The works technical - Import export

TECHNICAL DEFINITION Ready-to-use surface filler paste for filling interior holes and cracks. COMPOSITION AND APPEARANCE Water, calcium carbonate, sand, resin and various additives. SUITABLE SUBSTRATES All types of interior substrates : concrete, cellular concrete, cement, breeze block, brick, plasterboard, plaster tiles, plaster, old paint. COVERING Primer coat, smooth surface filler, wall coverings, paint REFERENCE DOCUMENTS • Filler meets EN 16566 standard • DTU 59.1 : Paint work TECHNICAL CHARACTERISTICS • Density : 1.5 • Dry extract : 82 % STORAGE 9 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. APPLICATION Applied by hand using a filling knife or spatula. The thickness is 2 cm; to fill deeper holes, build up the filler in several steps The maximum thickness will be 1 cm per coat.

TECHNICAL DETAILS Powder filler for all types of interior filling work on uneven substrates. SEMIN HIGH BUILD FILLER has very good filling properties. SUITABLE SURFACES All types of interior surfaces: bubbled concrete, untreated concrete, cellular concrete, irregular plaster, heating ceiling, terracotta tiles, uneven substrates... Covering After the filler has dried completely, suitable for covering with all types of plaster-based coatings, thick coatings, wall paper paste, wall coverings. REFERENCE DOCUMENTS • Filler complies with standard NFT 30 608 • DTU 59.1 : painting work • Technical notice CSTB N°9/99-681 TECHNICAL CHARACTERISTICS • Granulometry : up to 0.5 mm • Adhesion : complies with NFT 30 608 • pH : neutral • Usage time for batch : 24 hours PACK SIZE 25 kg bags on shrink-wrapped pallet. APPLICATION May be applied manually with a smoothing trowel or coating blade, or mechanically by spraying then manual smoothing. THICKNESS OF APPLICATION Up to 5 mm in one pass.

COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin, cellulose fibre and various additives. The mixed paste is white in colour. REFERENCE DOCUMENTS • DTU 25.41. Standard DIN 1168 • DTU 59.1: painting work • NF EN 13963 TECHNICAL CHARACTERISTICS • Granulometry: fine • Adhesion: complies with NFT 30 608 • pH: neutral APPLICATION • SEALING PLASTERBOARDS WITH ROUNDED EDGES Apply a first pass by filling the joint deeply, apply a second pass after 1 1/2 hours to smooth and finish the joint. Filling and bonding (if tape) in one pass. And finishing is possible in a single layer. • FILLING, ASSEMBLY, SEALING Dilute with 45% water. 2.2 l to 2.3 l water per 5 kg bag or 11 l to 11.5 l for 25 kg. Open bevelled cracks or rifts. Apply with a putty knife or spatula. Completely fill up the part to be filled, smooth carefully. Time of use: 45 min. Hardening: approx. 1 hour.

With more than 36 years’ experience, we generate innovative solutions that meet – and exceed – your brand’s goals. Our expert engineers, sculptors, painters, architects, graphic designers, and technical team work closely with clients to identify your needs and deliver both creativity and quality. Our experienced sculptors in the field of sculptures, reliefs, busts and monuments decorating cities come out of their hands! We use squares, parks, roads, public buildings as a means of historical and cultural transfer, and we realize successful sculpture and monument projects with years of experience and the talent of our artists. We use materials that are most resistant to outdoor conditions and time, and we prepare the works for visiting and presentation with our post-production assembly team. We transform design into reality in our world class production centre equipped with the latest in technological equipment.

With more than 36 years’ experience, we generate innovative solutions that meet – and exceed – your brand’s goals. Our expert engineers, sculptors, painters, architects, graphic designers, and technical team work closely with clients to identify your needs and deliver both creativity and quality. By combining innovative solutions with high technology, we develop ergonomic and economical designs that never compromise on quality. We transform design into reality in our world class production centre equipped with the latest in technological equipment. we offer distinctive 3D design that marries creativity with quality. We have been making dreams come true in 3D architectural theming and advertising sector since 1984, with international design approach, production in European standards and cost-effective solutions! We produce theme parks, advertising models, city furniture, stage decorations and sculptures!

With more than 36 years’ experience, we generate innovative solutions that meet – and exceed – your brand’s goals. We offer distinctive 3D design that marries creativity with quality. Our expert engineers, sculptors, painters, architects, graphic designers, and technical team work closely with clients to identify your needs and deliver both creativity and quality. Our experience in 3D to start-up and advertising industry, experts in the field of graphic artist, architect, sculptor and production team, our special approach to your company and your target audience are one of Turkey's leading design and project implementation company! If you want to make the most profitable advertisements. Using only the best materials and equipment in every single project, we develop long-lasting works that withstand both weather and time. With our experienced teams and world class vehicle fleet, we ensure that your products are delivered without any damage or issues.

With more than 36 years’ experience, we generate innovative solutions that meet – and exceed – your brand’s goals. Our expert engineers, sculptors, painters, architects, graphic designers, and technical team work closely with clients to identify your needs and deliver both creativity and quality. With our team of architects, engineers and sculptors with unlimited imagination, approaching every design with the same discipline and philosophy, we carry out the project, construction and application works of comprehensive architectural monuments. In addition, we produce special decorative sculptures for the place. Through creativity and innovation, our expert staff use their comprehensive experience in design technology and contemporary art to create designs that push the boundaries and propel your brand forward. If you want to work with an expert team in your architectural sculpture and monument projects and get quality work at an affordable cost, let's meet!

If you need some extra space for security officers, we can customize the portable security cabins and kiosks to fit your specific requirements. Prefabex modular security cabins and kiosks are completely built and finished in the factory and transported to your site with so much care. Our Portable Modular Cabins and kiosks can be modified and customized to meet your own requirements and budget. Prefabex portable cabins and kiosks are modular, portable and fully customisable, ideally suited for use as Security Huts, Guardhouses, Ticket Kiosks, Security Gatehouse, parking booths and much more. All our cabins and kiosks are constructed from steel structure and have a sandwich body structure which adds to the strength of the cabin. Our aim is to build the most beautiful, high quality material, durable, low-cost and unique Security kiosks and portable cabins in the industry. Our technical support staff works closely with design, engineering, and production.

You are already using flexible shafts but you do not know which type? This is a selection of possible connections: - connections for working shafts - connections for technical shafts - types ready to connect (e.g. drilling machine etc.) Our standards of flexible shafts in detail: - Type S - Type B, C, M - Type D - Type AW You know your type of flexible shafts and would like to send us an inquiry? Click here: Inquiry You are looking for inner cores or protective casings by the meter? Click here. You do not have any experience? No problem, please c ontact us directly. We will guide you and will be happy to ease your work with our various products. We will help you to find the flexible shaft you need.

REVOLVING CROSS CUT SAW WITH NC PROGRAMMING SYSTEM GAMA 65 K3 Fully automatic circular saw for positioning and controlling via touchscreen with length measuring system EXENSO COMFORT (Pusher system) Application Length stop system (pusher operation), revolving table and sawblade inclination via servo - motor for positioning ( cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Technical Equipment : - Motor rating 8,1 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT – sawblade 650 x 30 x T 54 - Dust extraction spigot 125 / 80 mm - Revolving table 20° - 160° - Horizontal material clamping system, right - left - pneumatische Kappvorrichtung über ZweihandSteuerung/vollautomatisch

The FireBird® Pro S Gold Edition with mechanical setting stroke adjustment. When setting a blind rivet nut size of the same length in consistent material thicknesses constant setting stroke should be used. The setting stroke corresponds to the distance the mandrel is drawn into the nose piece during the setting process and thus how far the blind rivet nut is upset. With the setting stroke adjustment this path can be set mechanically on the setting tool. Customer benefits of setting stroke adjustment: • Device control via setting stroke adjustment guarantees a constant height of the blind rivet nut after setting • Stepless setting of the setting stroke • Setting stroke adjustment is preferred above all by experienced users and for large production runs Technical data, working range and advantages are analogous to FireBird® Pro Gold Edition More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!

Equipped and/or empty socket combination and fuse (distribution) box solutions for factories, construction sites, workshops and working environments...Industrial sockets with CEE standard and fully equipped ready to use products are currently considered important for technical working environments such as factories, workshops and construction sites.Therefore it can be equipped with "socket combination boxes" and "fuse distribution boxes" as well as modular alternatives that can meet rapidly changing and continuously increasing requirements, plus flexible, sound, ergonomic, safe and aesthetic design options are rendered according to the requirements and preferences for living and working environments.

Manufacture of uniforms for physiotherapists

Quickly binding building gypsum for direct application. It is used for filling holes, mounting electrical installations, skimming rough coatings, or other proper substrates with normal bearing capacity. Application: • Fixing of electrical cables • Suitable for complete skim coating • Suitable for bonding gypsum ornaments Advantages: • Compatibility with all types of masonry and concrete works • Excellent adhesion • High resistance • Fast gathering of strength • Easy and effective work TECHNICAL INFORMATION: Mixing Ratio Coverage Consumption Bags per pallet Pallet weight (gypsum/water) 5 kg 1/0.55 ~ 5 m2/ 5 kg 1 kg / m2 / 1 mm 120 pcs 600 kg 25 kg 1/0.55 ~ 25 m2/ 25 kg 1 kg / m2 / 1 mm 40 pcs 1000 kg

FIX is a gypsum-based adhesive that is used for direct fixing of all types of plasterboards on walls made of concrete, aerated concrete, bricks, etc., in premises with normal humidity. Application: • Drywall linings without supporting structure • Shaping of window and door openings • Filling of cavities greater than 3 mm • Application in premises with normal humidity Advantages: • High strength • Fast gathering of strength • Excellent traction with the base • Easy and effective work TECHNICAL INFORMATION: In compliance with EN 14496:2017 : Type 3B • Paper bag: 25 kg • Mixing Ratio: ~ 13 l water : 25 kg • Coverage: ~ 5 m²/ 25 kg • Consumption: ~ 5 kg/m² • Bond strength: 0.23 MPa • Bags per pallet: 40 pcs • Pallet weight: 1000kg

Our team of engineers thoroughly researches each project and designs the most appropriate solution for each customer. The technical office works in accordance with the needs of the customer or independently to meet a stated requirement. We offer complete solutions from design, manufacturing and quality control to on-site commissioning. We have a flexible structure, a dependable supplier network, technical training, and in-depth project knowledge. ​ Our highly qualified technical department works with advanced 3D design programmes and we optimise our designs by means of finite element calculations, eliminating uncertainties and ensuring the correct functioning of each application.

The KM-100 and KM-200 baler is the result of rigorous work and technical research developed by competent engineers from KOM SILAJ. Designed mainly for the silage baler it also allows to treat other materials like; beet pulp, corn silage and all other fodder crops to facilitate the work of farmers.

The KM-1000/1200 baler is the result of rigorous work and technical research developed by competent engineers from KOM SILAJ . Designed mainly for the silage baler it also allows to treat other materials like; beet pulp, corn silage and all other fodder crops to facilitate the work of farmers.

We develop and manufacture all kinds of 100% customizable textile products. We carry out a VERTICAL service throughout the manufacturing process until we send the finished product wherever the client needs it. We work with VERY TECHNICALLY PREPARED suppliers to be able to respond to any customer requirement. We have MINIMUM MANUFACTURING of 50 units per color/model in order to offer the highest QUALITY.

While CBD products for dogs and cats are now available in abundance on the market, we finally invite you to discover an oil specially designed for ponies and horses! Because your equine deserves the best for him and for his physical form, our teams have put all their technical knowledge to work, in order to offer you a CBD oil specifically adapted to the needs of horses and ponies. To date, this type of product was lacking on the market and many of you asked for it, so WePet decided to offer you a totally natural answer to support and improve the health of your horse! In WEPET CBD oil for horses, you will find 5000mg of CBD for a volume of 100ml : accompanied by a syringe , it is therefore very easy to provide your pony or horse with a significant dose of CBD, 'a simple and secure way. Embodying a real revolution in equine health,

The most intense areas in terms of energy losses of workshops and sales areas are their outer doors. Heated air in the winter and the costly chilled air in the summer are lost through these openings. The larger the doors, the higher the costs due to uncontrollable changes between indoor and outdoor temperatures. It also increases the possibility of airflow between the doors. The ambient temperature is kept under control with the help of air curtains. With this, energy costs decrease and working conditions improve. Technical Features Model AIR WALL 20 Power 21,7 kW Natural Gas Consumption 2,30 Nm3/sa Gas Connection 20-55 mbar Air Flow 1400x3 m3/sa

We talk about joint quality management. That does not only concern the department responsible for that particular task but all levels of the company, i.e. several departments jointly. When a new customer project is being started or when an existing project is worked on, technical departments join in to discuss the project. Inquiries, feasibility studies, new orders, questions on how to meet customer's requirements, complaints, … all these topics are discussed during project discussions with those responsible. Sales people, quality control staff, designers, cost calculators, tool makers, process technicians – all these specialist join together, are integrated into the project and work on it together. It is this project-oriented approach that makes it possible for us to give the customer reliable information.

Model No.: LSP-4092BD; Constitue: 1 control box, 4 sensors,1 LED monitor, a string of power lines; Function: A. Buzz indicator (buzzer built-in the display); (1)1.5m—0.8m: Bi,Bi,Bi; (2)0.8m—0.4m: Bi,Bi,BiBi (the closer, the faster); (3)0.4m—0.0m: BiBi…(continuous beeping); B. Visual indicator; (1)2.5m—0.3m: display the distance accurately; (2)0.3m—0.0m: display 00 and you must to stop; (3)Five sets lights in three colors (green denotes safe, yellow denotes warning, red denotes stop), two sides lights indicate the orientation of obstacles, the number indicate the distance between obstacle and vehicle. Technical specification: Working voltage: 10V~15V OR 24V; Working current: ≤200mA; Max Power: ≤4W; Ultrasonic frequency: 40KHz; Working temperature: -30℃~ +70℃; Alarming volume: ≥63dB; Alarming distance: 1.5~0.1m; Display distance: 2.5~0.3m.

PRODUCT INFORMATION ACK 420 S is designed for the strait or angular cutting operations of the large size of profiles made of aluminum and PVC materials by means of Ø 420 mm of saw blade. Two-hand run safety operation Location points at 75°,60°,45°,30°,22.5°,15°,0° both left and right Pivoting range from -75° left to +75° right infinitely adjustable Hydro-pneumatic saw feed Adjustable back fence for most effective use of the saw blade Adjustable saw blade feeding speed Manually opening safety guard Interior LED lighting STANDARD ACCESSORIES • Equipped with saw blade Ø 420 mm • MKN 301 roller conveyor (3 m) • 2 x vertical clamps • Spray saw blade lubrication system (ACK 420S) • Air gun OPTIONAL ACCESSORIES • Additional saw blade Ø 420 mm • 2x horizontal clamp • VCE 1570 Chip vacuum extractor • DKN 300-450-600 conveyor • SKN 300-450-600 conveyor • Laser marker set for 90 ° of cutting operation • Pneumatically working top guard Videolar TECHNICAL SPECIFICATIONS 2.2kW 50/60Hz

Memcell classic The MEMCELL plant has been developed to run laboratory trial with minimized effort. The plant is suitable for membrane screening, cleaning examinations, lab trials and quality management. All common flat sheet membranes can be used. The plant is suitable for the following processes: Ultrafiltration Nanofiltration Reverse osmosis The flat module corresponds in his hydraulic properties to a spiral wound element. So, examinations with the flat module can be used for up-scaling to pilot plant sizes. The flat cell is available with various spacers (30-44-80mil); to run the plant with another spacer, only the middle part of the test cell has to be changed. On permeate side, there is a porous sinter plate to guarantee a steady permeate flow. So, a reliable scale-up is possible. For membrane manufacturer or technical institutes, the MemCell is available on request with parallel or seriell connection of more than one test cell. Technical data: Working pressure 64 bar (standard)

The 7-axis arc welding robot V6LS from the FD series impresses with its slim design and an expanded degree of freedom, which enables a constant torch orientation when immersing in tight work spaces. Compared to the V6S, the V6LS has an extended arm, which is why the range is increased again. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P-point): R 2006 mm Max. payload: 6kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 6000 W Weight: 316 kg

The 7-axis arc welding robot B4S from the FD series is compact and, thanks to the integrated cable routing, offers optimal protection during the work process. The extended degree of freedom enables a constant torch orientation when immersing in tight work spaces. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P point): R 1435 mm Max. payload: 4 kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 3550 W Weight: 189 kg

The 7-axis arc welding robot V20S from the FD series is the optimal robot for medium-heavy loads. The extended degree of freedom enables a constant torch orientation when immersing in tight work spaces. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P point): R 1710 mm Max. payload: 20kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 6600 W. Weight: 321 kg

The 7-axis arc welding robot B4LS from the FD series is compact and, thanks to the integrated cable routing, offers optimal protection during the work process. The extended degree of freedom enables a constant torch orientation when immersing in tight work spaces. In addition, the FD-B4LS offers an extended arm compared to the FD-B4S and thus a larger working radius. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P-point): R 2008 mm Max. payload: 4 kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 5650 W Weight: 321 kg