Test rooms - Import export

E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Other information Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0 E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E2 micro E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors. E2 micro For restricted spaces One and two-piece E-Chains®, from 5 mm inner height High torsion resistance Smallest inner heights and bending radii Mounting brackets with strain relief optional Small pitch for silent operation Cable-friendly interior Low weight Large pins for a long service life Favorable internal/external dimensions ratio B07/B09 in two parts - Can be folded out in outer radius due to integral hinges Typical industrial sectors and applications General construction machinery Models (micro E-Chain®), Automatic doors Vehicles Measuring machines Electronics Handling systems Pick and place robot iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0

We have been manufacturing UP machines / components and beam delivery systems for over 20 years.Benefit from our experience and let us do your demanding assembly or adjustment work.Assembly / adjustment of optical systemsAssembly / adjustment of mechanical precision systems.cleaning.Clean room assembly.Functional test.

With our 6 kW / 7 kW smart connected load banks , test all levels of electrical and thermal redundancy in your data centre (main path / secondary path and backup). Collect data (P/U/I/Delta T) thanks to their supervision software and thus bring added value to your tests. Also take advantage of their low delta T to test your computer rooms in real conditions. Our 19-inch rackmount load banks are specially designed to meet the requirements of data center “IST commissioning” tests. They are suitable for rooms that are newly built, at the end of renovation or undergoing maintenance.

Rentaload offers the first range of rack load banks 100% dedicated to data center testing. Two versions are available: single- phase for 7 kW load banks, three- phase for 11 kW load banks. These load banks have proven themselves: today they have a reliability rate unrivaled on the market . They are used both for commissioning tests and for computer room ballasting. For the record, the design of the 7 kW rack load bank was made by a designer currently working for Apple. A rather avant-garde design for a very industrial product. In particular, its transistor-like grille and its pretty leather handles.

Rentaload offers for commissioning tests on datacentres the rental of SMART and connected load banks . This equipment makes it possible to test all levels of electrical and thermal redundancy of infrastructures, from the end of construction, renovation or during maintenance operations: Test of the main electric chain; Emergency electrical chain test and emergency equipment test; Test of the room cooling system. Rentaload also offers, in addition to the rental of load banks, a whole range of associated services (delivery, installation and connection, assistance with tests or complete commissioning). Today, Rentaload’s expertise in this type of test is known and recognised throughout Europe.

Steelsorba is a high specification acoustic solution for sound absorbing industrial panel for walls and ceiling linings. It is designed to reduce the problem of noise reverberation. Steelsorba panels are a sound absorbing material resistant to mild impact and are simple and quick to install. All component parts of the system can be modified at installation to suit. Suitable areas for treatment are factories, workshops, plant rooms, test bays and other industrial environments. Acoustic Performance Installation Walls Odd leg U channels are plugged and screwed to the wall. Insert the panel into top channel and push panel flush to wall then lower into bottom channel. Use bottom channels vertically as capping to cut wall ends. Ceilings Odd leg U channels are plugged and screwed to the soffit. Insert the panel into top channel and push panel flush to soffit then slide into bottom channel. Use bottom channels as capping to cut ends. Use pop-rivets or screws to hold panels at ends as...

Cabins, also known as acoustic test cabins or reverberation rooms, are essential for assessing the acoustic absorption properties of materials. These specialized environments are meticulously designed to measure sound absorption against frequency, evaluate acoustic performance, and determine material properties. Reverberation rooms facilitate the measurement of acoustic absorption capabilities by allowing sound waves to reflect and resonate within the space. Acoustic test booths are tailored to evaluate specific materials or products, equipped with high-sensitivity microphones, sound sources, and measuring devices to accurately assess acoustic performance. Larger and specially designed acoustic rooms serve for broader-scale or specialized tests of material acoustic properties. Within these cabins, sound transmission loss (STL) and sound absorption measurements can be conducted, providing invaluable insights into material performance.

Cabins are used to determine the acoustic absorption properties of materials and are generally called "acoustic test cabins" or "reverberation rooms". These cabins are designed to detect the sound absorption properties of materials against frequency, measure their acoustic performance and determine their properties. Here are some of different types of cabins: ​ Reverberation Rooms: In these rooms, sound waves hit and reflect on surfaces and resonate for a while. In this process, the acoustic absorption capabilities of the material are measured. Acoustic Test Booths: These booths are designed to evaluate the acoustic performance of specific materials or products. They often include high-sensitivity microphones, sound sources and measuring devices. Acoustic Rooms: These rooms are generally large and can be specially designed. It is used for larger-scale or special tests of the acoustic properties of materials.

Alpha Cabins (Determination of acoustic properties of materials) Cabins are used to determine the acoustic absorption properties of materials and are generally called "acoustic test cabins" or "reverberation rooms". These cabins are designed to detect the sound absorption properties of materials against frequency, measure their acoustic performance and determine their properties. Here are some of different types of cabins: ​ Reverberation Rooms: In these rooms, sound waves hit and reflect on surfaces and resonate for a while. In this process, the acoustic absorption capabilities of the material are measured. Acoustic Test Booths: These booths are designed to evaluate the acoustic performance of specific materials or products. They often include high-sensitivity microphones, sound sources and measuring devices. Acoustic Rooms: These rooms are generally large and can be specially designed. It is used for larger-scale or special tests of the acoustic properties of materials.

Cabins are used to determine the acoustic absorption properties of materials and are generally called "acoustic test cabins" or "reverberation rooms". These cabins are designed to detect the sound absorption properties of materials against frequency, measure their acoustic performance and determine their properties. Here are some of different types of cabins: Reverberation Rooms: In these rooms, sound waves hit and reflect on surfaces and resonate for a while. In this process, the acoustic absorption capabilities of the material are measured. Acoustic Test Booths: These booths are designed to evaluate the acoustic performance of specific materials or products. They often include high-sensitivity microphones, sound sources and measuring devices. Acoustic Rooms: These rooms are generally large and can be specially designed. It is used for larger-scale or special tests of the acoustic properties of materials.

Cabins are used to determine the acoustic absorption properties of materials and are generally called "acoustic test cabins" or "reverberation rooms". These cabins are designed to detect the sound absorption properties of materials against frequency, measure their acoustic performance and determine their properties. Here are some of different types of cabins: ​ Reverberation Rooms: In these rooms, sound waves hit and reflect on surfaces and resonate for a while. In this process, the acoustic absorption capabilities of the material are measured. Acoustic Test Booths: These booths are designed to evaluate the acoustic performance of specific materials or products. They often include high-sensitivity microphones, sound sources and measuring devices. Acoustic Rooms: These rooms are generally large and can be specially designed. It is used for larger-scale or special tests of the acoustic properties of materials.

Cabins are used to determine the acoustic absorption properties of materials and are generally called "acoustic test cabins" or "reverberation rooms". These cabins are designed to detect the sound absorption properties of materials against frequency, measure their acoustic performance and determine their properties. Here are some of different types of cabins: ​ Reverberation Rooms: In these rooms, sound waves hit and reflect on surfaces and resonate for a while. In this process, the acoustic absorption capabilities of the material are measured. Acoustic Test Booths: These booths are designed to evaluate the acoustic performance of specific materials or products. They often include high-sensitivity microphones, sound sources and measuring devices. Acoustic Rooms: These rooms are generally large and can be specially designed. It is used for larger-scale or special tests of the acoustic properties of materials.

With our HPT heat pump test bench you can simulate humidity as well as temperature. The test stand is used for functional testing of air-to-water heat pumps according to DIN EN 14511. Current test systems on the market, which are used to test e.g. air-to-water heat pumps, are climatic chambers with a cooling, heating and humidification unit fixed to the roof. The disadvantage of this concept is that it is not possible to set a homogeneous temperature and humidity distribution in the cube-shaped room. Based on test engineering concepts in the automotive industry, EP-E developed a concept in which the air flows in a closed loop (loop design). The HPT heat pump test stand is a closed-loop test stand for functional testing of air-to-water heat pumps according to DIN EN 14511. The advantageous closed-loop design uses an insulated chamber with conditioning units for temperature and humidity outside the chamber.

The universal testing machine inspekt offers high-class mechanic precision, frame stiffness and modern control electronics. Customers also profit from the convincing cost/performance ratio. The top-quality, rugged machines can be used for almost any testing task. The size of the test room of the individual machines can be customized. It is also possible to add one or more test room. In combination with our user-friendly testing software LabMaster, standard-based and customer-specific tests can be easily implemented. Testing machine, testing software and our extensive range of accessories such as specimen grips and testing tools, extensometers or temperature control devices are optimally matched to each other and offer the ideal testing system for a wide variety of testing applications (tensile tests, compression tests, bending tests, peel tests,...). - Solid construction for highest measuring and control precision - Flexible design for versatile applications

Hotgen COVID-19 Rapid Antigen Test for Home, Applications, nasal Sampling, CE certified The Rapid SARS-CoV-2 Antigen test card from Hotgen is a Covid-19 self-diagnostic test. The set is used for the qualitative in vitro determination of SARS-CoV-2 antigen in human anterior nasal samples. It serves as a rapid examination in suspected cases of novel coronavirus, but can also be used as a confirmation method for the detection of nucleic acids in discharged cases. Fast and reliable test results within 15 minutes Simple nasal swab test for laypeople Store at room temperature Can be used anywhere Shelf life up to 18 months Test can be performed quickly and easily without special equipment File number of the special approval of the BfArM 5640 S 057/21 Certified CE 0123