Body and Cover : ASTM A-536 Cast Iron / Valve Inner Parts: Bronze ASTM B61 / Pilot Control Valve and System: Bronze ASTM B62 w / Stainless Steel 303 Inner parts / Valve diaphragm: Buna-N neoprene ** Connection Type: Flanged / Pressure :16-25 Bar / Working Temp.:+4ºC , + 80ºC *** Increases the system equipment life and save the water in tank which is used for unnecessary operations. These valves are used to reduce the pressure which is over the limits on the system. **** Application Areas: After hydraulic calculations, If any pressure adjustment is needed, pressure reducing valves are suitable.
Switzerland
The ideal and reliable highflow CO2 pressure reducing valve for use with CO2 gas or liquide. Constructed in brass (C31) and meehanite (C2K32) with stainless steel trim Abrasion and dirt resistant rubber valve seats Dome loading either from inlet line or separate gas supply Stable and noiseless operation Positive gastight shutoff Highflow contoured passages
Request for a quoteGermany
The GEMÜ N082, N182 and N782 pressure reducers ensure that a constant outlet pressure is maintained in process plant utilizing the pressure differential.If the pressure rises on the outlet side, the spring force is lower and the valve closes as the spring is raised. The pressure is reduced until the spring force and the outlet pressure are the same. If the pressure falls, the valve opens as the spring force presses against the diaphragm surface via the control aperture. The outlet pressure can be read off a diaphragm-protected pressure gauge (not available for N782) and the spring force adjusted using a set screw as required. - The working pressure can be very easily adjusted using a set screw and secured with the integrated lock nut. If required, the setting that has been made can be lead sealed - The flow-efficient design of the valve body ensures good flow rate values - Control errors are kept to a minimum due to the large control face and the spiral spring
Request for a quotePoland
VOGELMANN ROTAMETER - BOTTLE REDUCER WITH ROTAMETER ARGON / CO2 PRESSURE REDUCER ROTAMETER. A universal gas regulator with a rotameter by VOGELMANN allows you to reduce the pressure of gases taken from the cylinder to the required operating pressure. It allows the self-actuation of pressure at the possible constant level, regardless of changes in inlet pressure. APPLICATION. Single-stage reducer most often used in welding during TIG welding , which requires precise gas flow setting. GAUGE AND ROTAMETER. It has a pressure gauge that shows the cylinder pressure and a rotameter that shows gas flow per minute. GAS TYPE. It is designed for technical gases such as argon (Ar), carbon dioxide (CO2) and MIX of these gases (Ar / CO2). UNIVERSAL. The gas regulator can be connected to any standard cylinder with a W21.8 x 1/14 thread.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.