Results for
Turkey
It is a material with high stretching resistant to sea water and corrosion. Under heavy load and at bearings and bushings with low speed, at gears which operates in pumps and turbine wheels and requiring high strength.
Request for a quotePortugal
# Side aspiration Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.
Request for a quotePortugal
Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.
Request for a quotePortugal
Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC Side aspiration IPX4
Request for a quotePortugal
# Side aspiration Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.
Request for a quotePortugal
Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.
Request for a quotePortugal
Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. USES: Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request
Request for a quotePortugal
Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.
Request for a quoteFrance
We manufacture PELTON runner in aluminium bronze, delivered "as cast" or rough machined. New built, spare parts, retrofit
Request for a quoteGermany
BIAX Universal Scraper, heavy-duty model particularly suitable for: - extreme heavy scraping work in large machine construction - steel scraping work on guide-beds and machine columns, in case of turbines, transmissions and in pump construction. Order number 200040400 Power [W]800 Noise level [db (A)]71 Weight [g]5,5 kg (Dimensions scraper LxWxH 460 x 80 x 107 cm) No. of strokes [min¯¹]500-1.850 Stroke length [mm] 0-20 mm Included Accessories 1x hexagonal screwdriver SW 4 (item no. 001 363 503) 1x hexagonal screwdriver SW 6 (item no. 001 363 502) 1x scraper carrying case (item no. 001 401 819) 1x set of 2 pcs. Carbon brushes 230 V (item no. 001 328 362) 1x special oil for adjustment plate 30 ml (item no. 001 365 635) 1x operating instructions (item no. 001 238 344) 1x spare parts list (item no. -) optional accessories: 1x Handle* (item no. 003 004 748) [*not included in the scope of delivery!] 2x ratchet screw* (item no.
Request for a quoteNetherlands
Gearbox oil pumps, Motor pitch control pumps and other hydralical pumps for Bonus, Vestas, GE and others.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
France
This new 3 axis CNC machine range has been entirely modified in 2006. Completely covered, this equipment is in conformity with CE norms. Refer to the exemples of applications : Moulds and models EDM electrodes Bronze medal Telephone casing model MACHINING CENTER FOR 3D PRECISION ENGRAVING AND MOULDS , MODELS, ELECTRODES OR PUNCHES REALIZATION EQUIPMENT OPTIMIZED FOR THE MACHINING OF FOLLOWING MATERIALS: . Aluminium . Synthetic resins . Steel . Brass and copper alloys . Plastics and composites . Graphite AVAILABLE SIZE: Model X travel mm Y travel mm Z travel mm TR 75 520 750 325 TECHNOLOGY: . Kinematic unit with fixed table and mobile gantry. . Steel welded frame. . Steel welded mobile gantry . Vacuum table in aluminium profiles or composite . Holding of plates by vacuum generated either by lateral canal turbines or by vacuum claw pumps. Selection of zones with manual valves. . Motorisation by AC Brushless servomotors on the 4 axes (X1-X2-Y-Z), double driving on X axis. ....
Request for a quoteItaly
The water to be filtered enters via the inlet connector tangentially to the cylindrical body, it falls on the acceleration cone and increases more and more speed - The centrifugal force that is created by separating 'water the suspended solids with higher specific weight . A separation occurred the filtered water is conveyed into the outlet manifolds, while the impurities descend into the collecting tank where, special deflectors shall reset the speed preventing the ascent. The contaminant is removed drenandolo continuously or in time through the discharge valve. Uses: • For the protection of installations in which circulates industrial or domestic water. • For the protection of closed or open circuits of hot and cold water, cooling systems (in particular of the spray nozzles and the evaporating bodies). • For protection of the gland, the labyrinth seals and clutch rings Carbon mechanical seals for pumps and turbines.
Request for a quoteBelgium
An indirect dry cooling system is characterized by the use of a condenser and air-cooled heat exchangers.The cooling system consists of the following main components :condenser (surface or spray type),cooling water circulating pumps and recovery turbines, if applicable,heat exchanger deltas including louvers,natural draft cooling tower,piping and valves,water storage tanks and transfer pumps,electrical equipment,instrumentation and control,accessories such as cleaning system, nitrogen blanketing system,The warm water from the condenser is delivered to the natural draft cooling tower by the cooling water circulating pumps and an underground piping network. After the cooling in the heat exchangers, the cold water returns to the condenser.
Request for a quoteGermany
Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)
Request for a quoteGermany
Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)
Request for a quoteGermany
Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)
Request for a quoteGermany
Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)
Request for a quoteGermany
Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)
Request for a quoteGermany
Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)
Request for a quoteItaly
Data sheet Product The centrifugal filter AEROIL has been designed for the separation of oil from the air sucked, through the principle of centrifugation and for an easy “machine-side” application, in the field of machinetools. In the mechanical work-processing where especially “heavy” oils are utilized , it can be employed separately by itself, in all other cases it is recommended to use it as the pre-filter of an electrostatic filter placed down-stream. The AEROIL with its limited dimension and weight can be installed onboard the machine, or over a raised platform previously arranged. Application Mechanical industry: multiple-operation-lathes, threading machines, toothing machines, grinding/refacing machines, etc. Graphic industry: typographic rotary press for newspapers (ink fogs), etc. Food processing industry: vegetal oil nebulizers, machines for pasta processing, etc. Other fields: turbines, compressors, pumps, lubricators, vaporizers, etc. The AEROIL separator looks...
Request for a quoteUnited Kingdom
For many workplaces, machine oil is used as the lubricant or coolant that keeps parts from wearing, saving time and money by decreasing the need for repairs. However, one of the inevitable by-products of pumps, compressors, turbines and other machines using oil is oil mist.
Request for a quoteResults for
Turbine pump - Import exportNumber of results
29 ProductsCountries
Company type