Tensile test - Import export

Universal Testing Machine is a representative test equipment for physical properties. It is capable of measuring load, strength, elongation of products or materials such as rubber, film, plastic, metal, etc. - Frame Load Capacity (Max.) : 5kN - Main Load Cell : 5kN - Load Range : 50 (kgf) ◀(Up to 4-step conversion) - Column Type : Single Column - Load Accurancy : Less than ±0.5% - Crosshead Speed Range : 0.01 ~ 500mm/min - Load Resolution : 1/50,000 - Machine Controller : Touch Type Servo Controller(Position Control Type) - Test Category : Tensile, Tear, Peel, Compression, Bending, Repeat, etc. - Dimensions : 478× 650× 1375(H), 82kg - Main Power : AC 220V 2P, 50/60 - It is single column model that can be tested under 5kN. - UNITEST M1 is widely used for testing materials such as films, rubber, fibers, medical devices, biomaterial, and wires etc. - The main feature of the UNITEST M1 is that it requires a small footprint

One-column load stand, preffered for the transmission of compressive forces up to 500 N.

One-column test stand for manual transmission of compressive and tensile forces of up to 1000 N.

laserXtens Array HP features a measuring head incorporating seven fixed high-resolution cameras. The overlapping fields of view of the seven cameras are combined into a single large image, giving a very large measuring range.Advantages of laserXtens Array - laserXtens Array HP possesses an extremely large measuring range, combined with a resolution of 0.10 μm. - laserXtens Array HP has no moving parts and is completely maintenance-free. - laserXtens Array HP satisfies the requirements of Class 0.5 of ISO 9513 (Class B2 of ASTM E83). - Used for strain-rate-controlled tests to ISO 6892-1 Method A1 (closed loop) for gage lengths from 30mm. Different gage lengths can be set in fractions of a second. laserXtens Array HP can also measure transverse strain with no need for additional markings; biaxial measurement is additionally possible. Determination of strain distribution and strain at break as per Annex H of ISO 6892-1

In the laboratory of Istanbul Dokum, for all productions, chemical analysis, mechanical yield – tensile – elongation tests, and when required hardness tests, UT, MT and MPI tests are provided.

We have a skilled quality control team and a laboratory that enables us to carry out trials and tests to ensure the quality of raw materials and finished products. As soon as we receive the raw materials, we carry out the necessary tests to ensure that they comply with the specifications provided by the suppliers. Monitoring and controlling the manufacturing process Ensuring traceability of manufactured products Ensuring that finished products comply with CTRA standards and/or customer specifications by carrying out various in-process checks. Non-destructive testing Visual / Dimensional Polymerisation Destructive testing Calcination test (loss on ignition) > in-house Peel test (separation) > in-house Tensile test > carried out by an approved external body Bending test > carried out by an approved external body

We love a challenge so we are more than happy to take on special designs. We translate your specifications into top-quality products. In order to meet the most stringent requirements, we rely on our comprehensive machine park and on the production facilities run by highly specialized partner companies. These machines have been designed to manufacture both individual items and batches without any problems. Would you like to have more detailed information on our special designs? Why not contact us directly? We will be happy to assist you. Milling of profiles Special concrete designs Rings for placing Shore test specimens Milling of dumbbell test specimens for tensile tests Multiple test specimens according to DIN 53281ff Stainless steel rings for tests according to EN ISO 10563 Spacers for standard joints according to ISO 11600 Spacers for elongation test according to ISO 11600, made of aluminum or PMMA in various % values Feed mechanisms

In barrier film production we focus on creating basic films for thermoforming, having solid knowledge and experience in the field. This is how we present our films with special mechanical properties, which become transparent at the time of thermoforming. All these resistance and tensile properties are tested and monitored in our laboratories. Films can be used with a wide range of packaging equipment.

The test bar milling machine enables bar-shaped plastic samples to be produced for tension, pressure, bending and flexural impact tests in accordance with a wide range of standards. According to ISO 6259 , ASTM D 638 , ASTM D 1822 , ISO 16770 , 3 axis desktop CNC, cutting tensile samples from plastics, computer controlled, G-codes for samples according to customer request

Manual hydraulic cutting punch, 10 Ton force capacity , cutter based on customer request

Computercontrolled (CNC) test bar milling machine with installed machining programs and special clamping devices will prepare samples for tensile tests and other specific shaped sample required tests The CNC milling machine is a tabletop unit with protective doors. Preconfigured machining programs for all common sample shapes The allround enclosure ensures safety at the workstation The milling machine is optionally fitted with pneumatic clamping devices Test samples with a maximum length of 250 mm, a maximum thickness of 50 mm can be milled as standard. Optionally thickness of 100 mm is available. Delivered with workbench Test samples milled in accordance with standard dimensions Machined areas cooling with compressed air Highquality unit components guarantee long service time

The universal tensile tester is used for performing tension, pressure or bending tests. The classic application is the tensile test. This involves subjecting a sample to an increasing tensile load until it breaks. According to ISO 527 , ISO 6259 , ASTM D 638 , servo controlled , long travel extensometer , ball screw , double column , USB computer controlled , windows based software • - Easy operation and clear visualization (test curves, calculations) via integrated touch display 16″ • - Easy to change the grips via male-female connection • - Accuracy: ±0.5% of full scale • - Precise, self-cleaning ball-screw • - Brush-less servo motor quarantine maintenance-free operation • - Easy calibration of load-cell • - Socket connection of extensometer as standard option

Touch display, thermal printer included, izod, charpy, tensile impact test options, different pendulum energy based on customer request

The universal tensile tester is used for performing tension, pressure or bending tests. The classic application is the tensile test. This involves subjecting a sample to an increasing tensile load until it breaks. Servo controlled , long travel extensometer , ball screw , double column , USB computer controlled , windows based software • - Easy operation and clear visualization (test curves, calculations) via integrated touch display 16″ • - Easy to change the grips via male-female connection • - Accuracy: ±0.5% of full scale • - Precise, self-cleaning ball-screw • - Brush-less servo motor quarantine maintenance-free operation • - Easy calibration of load-cell • - Socket connection of extensometer as standard option

Destructive and non-destructive tests can be carried out on request in accordance with the applicable standards. Destructive tests to determine mechanical properties : tensile test impact test Non-destructive tests to examine the internal and surface condition of the castings: visual inspection (VT) Magnetic particle testing (MT) Ultrasonic testing (UT) Penetrant Testing (PT) Radiographic testing (RT)

Impact testing is used to determine material behavior at higher deformation speeds. AHP offers a wide range of pendulum Charpy/Izod impact testers for tests according to the relevant test standards. These pendulum Izod/Charpy impact testers cover a range from 0.5 Joules to 50 Joules for plastics testeing. These are available with digital touch displays and with a range of different options especially made for your tests (e.g. tensile impact tests for UPVC profiles, ….).

The tensile test and the maximum clamping force test is carried out with steel and aluminium, for steel screws of resistance class 12.9, while stainless steel, with screws of resistance class A2/70.Resistance values may be subject to changes

Zinc plating: white zinc plated with Chrome III with minimum thickness of 7mm (Fe/Zn 7 IV). The tensile test and the maximum clamping force test is carried out with steel screws of resistance class 12.9Resistance values may be subject to changes

Austenitic stainless steel A2: Aisi304Cu (EN 1.4567) Austenitic stainless steel A4: Aisi316Cu (EN 1.4578) The tensile test and the maximum clamping force test is carried out with steel and aluminium, for steel screws of resistance class 12.9, while stainless steel, with screws of resistance class A2/70.Resistance values may be subject to changes

Furthermore, we are an experienced partner for customized production solutions, in the field of atypical flanges, rings and special forged components. As your competent partner, we enable you to purchase your entire specification from one single source. As a trading and manufacturing enterprise, our know-how is there for your benefit. Our strong customer-oriented approach challenges our team’s experience to guarantee skilled support in every phase of business. We take pride in long-standing relationship with our customers and our manufacturers. In-house testing facilities We perform all mechanical and chemical tests according to the applicable standards such as: mechanical Tensile tests, hardness and impact tests (destructive testing), product analysis, PMI, UT, HIC (Non-destructive testing) or any other customer requirement.

Universal Testing Machine for methodical component and materials testing for forces up to 100 kN. Fields of applications are everyday industrial procedures in rough environments as well as in laboratories, in the fields of research and development or teaching. This technically mature product for static tests with modern measurement and control technology, the suitable right accessory and the innovative testing software TesTWinner® meets all requirements of modern material testing. In addition the model is equipped with the TesTController 850. The corresponding software TesTWinner® provides the user - besides to its free programmability - an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes, and much more. A wide application field is guaranteed by a comprehensive range of accessory.

Model: Nitrile VELVET BLACK (Premium) •made of “PURE NITRILE” and are flat packed (not stuffed) in premium packaging •have excellent test results (e.g.: elongation test (%): ø 500% | tensile strength (MPa): ø 20 MPa (standard: ≥ 14MPa) •Also available for small quantities (≥ 33 600 boxes) •can be completely flexibly adapted to your wishes in terms of number of pieces per box (100/200/300), implementation, delivery, etc •have all the necessary certificates (we'll be happy to send them to you on request), checked by the strict QC department of Curaden AG •Available in 4 sizes (Small, Medium, Large, X-Large). You determine the number of boxes per size •Are available in advance as samples to test and compare •Price on request

The zwickiLine testing machine is equally ideal for research and development as it is for routine quality assurance testing. Development and manufacture of the zwickiLine, including all mechanical, electronic, and software components—together with the comprehensive range of accessories — takes place at ZwickRoell's production facility in Germany, so all components work together seamlessly. Your benefits: - load range from 500 N up to 5 kN and with test-area heights from 565 mm to 1365 mm - Low weight, a small footprint and space-saving design - Suitable for tensile, compression, flexure and bending tests on different materials and components - Wide range of specimen grips and testing tools

The ideal system for individual testing situations and all applications. AllroundLine can be used for applications from all areas. A proven operating concept combined with flexible, modular load-frame design makes the AllroundLine an optimum solution for demanding testing applications, whether for quality control or for research projects. Development and manufacture of AllroundLine, including all mechanical, electronic, and software components—together with the comprehensive range of accessories—takes place at ZwickRoell's production facility in Germany, so all components work together seamlessly. Typical tests: - tensile test on metals (eg ISO 6892, ASTM E8), plastics (ISO 527), composites, rubber, ... - bending tests - flexure tests - shear tests - components tests

The HIT series offers pendulum impact testers for plastics. They are specifically designed for manufacturing and processing plastics. Designed with an accurate and reliable structure, these instruments are configured in the right range according to standards of use. They make use of carbon double rods for the pendulum and are capable of providing maximum stiffness in the impact direction. These pendulum impact testers deliver optimum concentration of masses at a specific point of impact. A single pendulum is integrated with a fast-change device therefor allowing faster, zero-tool pendulum changes. The HIT series are characterized by their easy to operate system and ergonomically built controls. Typical tests: - Charpy tests: ISO 179, ASTM D6110 - Izod tests: ISO 180, ASTM D256, ASTM D4812 - Impact tensile tests: ISO 8256 Methods A and B, ASTM D1822 - Dynstat bending and impact tests: DIN 53435

Representative Mediprene grades have been sterilized via: Ethylene oxide (EtO) Gamma Irradiation Steam / Autoclave Test Specimens for tensile tests were punched out of injection-moulded plaques. All mechanical test values refer to tensile testing of the material parallel with the flow direction. Changes reported have been calculated by comparing values for sterilized specimens with the corresponding values for the unsterilized reference. A guide detailing the test results is available to download here Investigation shows that EtO is the most gentle sterilization method for Mediprene TPEs.

Due to their design, Vibrophores have been used in the past solely as dynamic materials testing machines to determine durability with regard to fatigue life and fatigue limit, for example for fatigue testing to DIN 50100 (S-N curve) under tensile, compression, pulsating and alternating loads. The new generation of ZwickRoell Vibrophores can be used as both dynamic and full-fledged static materials testing machines that accommodate test loads up to 1000 kN. Typical applications are material fatigue tests and durability tests on standardized specimens and components (for example, piston rods, crankshafts, and screws) and production and quality control of components exposed to dynamic loads during their service lives, such as concrete and reinforcing steel, as well as quasi-static tensile and compression tests and fracture mechanics tests on CT and SEB specimens.

Donlouco has extensive experience in forging of hydraulic components, Cylinder bases, Flanged components and Rod eye. Part weights from 0.5Kg to 50Kg. Max forging capacity: 1,600 Ton. Forged parts for the hydraulics industry with secondary CNC Milling & Turning Forging capability from small detailed parts to large forgings of 50Kg. Maximum forging capacity of 1600 Ton. Forged parts mostly CNC machine to finished part level. Forging tools designed and managed and can be reversed engineered from finished part drawings by Donlouco. All steel grades to meet customer requirements and European standards. Forged parts can be fully tested, tensile, impact etc at approval stage and by sampling as required. All parts fully checked and inspected before shipping with full traceability and reports available with all shipments.