers Workıng pressure 6 bar High combustion performance with low exhaust emission Different zone controls with Siemens control panel 17 modulation ration Compability with Open Therm ve BUS comunication systems Low noise level Easy to use and maintenance

We design and manufacture products based on the project sent by our customers or according to customer requirements. Calculations, designs and projections according to customer demand and in accordance with ASME Code Section VIII Div 1 and 2 (American Society Mechanical Engineers), API 661, API 650 (American Petroleum Institute), TEMA (Tubular Exchanger Manufacturers Association), AD-MERKBLAATTER, CODAT, DIN, EN 13445, PED 2014/68 / AB and TSE. The most common processes in the Oil & Gas, Petrochemical & Chemical, Food & Beverages and Heavy & Light Industry require a significant number of equipment to exchange heat or to storage different fluids or components. The fluid can be either liquid or gas, and one of each flows into the tube and the other flow out of the tube is used to boil, condense or cooling the fluid.

EVA SERIES SHELL&TUBE EVAPORATORS RANGE FROM 20KW TO 1510 KW COOLING CAPACITY IN EVAPTON'S STANDARD CONDITIONS. THE REFRIGERANT SIDE CAN BE MANUFACTURED FROM 1 CIRCUIT TO 4 CIRCUITS. EVA SERIES EVAPORATORS CAN BE USED IN HCFC AND HFC REFRIGERANTS WITH MEDIUM TO HIGH SYSTEM PRESSURE (30-45 BAR). EVA SERIES EVAPORATORS CAN BE MANUFACTURED BOTH IN STANDARD CATALOGUE DIMENSIONS AND IN THE DIMENSIONS REQUESTED BY THE CUSTOMER. EACH EVAPORATOR MANUFACTURED IS CONTROLLED AND TRANSMITTED TO THE CUSTOMER BY MEANS OF UNILAB LICENCE PROGRAMME FOR CAPACITY AND PRESSURE DROPS.

IT IS THE MOST WIDELY USED HEAT EXCHANGER IN INDUSTRIAL FACILITIES SUCH AS IRON AND STEEL, PETROLEUM, PETROCHEMICAL, GAS, POWER PLANTS, FOOD, PHARMACEUTICALS, LEATHER, TEXTILES, AIR CONDITIONING, SHIPS AND MARITIME SECTORS THE HEAT EXCHANGERS USED IN THE INDUSTRIES CAN BE USED IN ALL SECTORS WHERE THERE IS A SECOND ALTERNATIVE ENERGY REQUIREMENT FROM AN ALTERNATIVE ENERGY WHILE ONE FLUID RUNS THROUGH THE TUBES, OTHER FLUID FLOWS OUTSIDE THE TUBES BUT INSIDE THE SHELL AS PARALLEL OR ACROSS THE TUBES. SO, HEAT IS TRANSFERRED OVER TUBE SURFACES. IT CAN BE PRODUCED AS COPPER TUBE, BAFON TUBE(CU-NI), STAINLESS STEEL AND STEEL.

EV SERIES SHELL&TUBE EVAPORATORS RANGE FROM 20KW TO 1510 KW COOLING CAPACITY IN EVAPTON'S STANDARD CONDITIONS. THE REFRIGERANT SIDE CAN BE MANUFACTURED FROM 1 CIRCUIT TO 4 CIRCUITS. EV SERIES EVAPORATORS CAN BE USED WITH HCFC AND HFC REFRIGERANTS WITH MEDIUM TO HIGH SYSTEM PRESSURE (30-45 BAR). EVA SERIES EVAPORATORS CAN BE MANUFACTURED BOTH IN STANDARD CATALOG SIZES AND IN THE SIZES REQUESTED BY THE CUSTOMER. EVERY EVAPORATOR MANUFACTURED IS CONTROLLED BY UNILAB LICENSE PROGRAM FOR CAPACITY AND PRESSURE DROPS AND TRANSMITTED TO THE CUSTOMER. EVS - SINGLE CIRCUIT EVAPORATOR EVD - DOUBLE CIRCUIT EVAPORATOR

EVAPTON WATER CONDENSERS ARE USED FOR CONDENSING THE REFRIGERANT GAS IN INDUSTRIAL AND COMFORT COOLING SYSTEMS AND ARE MANUFACTURED IN EVAPTON STANDARDS OR IN SPECIAL DESIGNS ACCORDING TO DEMAND. WHILE ECON-C SERIES CONDENSERS ARE PRODUCED FOR COOLING APPLICATIONS USING MAINS WATER OR WATER COOLING TOWER WATER, ECON-M MODEL CONDENSERS ARE PRODUCED FOR SEA WATER OR SALT WATER. IT CAN BE MANUFACTURED FROM 20 KW COOLING CAPACITY UP TO 1500KW COOLING CAPACITY.

Plate heat exchangers consist of a number of corrugated plates. The plate pack is mounted between a fixed and movable pressure plate, positioned by an upper and lower carrying bar, and compressed by several tightening bolts. The media involved in the heat exchange process are fed into the plate pack via connections on the fixed and movable pressure plates. The arrangement of the plates creates two separate channel systems, enabling the two media to flow past and between each other without physical contact, leaving the exchanger again via connections in the pressure plates. Plate with different patterns can be mixed in the heat exchanger in order to achieve optimum efficiency at a given pressure drop.

Heat exchanger from 24 kW to 3250 kW High corrosion resistant Excellent thermal conductivity High combustion performance with low exhaust emissions Easy operation and maintenance