Thermoplastic elastomers (tpe) - Import export

In the field of plastics we offer metal strips with PVC plastisol and/or organosol coatings, as well as polyamide plastics. PP (polypropylene), PE (polyethylene), PC (polycarbonate), PET (polyethylene terephthalate) and PLA (polyactide), TPE (thermoplastic elastomer), TPU (thermoplastic polyurethane) and others. These can be produced with a layer thickness of 5-200 μm Depending on the plastic, higher layer thicknesses can also be achieved. In addition, most plastics can also be equipped with antibacterial properties; of course in all colour variations. Although a one-sided coating more common, we are able to apply the same and/or different plastic adhesives for both sides.

We supply various types of SEBS - EPDM / Silicon and EPDM rubber products of the highest quality. SEBS is a thermoplastic elastomer (TPE) with hardnesses between 20 and 85 shore A. They are also called technical rubbers, synthetic rubbers or elastoplastics, but then added with syrene. In our range you will find a wide range of rubber products, but we are also happy to be of service with customized SEBS rubber. Advantages of SEBS rubber SEBS rubber is comparable to EPDM, but has the advantage that small series can be made for a favorable price. Another big advantage is the resistance of this material. For example, SEBS rubber is UV and ozone resistant and resistant to extreme heat and cold. This ensures that this type of rubber is very widely applicable. SEBS has been described by Greenpeace as an acceptable alternative to PVC in toys. Polyethylene (PE) and Polypropylene (PP) are the most commonly used building blocks for SEBS.

Designed as tubular support, vibration and noise absorber and protection element for rigid return lines entering the hydraulic reservoir Features ▪ For all commonly available Metric and imperial pipe and tube diameters from 6 ... 42 mm and 1/4 ... 1-1/2 in ▪ Easy installation ▪ Chemically resistant against oil and solvents Materials ▪ Bushing made of Polypropylene (PP) or Thermoplastic Elastomer (TPE) with a hardness degree of 87 Shore-A Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP)

Aqua Prof ® is a double layer hose with thread reinforcement. Black inner layer and yellow outer layer, grey marking line. Aqua Prof ® show no colorless, no kinks and no cracks while use any season. Made of thermoplastic elastomer (TPE), that is a better version of rubber, that provides large temperature range of use -50+70°C, outstanding elastic and deformation resistant qualities, resistance against UV rays up to 50 years. Packing method: the hose is winded up in a coil, fixed by a fastening tape and placed in shrink wrap.

Seal for plastic, aluminum and wooden structures Factory "Standart Prof"® produce seals for plastic, aluminum and wooden windows and doors profiles. The seals is made of thermoplastic elastomer (TPE) with excellent elasticity at subzero temperatures and low compression set at temperature higher 70С. High UV and ozone resistant. Wide range of colors according with RAL. Application area: for sealing various types of window and door blocks, assembly joints of double-glazed windows and other translucent structures. Specification: super elastic low temperature resistant profile based on styrene-ethylene-butylene rubber with increased resistance to ultraviolet and ozone. Does not contain harmful substances, has no smell, does not stain the profile. Complies with GOST 30778-2001. Transportation and storage conditions: profiles should be stored in a packe Packaging: the seal is covered with a silicone oil, winded up on a cardboard coil, put into a plastic bag then set into a cardboard box.

Introduction Dryflex PS are a range of thermoplastic elastomer (TPE) compounds designed for seals and pipe joints used in waste water applications. What are TPEs? TPEs are a family of polymer compounds which display elastic and rubber-like properties at their service temperature. Like thermoplastics, when heated and with the application of shear force, TPEs become free-flowing and when cooled regain their original structure and stability. Unlike the chemical cross-linking which occurs in thermoset rubbers, TPE involves purely physical cross-linking, which can be reversed via the further application of heat, this makes it possible to re-use all production waste and end of life products can be easily reprocessed. Product Assurance We support our customers by proving the performance of our products via relevant testing and working with industry standards. The Dryflex PS grades meet the requirements of EN 681-2:2000, the European Standard EN 681-2, Type WT. This testing allows our cus

What is Dryflex Green? Dryflex Green is a family of thermoplastic elastomer (TPE) compounds containing raw materials from renewable resources such as plant and vegetable crops. So far we have developed several series with amounts of renewable content to over 70% (ASTM D 6866) with hardnesses from 50 to 80 Shore A. Why use biobased? Plastics are predominantly a by-product of oil, a diminishing resource. We are therefore seeing increasing demands to look at how we can work with biobased, renewable materials and bring new opportunities for sustainability. Utilising raw materials that are derived from renewable vegetable crops, that are responsibly grown, can contribute to an improved LCA (Life Cycle Assessment), which measures the environmental impact of all stages a product’s life from cradle to grave. Crops for industrial use can be grown in poor soil which is unsuited to food crops, avoiding food crop displacement and improving biodiversity. The planting of these crops can also hel

Dryflex CS is a range of thermoplastic elastomer (TPE) compounds, based on SEBS. The range has been engineered to deliver optimised compression set performance. The raw materials used to manufacture Dryflex CS compounds are compliant with major food contact regulations (food contact statements available on request). The compounds also offer excellent organoleptic performance. What is Compression Set? Compression set is the measure of permanent deformation remaining when an applied force is removed. A TPE sample is compressed to a specific deformation, for a specified time and at a specific temperature. The compression set value is the percentage of the sample that fails to recover to its original height and is an important performance indicator for applications such as seals, flexible connectors and gaskets. For a 40 shore A hardness TPE, typical compression set values are 65 to 70 percent, with the Dryflex CS range this is reduced to 40 percent (22 hours at 100 degree). Key Chara

We have developed a range of Mediprene thermoplastic elastomers (TPE) for plunger seals in single-use syringes. The TPE seal, which is mounted on the end of the plunger, needs to provide a leakproof seal with the syringe barrel. As ease of use for the medical practitioner and patient comfort are also key requirements, the seal helps to optimize plunger movement for accurate dosage control and ease of injection. Originating from medical raw materials with high biocompatibility status and compounded under clean conditions, Mediprene TPEs are the material of choice for medical customers who want to maximize the probability that their devices will pass relevant medical tests. The raw materials in these compounds comply with food contact norms like FDA 21CFR and Commission Regulation (EU) No 10/2011. All polymers used have passed tests according to USP class VI and the paraffinic oil has passed the USP Mineral Oil NSF H1, reg 125038 and also the European Pharmacopeia, liquid paraffin. Fo

Introduction Mediprene BM is a range of thermoplastic elastomers (TPE) optimised for medical blow moulding applications. What is blow moulding? Blow moulding is a manufacturing process that is used to produce hollow parts such as bottles, balloons and bags. The process begins with melting the TPE and forming it into a tube, called a parison. The parison is clamped into a divided mould, the tube is pinched at one end, welding it together and then air is blown into it. The air pressure inflates the TPE out to match the mould cavity. Once the TPE has cooled and hardened the mould opens and the part is ejected. Mediprene BM TPE We have designed the Mediprene BM TPE compounds to have high melt strength, giving time to close the mould around the extruded parison while allowing sufficient stretchability during inflation. They also offer good welding in the pinchoff area of the blow mould. They can easily be coloured and give a smooth surface to the finished part. Applications The TPE can

Lifoflex FLAM are a range of halogen-free flame retardant thermoplastic elastomers (TPEs) designed to meet the most demanding applications where resistance to ignition and burning are important features. Lifoflex FLAM compounds contain additives to give them better resistance to burning compared to general TPE grades. The range includes halogen, chlorine and antimony free grades which are low smoke and compliant with the Restriction of Hazardous Substances (RoHS) directives, offering flame retardancy without the use of polybrominated diphenyl ether (PBDE). Lifoflex FLAM 600 series Flame retardant TPE, halogen free, fulfils the specification of UL 94 V0 with 3mm wall thickness. Easy processing by injection moulding and extrusion. Lifoflex FLAM 700 series The Lifoflex UV FLAM 700 series fulfils the highest specifications of flame retardant materials and can be used for railroad applications. A profile tested to DIN 5510-2:2009-05 (preventive fire protection in railway vehicles), rec

injection molding TPE compound,eco-friendly and recycable

Thermoplastic elastomers for the automotive, cable industry, medical devices, children's toys, seals, hoses. Standart Prof ® Factory develops thermoplastic elastomers with required qualities for automobile, building, agriculture, sport, shoe, medicine, children goods, food, household appliance and packing industries. All our raw thermoplastic elastomers are developed by our own engineering laboratory and pass the strict quality control. Standart Prof ® Factory thermoplastic elastomers draw a great adhesion to plastics РР, РЕ, PS, ABS, PA. Have wide hardness range by Shore scale, easy to recycle, low energy consumption, easy coloring and short cycle time. Packing method: 1 ton in a cardboard box or 25 kg in a plastic bag.