Turbine pump - Import export

It is a material with high stretching resistant to sea water and corrosion. Under heavy load and at bearings and bushings with low speed, at gears which operates in pumps and turbine wheels and requiring high strength.

# Side aspiration Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.

# Side aspiration Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.

Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.

Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC Side aspiration IPX4

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.

Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. USES: Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.

Maintenance Partners offers training courses on various technical subjects to its customers. Trainings allow you to obtain in-depth knowledge about maintenance of mechanical and electrical rotating equipment. Depending on your specific needs and goals, trainings can also be customized to be more effective. Training Courses AC Motors Balancing Compressors DC Motors Gearboxes Generators Material Analysis Mechanical Measurements Pumps Rewinding Steam Turbines Vibration Measurement & Analysis Contact Want to now more about the trainings above or how Maintenance Partners can provide a customized training for your personnel?

Maintenance Partners offers training courses on various technical subjects to its customers. Trainings allow you to obtain in-depth knowledge about maintenance of mechanical and electrical rotating equipment. Depending on your specific needs and goals, trainings can also be customized to be more effective. Training Courses AC Motors Balancing Compressors DC Motors Gearboxes Generators Material Analysis Mechanical Measurements Pumps Rewinding Steam Turbines Vibration Measurement & Analysis

We manufacture PELTON runner in aluminium bronze, delivered "as cast" or rough machined. New built, spare parts, retrofit

Gearbox oil pumps, Motor pitch control pumps and other hydralical pumps for Bonus, Vestas, GE and others.

MECAPLUS-HP “AGILE” MACHINING High precision and performance solution HIGH PRODUCTIVITY 3 axes milling equipment : “AGILE” MACHINING • Designed and realized for an intensive use. • Heavy, fast, powerful, precise and efficient equipment, easy to operate for the machining of rigid sheet materials of strong thickness, in the fields of plastic processing, modelling, aeronautics, aluminium processing… or for the machining of molds and 3D models. • Particularly adapted for the machining of aluminium, plastic materials of strong thickness and composite materials with high mechanical properties. • Many customization possibilities. • Innovative and efficient vacuum tables with turbine technology or vacuum pumps. • Numerical controls SIEMENS or HEIDENHAIN type. • Quality kinematics integrating industrial components supplied by the world leaders in their field, mounted on welded stabilized steel frames.

This new 3 axis CNC machine range has been entirely modified in 2006. Completely covered, this equipment is in conformity with CE norms. Refer to the exemples of applications : Moulds and models EDM electrodes Bronze medal Telephone casing model MACHINING CENTER FOR 3D PRECISION ENGRAVING AND MOULDS , MODELS, ELECTRODES OR PUNCHES REALIZATION EQUIPMENT OPTIMIZED FOR THE MACHINING OF FOLLOWING MATERIALS: . Aluminium . Synthetic resins . Steel . Brass and copper alloys . Plastics and composites . Graphite AVAILABLE SIZE: Model X travel mm Y travel mm Z travel mm TR 75 520 750 325 TECHNOLOGY: . Kinematic unit with fixed table and mobile gantry. . Steel welded frame. . Steel welded mobile gantry . Vacuum table in aluminium profiles or composite . Holding of plates by vacuum generated either by lateral canal turbines or by vacuum claw pumps. Selection of zones with manual valves. . Motorisation by AC Brushless servomotors on the 4 axes (X1-X2-Y-Z), double driving on X axis. ....

The water to be filtered enters via the inlet connector tangentially to the cylindrical body, it falls on the acceleration cone and increases more and more speed - The centrifugal force that is created by separating 'water the suspended solids with higher specific weight . A separation occurred the filtered water is conveyed into the outlet manifolds, while the impurities descend into the collecting tank where, special deflectors shall reset the speed preventing the ascent. The contaminant is removed drenandolo continuously or in time through the discharge valve. Uses: • For the protection of installations in which circulates industrial or domestic water. • For the protection of closed or open circuits of hot and cold water, cooling systems (in particular of the spray nozzles and the evaporating bodies). • For protection of the gland, the labyrinth seals and clutch rings Carbon mechanical seals for pumps and turbines.

An indirect dry cooling system is characterized by the use of a condenser and air-cooled heat exchangers.The cooling system consists of the following main components :condenser (surface or spray type),cooling water circulating pumps and recovery turbines, if applicable,heat exchanger deltas including louvers,natural draft cooling tower,piping and valves,water storage tanks and transfer pumps,electrical equipment,instrumentation and control,accessories such as cleaning system, nitrogen blanketing system,The warm water from the condenser is delivered to the natural draft cooling tower by the cooling water circulating pumps and an underground piping network. After the cooling in the heat exchangers, the cold water returns to the condenser.

Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)

Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)

Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)

Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)

Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)

Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)

Data sheet Product The centrifugal filter AEROIL has been designed for the separation of oil from the air sucked, through the principle of centrifugation and for an easy “machine-side” application, in the field of machinetools. In the mechanical work-processing where especially “heavy” oils are utilized , it can be employed separately by itself, in all other cases it is recommended to use it as the pre-filter of an electrostatic filter placed down-stream. The AEROIL with its limited dimension and weight can be installed onboard the machine, or over a raised platform previously arranged. Application Mechanical industry: multiple-operation-lathes, threading machines, toothing machines, grinding/refacing machines, etc. Graphic industry: typographic rotary press for newspapers (ink fogs), etc. Food processing industry: vegetal oil nebulizers, machines for pasta processing, etc. Other fields: turbines, compressors, pumps, lubricators, vaporizers, etc. The AEROIL separator looks...