Total parts - Import export

Storage systems from Lödige provide a total integrated solution for parts and tools to be stored in an efficient and save-spacing saving way. Lödige storage systems can be fully automated to store and transport anything from small parts to very large and heavy aircraft parts and tools. We develop high-throughput storage systems in line with customer requirements to support your dispatch reliability and speed.

The machine is designed for cleaning and degreasing of cylindrical and heavy parts with total length up to 4500 mm and diameter up to 150 mm. Each part is placed on a trolley and loaded inside the chamber of the machine. The cleaning process is carried out by seven nozzle collectors – six rotating and one moving up/down. The machine provides a combination of fully automated and manual cleaning. The dosing of the detergent is manual. The washer is equipped with a filter that catches particles with dimensions larger than 250 μm. There is mounted a fan for exhausting of the vapour and lighting inside the washing chamber. The machine body is made entirely out of stainless steel, material EN 1.4301 / AISI 304. The equipment complies with the high CE- Requirements and EU – and USDA regulations.

The pressure switch P01 has been designed especially for use in mobile machines. The EMC characteristics as well as the impact and vibration resistances have been designed for this field of application. This facilitates their use in adverse ambient conditions such as can be found in mobile hydraulics. The integrated electronic switches (NPN or PNP) can be preconfigured ex-works. The P01 is available for pressure ranges from 0...10 bar to 0...1200 bar, whereby a switching accuracy of 1 % of the measurement range end value can be achieved. The maximum permitted media temperature totals 150 ºC; the ambient temperature totals 125 ºC. The parts coming into contact with media have been produced from stainless steel (1.4548) and guarantee, in combination with the welded thin-film measurement cell, maximum media compatibility. Optionally, a damping device can be integrated into the media access.

RNA offer as part of a total package the design and manufacture of bespoke handling systems which include vision systems and pick & place handling units often combined with vibratory bowl feeders. From a vision inspection system for checking out of tolerance components, counting systems for bagging machines, utilising the latest pneumatic and electric linear slide systems RNA can supply a system to move manipulate and handle your components.

AFS corona generators are THE standard for foil extrusion and the packaging industry. It is not without reason that the largest machine manufacturers opt for AFS as their standard equipment. The initial investment cost of any system is only part of the total running costs over the life time of a machine. Reliability and high efficiency results in minimum downtime and loss of production. The failure of a corona treater system can result in a total plant shutdown costing far more than the difference in price between a low quality and higher quality treatment system.

GFK Systems PUR Systems Fire Extinguishing Agents Cleaning + Disinfection Infothek About us Contact Products Polyester Foam Resins Polyester Resins Applications Service Quality Newsletter Contact, Glass Fibre Reinforced Plastics Polyester Foam Resins Compared to conventional matrix systems for fibre-reinforced products, UP foam resins offer material and weight reductions of up to 30 % thanks to their micro-cellular foam structure. In simple sealed moulds, glass fibre reinforced plastic components that are smooth on both sides are produced cost-effectively under a vacuum in comparatively short cycle times. The production of sandwich components resistant to bending, with a foam core, and the direct integration of metal reinforcements and threaded elements – for example for large vehicle components – has also proven itself. Typical properties Dense matrix / composite of approximately 0.6–0.7 g/cm³ / 0.7–1.2 g/cm³ Fibre content 20-50% of total weight Moulded part mass per unit area of 3000–5000 g/m² Flexural modulus of elasticity 3000–8000 MPa Bending resistance of 35–185 MPa Impact resistance of 35–65 KJ/m² (with 20–35% glass content) Reinforcing materials: Continuous glass fibre mats Composite glass fibre and fleece mats Natural fibre mats Special formulations and versions Systems with long processing times for very large components Foam resin formulations with elevated dimensional stability under heat Systems for fibre-reinforced components with a high level of characteristics Coordination with gel coat / top coat for surface refinement Flame protection formulations Electrical industry: UL 94 V0 Rail vehicle construction: DIN 5510 (S4, SR1, ST2)

The CETATEST XS is a compact, fully automatic leak tester for the detection of leaking parts within the cycle time of the production process. The tester is designed for leak testing of small-volume test parts and short total testing times. It is equipped with a gauge pressure sensor, through which the leak-related pressure decay is detected during the measurement time (relative pressure method). Using the application software CETA Soft XS the parameterisation of the test programs is carried out. Measurement results and pressure variation curves can be recorded. Typical applications: Leak tests which require a large measuring range.

Electrophoresis and Powder Painting is performed by a fully automated new generation painting system Pre-treatment Preparation of the surface to be painted is the key to successful painting, ensuring adhesion of the layer of paint and resistance to corrosion. Parts are pre-treated non-stop in a tunnel divided into eight stages, using environmentally friendly chemicals; the plant has already been prepared for use of the new nanotechnologies. Pre-treatments: Pre-degreasing Degreasing Rinsing Rinsing Activation Phosphatizing Rinsing Demi-rinsing Electrophoresis Electrophoresis painting is a painting surface treament which gives parts made of iron, steel and other alloys (electrical conductors) improved ability to resist corrosion. It is characterized by uniform depositing of epoxy resin on the surface of the part, ensuring long-lasting good protection against aggression from chemical agents and other factors; it also ensures improved adhesion of top coats of paint. Electrophoresis painting offers several important benefits: Uniform thickness and total covering of all parts, including sharp corners. Ability to control the thickness of the paint by adjusting application voltage and time and paint temperature. Thicknesses of 15 to 40 µ may be obtained, depending on the type of paint (the newest paints can even reach thicknesses of 60 ÷ 70 µ). Excellent resistance in saline mist tests, more than 500 hours, thanks to crystalline phosphatization pre-treatment. Good appearance and therefore top quality finish: the coating of paint is distributed perfectly over the surface. Following electroplating, treated elements are rinsed with ultra-filtered water at the rising unit in the circuit, permitting near-total collection of the paint that adheres to the elements but has not been electroplated. Electrostatic Powder Painting Powder painting is a surface finishing treatment for parts made of metal (aluminum, steel etc.) and alloys characterized by electrostatic application of powder paint which is then polymerized in a kiln. Powder painting prevents corrosion and makes the objects treated resistant to chemical and atmospheric agents. It also permits creation of a vast range of different surface colors and effects: orange-peel, embossed, hammered, etc. The powder painting procedure is ecologically sound because it significantly reduces risk to workers and the environment. Powder painting, electrophoresis or sanding: our mission is achieving excellence in our work through advanced technologies and careful choice of materials. This great care and commitment allows us to pass on the savings resulting from quality and durability to our customers.