Tap parts - Import export

Thread standard: Metric, ISO DIN 13 Type: Combined machine tap (core hole drilling and thread tapping) Application: Combined (core hole drilling and thread tapping) Material of product: HSSE Surface treatment: no For materials: Materials of medium mechanical strength (alloyed and non-alloyed steels up to 600 N/mm², Malleable cast iron, Graphite cast iron, Copper, Brass, Aluminium, Aluminium-magnesium alloys, Zink alloys, Red bronze, Electron metall, Pressure-cast zink) Tensile strength up to: 600 N/mm2 Standard: DIN 357 Tolerance: ISO2/6H Combined machine taps enables the user to produce the tapping drill hole and the through thread in one operation without any tool changing. The tool incorporates a twist drill before the thread-tapping part. It is possible with this tool to produce through threads up to a maximum threaded depth of 2 x D. It is sensible to use this tool on machines possesing an RPM switchover facility for drilling and tapping.

Thread standard: Metric Fine, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: For high-tensile materials Material of product: HSSE Surface treatment: no For materials: Wear resistant steel Tensile strength up to: 1000 N/mm2 Standard: DIN 2181 Tolerance: ISO2/6H Set of 2 taps (taper, finish). Two-piece hand taps- sets are used for fine threads with a smaller pitch than with coarse thread, as the thread profile surface is smaller than with coarse threads and the force effects on the taps are smaller. The advantage of two-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with a ring) removes 65 per cent of the thread profile and the and brings the thread into shape. The finishing tap (No. 3) has no ring marking and cuts the remaining thread profile to produce the 100% full and usable thread.

Thread standard: Metric Fine, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: Left-hand Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 2181 Tolerance: ISO2/6H Left-hand (counter clockwise rotation). Set of 2 taps (taper, finish). Two-piece hand taps- sets are used for fine threads with a smaller pitch than with coarse thread, as the thread profile surface is smaller than with coarse threads and the force effects on the taps are smaller. The advantage of two-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with a ring) removes 65 per cent of the thread profile and the and brings the thread into shape. The finishing tap (No. 3) has no ring marking and cuts the remaining thread profile to produce the 100% full and usable thread.

Thread standard: Metric Fine, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: General use Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 2181 Tolerance: ISO2/6H Set of 2 taps (taper, finish). Two-piece hand taps- sets are used for fine threads with a smaller pitch than with coarse thread, as the thread profile surface is smaller than with coarse threads and the force effects on the taps are smaller. The advantage of two-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with a ring) removes 65 per cent of the thread profile and the and brings the thread into shape. The finishing tap (No. 3) has no ring marking and cuts the remaining thread profile to produce the 100% full and usable thread.

Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: For stainless steel Material of product: HSSE Surface treatment: VAP For materials: Stainless steel, Wear resistant steel, High alloyed steel Tensile strength up to: 1400 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H The oxide surface (vaporized) improves the adhesion of the cutting oil and provides a stabil lubricant film. Cold welding in the tap flanks is reduced. Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent.

[Refrigerator Freon Recharge Kit] The r134a refrigerator freon charging hose kit includes 1pcs r134a freon recharge hose with guage. 1pcs bpv-31 bullet piercing tap valve, 1pcs RH r134a self-sealing adapter[RH R134a Self-Seaiing Adapter] Through the r134a self sealing adapter, the r134a C3n tap of the refrigerator charging hose can compitable with r134a self sealing cans. Male to connect the r134a can tap, the female to connect self sealing cans. [BPV-31 Bullet Piercing Tap Valve] The Dpv31 piercing valve is compatible with 1/4inch, S/16inch, 3/8inch outside diameter pipes. Our oullet piercing tap valve can replace the part model of AP4502525, 3PV31D, GPV14, GPV31, GPV38, GPV56, MPV31[Refrigerator Freon Recharge Hose with Guage] One side of the refrigerant charging hose is piercing r134a can tap to directly connect puncture refrigerant cans, the other side is 1/4 SAE female prot to connect refrigerator male port.

Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: For high-tensile materials Material of product: HSSE Surface treatment: no For materials: Wear resistant steel Tensile strength up to: 1000 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre-cutting and reworking with the intermediate tap (No. 2)

Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: Left-hand Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H Left-hand (counter clockwise rotation). Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre-cutting and reworking with the intermediate tap (No. 2) bring the thread into shape.

Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: General use Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre-cutting and reworking with the intermediate tap (No. 2) bring the thread into shape. In the last step, the finishing tap (No. 3) is used, which has no ring marking.

[A/C Retrofit Valve Kit] The a/c recharge valve kit includes: 1 pieces r22 to r134a tow side adapters with dust cap, 1 pack BPV31 bullet piercing tap valve (with 1 piercing valve, 1 hex key, 2 adapters![R12 to R134A Retrofit Conversion Adapter] The ac retrofit valve with blue dust cap with 7/16- low side port can convert from R12, R22, R502 to R134a[BPV-31 Bullet Piercing Tap Valve] The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter p;pes. And the bullet piercing tap valve can replace the part model of AP450252S. BPV31D, CPV14, GPV31,GPV38, GPV56, MPV31[Premium Material] The r12 to r134a retrofit conversion fitting is made of premium brass and the BPV-31 Bullet p:ercing tap valve is made of zinc alloy, which make the retrofit valve kit durable for long-time use to meet your daily repair work need

Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: Conical profile Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H With conical profile Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre-cutting and reworking with the intermediate tap (No. 2) bring the thread into shape.

Looking for precision machining of the highest quality? Ming Xiao Mfg has you covered. Their competitive prices and top-notch Swiss CNC machining will ensure you get exactly what you need, with no compromise on quality. Upgrade your production process and create next-generation parts with Ming Xiao's precision parts — the sky is the limit! CNC Turning, Milling, Tapping, Threading, Precision CNC Turning Parts Choose China Ming Xiao Mfg

Wall Structure: Sandwich panel with a thickness of 33mm, outer layer laminate, XPS core Structural wall additionally reinforced with plywood Floor: Waterproof plywood covered with PVC flooring with increased abrasion resistance Frame: Steel, hot-dip galvanized Furniture Equipment: Recessed cabinets Wardrobe cabinet Sink cabinet 2 drawers Worktop covered with stainless steel Stainless steel hood Furniture made of high-density chipboard Hydraulics: 2-compartment sink Flexible faucet Hydraulic parts Seaflo self-priming water pressure pump. Capacity: 3.8L/min Kospel electric water heater, IP24 protection class

Washer for roofing screws With EPDM rubber gasket, galvanized / has no official standard The washer for the roofing screw is equipped with an EPDM rubber gasket made of ethylene, propylene, diene, methylene. It is not used without a self-tapping screw. The metal part of the washer is coated with white zinc. When painting the roofing screw, the metal part of the washer surface is painted. Coating of the metal part: white zinc. Gasket material: neoprene or EPDM E - ethylene, P - propylene, D - diene, M - methylene. Attention! The thickness of the EPDM rubber gasket on the washer is 2.4-2.8 mm.

Product Features: • Designed for harsh industrial environments or outdoor applications (security, outdoor wireless, controls, etc, etc). • Ideally suited for mounting printed circuit boards, panels or DIN rail mounted components. • Designed for wall mounting. Interior is secure as lid screws are behind the lid. Can be made more secure if wall mounted with security screws (tamper resistant screws). • Satin texture finish with smooth recessed surface on lid for a membrane keypad or label. • Standoffs moulded in the interior of the lid and enclosure - designed for #4 x 1/4" self tapping screws (Part number 1555TS100). • Choice of two materials: • General purpose ABS plastic (material carries a UL flammability rating of UL94 HB). Not recommended for outdoor use • Polycarbonate (material carries a UL flammability rating of UL94 5VA @ 3mm) - Recommended for outdoor use • Colour is a light grey (RAL 7035) to help keep heat absorption down.

Tapping valve bridge with lateral outflow and integrated stainless steel drill milling cutter Model 762 (for plastic pipes (PE oder PVC) Tapping valve bridge with stop valve and for tapping 1½“. The upper part of the milling valve for tapping is already mounted under pressure - ready for use. The tapping cutter with chambered sleeve prevents the drilling chips from being flushed out. The seal material corresponds to the KTW-recommendations of the Federal Environment Agency (UBA) as well as to the requirements acc. to DVGW W270. Application • for plastic pipes (PE oder PVC) DN 50 - 200 • for water PN 16 until DN 150, for water PN 10 until DN 200