Cast iron valves - Import export

Body- Cover : GG-25 Cast Iron ( EN GJL 250 ) / Ball : Ductile Iron or Stainless Steel / Gasket : PTFE - Teflon / O-Ring : EPDM- NBR / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure: 10-16 Bar *** Applications Area : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Body- Cover : GG-25 Cast Iron ( EN GJL 250 ) / Ball : Ductile Iron or Stainless Steel / Gasket : PTFE - Teflon / O-Ring : EPDM- NBR / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure: 6 Bar *** Applications Area : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Body- Cover : GG-25 Cast Iron ( EN GJL 250 ) / Ball : Ductile Iron or Stainless Steel / Gasket : PTFE - Teflon / O-Ring : EPDM- NBR / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure: 16 Bar *** Applications Area : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

These valves have closure system in screen form by means of slide and connected to pipe lines and used for stopping fluid inside pipe. Screwed shaft which is mounted inside housing moves slide up and down and performs open and close operation for valve. Sealing is maintained by gasket which is coated over slide. They are used liquids which do not have abrasive property and in liquid fuel installations. They are not used for controlling and flow adjustment.

ENGİNE CONTROLLED DOUBLE ECCENTRIC BUTTERFLY VALVE

Body : GG-25 Cast Iron (EN GJL 250) / Disc : Ductile Iron+ Nickel Coated / Handwheel : Ductile Iron+ Nickel Coated / Shaft : Stainless Steel / Gasket : EPDM-NBR-PTFE-VITON / Connection : Flanged (Wafer Type) / Max. Working Temp. : 110 ºC / Max. Working Pressure : 16 Bar *** Applications Area : HVAC Systems / Water Treatment Systems / Paper Industry / Fresh Water System

Body : GG-25 Cast Iron (EN GJL 250) / Disc : Ductile Iron+ Nickel Coated / Handwheel : Ductile Iron+ Nickel Coated / Shaft : Stainless Steel / Gasket : EPDM-NBR-PTFE-VITON / Connection : Flanged (Lug Type) / Max. Working Temp. : 110 ºC / Max. Working Pressure : 16 Bar *** Applications Area : HVAC Systems / Water Treatment Systems / Paper Industry / Fresh Water System

Body: ASTM A-536 Cast Iron / Valves : Bronze Surface covered with Teflon, Stainless steel Trim Set / Pilot control valve and system: Bronze ASTM B62 and Stainless steel 303 inner parts ** Connection Type: Flanged / Pressure :16-25 Bar / Working Temp.: +4ºC , + 80ºC *** This valves using for the preventing damages which cause from the pressure in fire pump systems. Generally fire protection systems use the diesel pumps and electrical motors. In that systems relief valves are preferred. **** Application Areas: In systems which has diesel or electrical high pressure fire fighting pumps.

Body and Cover : ASTM A-536 Cast Iron / Valve Inner Parts: Bronze ASTM B61 / Pilot Control Valve and System: Bronze ASTM B62 w / Stainless Steel 303 Inner parts / Valve diaphragm: Buna-N neoprene ** Connection Type: Flanged / Pressure :16-25 Bar / Working Temp.:+4ºC , + 80ºC *** Increases the system equipment life and save the water in tank which is used for unnecessary operations. These valves are used to reduce the pressure which is over the limits on the system. **** Application Areas: After hydraulic calculations, If any pressure adjustment is needed, pressure reducing valves are suitable.

DISMANTLING JOINT

-Group 1 Moulding Line : Brand : Georg Fischer Type : Impact Standard IM-S-1 otomatik yatay kalıplama hattı Dimensions : 800 x 600 x 250/250mm Capacity: 120 mold / hour Pooring Unit: Inductotherm Visipour P3 Otomatik Tundish Sand Unit : Georg Fischer Conveyor Systems: Georg Fischer Shakeout: Jöst -Group 2 Moulding Line : Brand : HWS (Heinrich Wagner Sinto) Model : Seiatsu EFA-SD otomatik yatay kalıplama hattı Dimensions : 900 x 700 x 300/300mm Capacity: 120 mold / hour Pooring Unit: HWS Otomatik döküm potası Sand Mixer: Eirich RV24 - 3000 Lt - 78 m3 mold sand / hour Sand Control Unit: QualiMaster AT1 Conveyor Systems: VHV Belt Conveyor, Jöst Vibra Conveyor Stakout : Jöst Cooling Tunnel : Jöst

4 pieces of 3 tons capacity Dual-Track Inductotherm Induction Furnace 4 pieces of 5 tons capacity Dual-Track Inductotherm Induction Furnace

IRON- CASTİNG OVEN STOVE

STOVE CAMPİNG

ETNA OVEN STOVE

WOOD BURNING COOKING STOVE FOR KITCHEN AND HEATING

MELTING UNIT– 1 • Brand: Inductotherm • Type: Dual Truck – 2.250 KW • Capacity: 3 tons/each x 4 unit MELTING UNIT– 2 • Brand: Inductotherm • Type: Dual Truck – 3.500 KW • Capacity: 5 tons/each x 4 unit

1 unit DISA 40 L. Core Machine 1 unit hottinger 25 L. Vertical Core Machine 1 unit hottinger 20 L. Vertical Core Machine 3 unit hottinger 12 L. horizontal Core Machine Laempe 9 ton/hour Sand Mixer Laempe 5 ton/hour Sand Mixer Laempe Sand Dosing Unit Laempe Central Amine GAs Unit Lazyou Double COnveyor Core Drying Oven

we are ready to supply you with all kinds of Iron ingots! C: 4.30- 4.50 Si: 1.5- 2.00 Mn: 0.30- 0.70 P: 0.07- 0.15 S: 0.07- 0.15 Cr: 0.12-0.32 Please feel free to contact me if you need any further information. Mobile: +905318337385 Email: y.nazari@tedoraco.com Website: www.tedoraco.com

1.Different models of LPG/ LNG natural gas burners 2.Different models of gas stove top cast iron grates 3.Cast iron portable cookers 4.Ribbed, half ribbed and flat grid plates 5.Various models of lava-stone cast iron grids/grills 6.Different models of wok and wok burners EMAIL: export@ariogludokum.com OR WHATSAPP:+90 533 155 72 81

Shotblasting 1 Unit Wheelabrator Drum Type Continue Shotblasting Machine 1 Unit Georg fisher Drum Type Continue Shotblasting Machine 2 Unit Endümak Hang Type Continue Shotblasting Machine 2 Unit Endümak DrumType Continue Shotblasting Machine Grinding 2 Unit KOYAMA - P.S. Auto Grinding 400TTi 50 kg. • 2 Unit KOYAMA - P.S. Auto Grinding 400i 20 kg. • Manual Grinding Units

Body- Cover : GGG-40.3 Ductile Iron (EN GJS 400-15) / Ball : Ductile Iron or Stainless Steel / Gasket : PTFE - Teflon / O-Ring : EPDM- NBR / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure: 40 Bar *** Applications Area : Pressured Gases / Liquid Fuels / Natural Gas and LPG

Cold Casting Wrought Iron ,reliable and very Productive.Can use different molds for different needs.

Wrought Iron Cold Cast Machine 2 product feature materials 6X12,12X12,20X10-5, 30X10-5,40X10-5,20', 30' 40' profil.Motor output 7.5 KW reduct motor. Capacity maximum 1500m per hour.