Tools dies - Import export

Scope of delivery: 1x ball unit table 6x freely positionalable stop bar – long 4x freely positionalable stop bar – short 1x set of bolts anti-tilting Load capacity for tools, dies, injection moulding tools, assembly goods etc. up to: 500 kg – higher loads possible with ball units 022.100 Purposes Setup and dismantling, internal transport, flexible work table e.g. in toolmaking, can be used for forklift trucks, pallet trucks or pallet jacks Advantages Reduced set-up time, safe, flexible, universally applicable, simple and fast handling Safety at work flexible fall protection for conveyed goods, simple and quick tilt protection, stop bars freely positionable in the grid The SUTTY has a CE mark – Quality, made by Schulz!

BPE-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm² for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-062-D18V - battery hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPP-1303-D18V - battery hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 38 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPP-1302-D18V - battery hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 32 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPP-1301-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 26 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-130-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-062-D18V - battery hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm²1 for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-035-D18V - battery hydraulic crimping tool, 35 kN, CU150mm²1 for exchangeable dies series "35", "4" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-035-D18V - battery hydraulic crimping tool, 35 kN, CU150mm² for exchangeable dies series "35", "4" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

Instead of mounting one or more Transporters to each die, the PSKS features one unit only – mounted directly to the face of the bolster. A heightadjustable mounting bracket allows flexible usage with multiple tools and dies. The only extra thing needed will be scrap trays in different sizes On the left and right end of the system, heightadjustable brackets with linear bearings support a crossmounted aluminum profile. The profile is fastened with standardized clamping brackets and will transfer the motion over the whole width Numerous trays can be mounted. Two rugged nylon Ushape clamps are permanently fastened to each of the trays. The fasteners are designed to slide and fit snug onto the aluminum profile so that exchanging of trays is just a matter of seconds. The length and width of the tray is determined by the size of the die slot.

HP-60-H - manual hydraulic crimping tool, 55kN, CU185mm² for exchangeable dies series "60-H", "5" Two stroke hydraulic system for fast forward Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.

Screw extractor Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site

Screw extractor Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site

Adjustable tap wrenches, zinc die cast: No. 1: M 1-10 | 1/16-3/8 | G 1/8 No. 2: M 4-12 | 5/32-1/2 | G 1/8 Die sctocks: 20 x 5 | 20 x 7 | 25 x 9 | 30 x 11 | 38 x 14 Tap holder ratchet: M 3-10 | M 5-12 Thread pitch gauge Screw extractor Brand: Baer Tools (Germania)

Thread pitch gauge Screw extractor Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site

Thread standard: Metric, ISO DIN 13 Type: Round die Application: For brass Material of product: HSS Spiral entry: yes For materials: Brass (short and long chipping) Tensile strength up to: Standard: DIN 223 Tolerance: ISO-6g Special geometry for brass. Lapped for sharp cutting edges, smooth surface and increased tool life time. Round dies are cylindrical and are used for making external threads in one operation. They have - depending on the size - three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Dies are used to cut screws, nuts and threaded rods in everyday use. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or to a drill. The dies can usually be used on both sides and have a perfect cut. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads.

Thread standard: Metric, ISO DIN 13 Type: Machine nut tap Application: General use Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 850 N/mm2 Standard: DIN 357 Tolerance: ISO2/6H Maschine Nut tap for through holes with long shank for taking some thread cutted nuts. For thread depth up to 1,0 times diameter. Also useable for thread cutting in awkward places. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Undersized diameter 4H Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO1/4H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Fine Tolerance 4H (ISO1) for close fit bolt connection. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Oversized diameter 6H+0.1mm Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H+0.1mm Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. + 0,1 mm oversize for electroplating allowance ≈ 25 µm thickness. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Oversized diameter 7G Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO3/7G Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Tolerance 7G – allowance for distortion caused by heat treatment. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Zirconia (ZrO2) Ceramics have the highest toughness and strength at room temperature of all the advanced ceramic materials. At present, it has been widely used in grinding balls, dispersion and grinding media, nozzles, ball valve seats, zirconia molds, micro fan shafts, optical fiber pins, optical fiber sleeves, drawing dies and cutting tools, wear-resistant knives, and other room-temperature resistant Grinding parts and so on. Zirconia is widely used in the fields of the thermal barrier layer, catalyst body, medical treatment, health care, textile, and so on. This dense advanced ceramics material is usually precision ground using conventional diamond cutters and wheels. Machines used for precision grinding include: Surface grinders CNC milling machines Jig grinders Centerless grinders CNC lathes ID grinders

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Overlengthed (long shank) L=150 Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Overlengthed (long shank) L=120 Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Overlengthed (long shank) L=100 Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: For long-chipping materials Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Especially for usage on automatic lathes and multi-spindle machines. The 15° spiral flutes make the cutting flanks more stabile. Tap for machine use in blind holes. The fast spiral flutes provide good chip removal from the blind hole. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: For aluminium Material of product: HSSE Surface treatment: no For materials: Aluminium (long-chipping) Tensile strength up to: 350 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Due the cutting geometry specially recommended for applications in Aluminium (long-chipping). Tap for machine use in blind holes. The fast spiral flutes provide good chip removal from the blind hole. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Left-hand Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Left-hand (counter clockwise rotation). Tap for machine use in blind holes. The fast spiral flutes provide good chip removal from the blind hole. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants