Systems engineering - Import export

150 - 3000 CFM The pre-engineered VectraPaks are a versatile and readily available system for any industrial vacuum need. The Vectrapak comes with the accessories already mounted and piped for ease of installation. They are available from 150 to 3000 ACFM, suitable for operation to 29" HgV, and are available in both iron and stainless steel construction.

The new NASH XT Systems use the Nash pump advantages within a water-saving, self-contained system. Their capacity range is 200-1300 CFM (340-2210 m3/h). Designed for use in clean applications, such as medical centers, labs, paper converting, semiconductor applications, dairy and more, XT Systems give you the benefits of a liquid ring vacuum pump without the problem of providing constant seal liquid.

The NASH Vectra XL series of liquid ring pumps was designed to operate as both a vacuum pump and a compressor with a maximum pressure differential of 30 psig. This allows a negative pressure to be applied to the wells and can: assist in the production of low pressure natural gas and/or remove low pressure gas to aid in the production of oil. The discharge gas can be sent to a high pressure reciprocating compressor for pipeline transport. The systems are built on a platform that can be moved from well to well as needed.

0-29 in HgV (to 33 mbar abs) If you thought you couldn't afford the water costs associated with operating a liquid ring pump…think again. One of the wonderful features of the liquid ring pump is that it can be operated with a multitude of different fluids. A self-contained oil sealed system has a number of benefits over a traditional water sealed system: It eliminates water usage and disposal costs; it allows you to install it in remote locations where water may not be available; it allows you to attain higher vacuum levels than with water; it can prevent the condensing or dissolving of a process gas; it permits anhydrous processing with a liquid ring pump. Self contained system complete with off of the components for your basic operating needs. Standard components include: pump, TEFC motor, coupling or v-belt drive, drive guard, separator with oil mist eliminator, air cooled heat exchanger, recirculated seal line controls and high temperature alarm switch. Options include: inlet isolation valve, inlet check valve, vacuum relief valve, inlet filter, control panel and system skid plate. An oil sealed liquid ring system is more tolerant of carryover and wear, and it provides quiet operation. The oil is not required for lubrication which means it can operate at extremely long intervals between oil changes, easily going more than 10,000 hours with no down time. Aside from a periodic oil and filter change, the system can run for years with no scheduled maintenance. If your process requires very deep vacuum, Gardner Denver Nash has the solution. Using a two-stage liquid ring pump in an oil sealed system, vacuum levels lower than 10 Torr (29.6" HgV) can be attained.

All components pass a quality inspection before being used. Many different methods and procedures are used here (e.g. PMI 0 positive material inspection, crack detection). Our scope of machining reaches from chipping/metal cutting to sandblasting (using granule materials) to welding, assembling and painting. We handle many different metallic and nonmetallic materials as steel, stainless steel, duplex materials, titanium, plastic material We give a big importance to welding: Nash employees are certified according to ASME 9 and therefore qualified to manufacture pressure vessels and piping according to Pressure Equipment Directive (DIN EN 3834) and ASME Standards (31.3). Our systems are painted according to customer specification. We work with all wet paints and 2K paints. Anti-corrosion-coatings up to category C5M are possible. Of course, we meet all the other specifications, e.g. regarding coating thickness, as well. The electrical engineering is also done in the Nash location, from design to cabling. After the completion, the system undergoes a pressure test. Furthermore there is an option to do a complete function test to verify the performance data. Nash is certified according to ISO 9001 and ISO 14001.

Chemical Process Industry / Oil & Gas Industry Our vacuum and compressor systems maximize output and efficiency while minimizing maintenance and environmental pollution. Made of stainless steel and other sophisticated materials, they handle explosive and corrosive gases safely and efficiently. Pulp & Paper Industry Providing vacuum pumps and related equipment to the pulp & paper industry is a Gardner Denver Nash specialty. We are well known as an industry leader in engineered vacuum systems and water removal for paper machines. NASH vacuum pumps are used throughout the forming and press sections of a paper machine. Power Industry For over half a century, NASH has been the manufacturer of choice for air removal systems in steam cycle power generation plants throughout the world. NASH condenser exhauster packages efficiently remove inward air leakage from the condenser and improve the efficiency of the turbine under all operating conditions. Other Industries For more than 100 years, Nash has engineered liquid ring vacuum pumps, liquid ring compressors and engineered systems for the toughest applications. Our systems operate dependably for decades in filter applications, refineries, the sugar industry, in the food processing industry, mining and many more applications.

Steam Ejectors & Liquid Ring Vacuum Pumps Engineered for optimum efficiency, Nash Hybrid Systems now offer a 15% reduction in steam consumption. This was achieved through extensive R&D efforts, resulting in innovative design improvements. Nash has designed and manufactured hybrid systems since 1979, and our hybrid systems are recognized worldwide for reliable performance and low greenhouse gas emissions. As the new standard for Nash hybrid designs, these systems maintain traditional benefits, while offering accelerated payback through increased energy savings, condensers designed per HTRI specifications and a faster response time through regional sourcing. Nash is the only company to manufacture both the pumps and ejectors that go into a hybrid system, and offers a complete system warranty. All Nash hybrid systems are backed by global aftermarket support, decades of engineering expertise, and a proven history of reliable, dependable installations. Existing all ejector systems can be upgraded to more efficient hybrid systems by replacing or modifying stages. Nash engineers can evaluate your specific systems and recommend a custom hybrid design that will optimize your energy savings. Through reduced operating costs, upgraded systems can offer a payback of 2 years or less. Nash hybrid systems are used in industries and applications where deep vacuum is required and system reliability is critical. In operations where efficiency is key, emissions are a concern, or if there is a scarcity of steam in the plant, Nash hybrid systems are the optimal solution for efficiency.

From the first planning to shipment, every project is accompanied by one constant contact person. Depending on industry, process and specification, the best material (steel, stainless steel, duplex materials, titanium, plastic material) is chosen. There is a big importance to consider and meet the different standards and rules. Whether its DIN, ISO, ATEX, GOST ASME or PED (pressure equipment directive) - Nash engineers know all these general frameworks and restrictions. Our team of engineers finds the best solution to realize the customer's requirements.

For over half a century, NASH systems have been the products of choice for air removal systems in steam cycle power plants throughout the world. By reducing the energy loss due to air leakage into the condenser, our vacuum systems save millions of dollars worth of energy every day.

Gardner Denver Nash’s HP and NAB compressors are the ideal choice for recovering fuel gas and condensing valuable hydrocarbons, making more money for the refinery. When reviewing the total life cycle cost of a flare gas compressor system, the NASH liquid ring system provides more value and better reliability than any other technology, hands down. Liquid ring compressors run cool and they clean the gas as they compress it–eliminating the need for downstream aftercondensers and scrubbers. The result is a simpler, more reliable system.

40-150 CFM Pre-engineered SX Packages are a versatile and readily available system for any industrial vacuum need. The SX Packages come as either once-through or recirculated packages with the accessories already mounted and piped for ease of installation. Built with Nash patented gas scavenging, to increase high vacuum performance, they are available from 40 to 150 ACFM (70-250 m3/hr), suitable for operation to 29" HgV (31 mbar abs), and are available in cast iron construction.

These Duplex Vacuum Systems consist of an air ejector, two Vectra XL350 liquid ring vacuum pumps, interconnecting piping and related instrumentation. The vacuum pumps and ejector are manufactured in Aluminum Bronze and the piping interconnections are manufactured in Fiberglass Reinforced Epoxy. These special materials of construction ensure the usual Nash reliability even in the harsh conditions of offshore production.

A multipurpose transmission lubricant in all seasons used confidently in brake and clutch systems,except engine, transmissions,differentials and hydraulic systems and last drive units, combine-harvesters and disinfection machines.Ensures silent operation of braking system due to friction inhibiting property.

Synthetic Low Saps Diesel and Gasoline Engine Oil, designed to help prolong the life and maintain the efficiency of Car Emission Reduction Systems (Diesel Engines: Diesel Particule Filter DPFs, Gasoline Engines: Three WAY Catalysts - TWCs) Recommended for new generation low saps gasoline/dieselautomobiles and light-dutydiesel powered engines,

Synthetic Low Saps Diesel and Gasoline Engine Oil, designed to help prolong the life and maintain the efficiency of Car Emission Reduction Systems (Diesel Engines: Diesel Particule Filter DPFs, Gasoline Engines: Three WAY Catalysts - TWCs) Recommended for new generation low saps gasoline/dieselautomobiles and light-dutydiesel powered engines, specially for TWCs).

Synthetic Low Saps Diesel and Gasoline Engine Oil, designed to help prolong the life and maintain the efficiency of Car Emission Reduction Systems (Diesel Engines: Diesel Particule Filter DPFs, Gasoline Engines: Three WAY Catalysts-TWCs)Recommended for new generation low saps gasoline/diesel automobiles and light -duty diesel powered engines,

The operating diagram of the system is shown on the small screen It has a healthy compensation system in correct calculations. The panel interior and exterior materials used are in full compliance with the relevant standards and relevant articles. All materials used are fireproof. The system automatically protects the engines and all electrical equipment in the field against excessive voltage drops and rises. All our panel systems are designed so that they can be switched to automation systems in the future. The panels have automatic temperature controlled fans.

Lindemann Diesel Boost cleans and lubricates the entire diesel fuel system. By regularly adding Lindemann Diesel Boost to your tank, you keep the engine and fuel system clean and in good condition

Knight Optical offer a range of Stock Achromatic Doublet Lenses for use within Light Engines. Light engines are used for applications such as fibre optic lighting displays & in diagnostic tools like western blots & polymerase chain reaction systems. These Light Engines are typically able to produce changing colour displays. Within the light engine are a range of lenses & filters. The lenses help to homogenise and collimate the light, ensuring for a crisp high-quality beam output. Achromatic Doublets are typically used in light engine systems & correct for chromatic aberrations which exist in singlet lenses. This is when different wavelengths of light refract at different rates. The doublet lens helps to correct this by facilitating the focusing of the light to the same point. This is especially important in light engines which typically generate white light. Read PDF for more information

All around eciency is provided by the use of pre-assembled fastening systems; fewer part types, lessened assembly costs, and mimimized supplier base are just a few of the many reasons the trend is in pre-fabricated components. Depending on the application, manufacturers can use dierent materials and take advantage of detachable or permanent captive fastening systems. Features and benefits : -Assembly costs and times are reduced -Mimimized part diversity -High level of assembly reliability -Decreased efforts in assembly -Eliminate lost parts -High load capacity -Integrated tolerance compensation -Minimized supplier base for effectiveprocurement and decreased logistic costs -Removal of thread-cutting and self-tappingscrew combinations -Omission of incorrect product usageand assembly errors -Effortless disassembly and reassembly Advantages : -RELIABILITY OF ASSEMBLY -INTEGRATED TOLERANCE COMPENSATION -ALLOWANCE OF COMPACT DESIGNS - HIGH LOAD CAPACITY

The radial clearance is not considered a quality criterion. An improper radial or axial clearance may have detrimental implications during operation within an application. This may include suboptimal noise levels, heat generation, rigidity, and fatigue life. Prior to recommending an internal clearance range, our applications will run an analytical simulation on the bearing and application to ensure optimal performance. For more complex system, our application engineers can complete a FEA analysis, particularly when evaluating multiple bearings within a non-rigid housing.

Our products are unseen aides installed in many electric machines and motors: from huge plants to compact hand-held devices. Are you looking for a entirely specialised solution for current and data transmission? We produce the right carbon brushes and brush holders for the broad range of applications which characterises the field of electrical and plant engineering. This includes filling and packaging machinery, waste water treatment plants or revolving door systems, just as much as the manual electrical appliances which provide professional and hobby craft workers with reliable service. And these are a just a few examples. As we are system suppliers, you can be absolutely sure: MACK supports you throughout the entire development process. MACK supplies first-class OEM quality and durable replacement parts from in-house production. MACK makes your ideas come true!

The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance

Adaptive Docking System for Engine TestingSelf-Centering – Minimised Rigging Times Advantages Salient features and advantages of the adaptive TOK DOCKING SYSTEM: ➜ There is no longer need for complex mechanics and manual intervention on the dynamometer side. A correctly positioned, solid support is sufficient ➜ Rigging with time-consuming assembly procedures takes place outside the test cell ➜ Rotational speeds of up to 6 000 -rpm are possible ➜ All the toothed shaft components of a system engage in any turning position while maintaining good balance ➜ Centering attachments are available as spare parts and easily changeable ➜ The docking system can be extended to multiple test cells

Improve the efficiency of home heating systems Engineered for use in home heating systems, POREX® oil filters are designed in various shapes, sizes, and a range of filtration efficiencies to provide high oil-flow rates. With an insert-molded polypropylene (PP) base that is threaded for ease of cartridge connection, our filters are cost-effective and easy to replace. Specifically designed for home heating efficiency, our filters: Offer high flow rate s to optimize filtration efficiency. Save replacement time – Threaded base makes it easier to connect cartridge when replacing spent filters. Improve performance of home heating systems – Designs can be customized with multiple shapes, sizes and filtration efficiency options. Request Sample ask an engineer

Improve the efficiency of home heating systems Engineered for use in home heating systems, POREX® oil filters are designed in various shapes, sizes, and a range of filtration efficiencies to provide high oil-flow rates. With an insert-molded polypropylene (PP) base that is threaded for ease of cartridge connection, our filters are cost-effective and easy to replace. Specifically designed for home heating efficiency, our filters: Offer high flow rate s to optimize filtration efficiency. Save replacement time – Threaded base makes it easier to connect cartridge when replacing spent filters. Improve performance of home heating systems – Designs can be customized with multiple shapes, sizes and filtration efficiency options. Request Sample ask an engineer

Improve the efficiency of home heating systems Engineered for use in home heating systems, POREX® oil filters are designed in various shapes, sizes, and a range of filtration efficiencies to provide high oil-flow rates. With an insert-molded polypropylene (PP) base that is threaded for ease of cartridge connection, our filters are cost-effective and easy to replace. Specifically designed for home heating efficiency, our filters: Offer high flow rate s to optimize filtration efficiency. Save replacement time – Threaded base makes it easier to connect cartridge when replacing spent filters. Improve performance of home heating systems – Designs can be customized with multiple shapes, sizes and filtration efficiency options. Request Sample ask an engineer

Improve the efficiency of home heating systems Engineered for use in home heating systems, POREX® oil filters are designed in various shapes, sizes, and a range of filtration efficiencies to provide high oil-flow rates. With an insert-molded polypropylene (PP) base that is threaded for ease of cartridge connection, our filters are cost-effective and easy to replace. Specifically designed for home heating efficiency, our filters: Offer high flow rate s to optimize filtration efficiency. Save replacement time – Threaded base makes it easier to connect cartridge when replacing spent filters. Improve performance of home heating systems – Designs can be customized with multiple shapes, sizes and filtration efficiency options. Request Sample ask an engineer