Results for
PROMIX SOLUTIONS AG
Switzerland
Microcell foam extrusion systems from Promix are used for a wide variety of applications and for almost all polymers. Thanks to the production of very homogeneous microcellular foam structures, high-quality foam products with very low densities and excellent mechanical properties can be produced. Physical foaming can reduce material consumption and thus costs by an average of 20%. This not only saves money but also has a positive impact on the environment. Promix Foam extrusion systems set standards in the production of microcellular foam products with very homogeneous cell structure and high process consistency. The systems operate with environmentally friendly blowing fluids nitrogen or CO2 and are easy to integrate into existing or new extrusion lines. Depending on the application, density reductions of 5 to over 70 % can be achieved.The technology can be used for packaging films, sheets, foam core and corrugated pipes as wellas profiles, cable sheating, blow molds and blown films.
Request for a quotePROMIX SOLUTIONS AG
Switzerland
Insufficient surface quality, long cooling times, uneven thickness tolerances or other quality problems often limit maximum production output. Promix melt blenders eliminate these limitations sustainably and lead to significant cost savings. Would you like to optimize your extrusion process? Improved melt homogeneity and a more uniform melt temperature create tighter thickness tolerances and better surface quality. And quite often, it can also increase production throughput. Promix offers you highly effective static mixers and melt blenders at low investment costs. They are supplied ready for installation, including heater bands and holes for pressure and temperature sensors. The melt blenders are usually installed downstream of the screen changer & gear pump, and upstream of the die. The very short installation length allows easy retrofitting in existing extrusion lines.
Request for a quotePROMIX SOLUTIONS AG
Switzerland
Monitor the quality in your extrusion line, fiber production, polymer production or food and chemical production continuously in real time with the Promix Visco-P inline viscosity meter. Prevent scrap production and reduce raw material costs through active raw material management. Promix Visco-P is a true online rheometer that helps you monitor your production process and save production costs. Ask for a test unit and see for yourself! Advantages Promix Visco-P inline viscosity measurement ,Continuous monitoring of raw material quality and process conditions in real time ,Raw material cost reduction through active raw material management ,Precise inline viscosity measurement in the melt stream – without bypass ,Suitable for all viscous media ,Additional benefit of melt and temperature homogenization in the Promix melt blender, which also serves as a measuring section ,Can be integrated into any extrusion line ,Test units available
Request for a quoteZUMBACH ELECTRONIC AG
Switzerland
The line preheater guarantees successful and high-quality preheating of the conductor for the subsequent extrusion. This improves the adhesion of the cable insulation and the adhesion of the conductor. The preheater is suitable for use in extrusion lines for manufacturing of all types of cables. Properties Inductive heating technology Robust and durable design Material library for fast setup Integrated wire speed sensor that automatically compensates the power output Integrated PoE Ethernet interface Integrated web server in all processor versions Benefits Automated range selection with smart self-monitoring Actual input temperature for control circuit (analogue 0-10 V or serial RS) Optional fine wire guide for very small diameter ranges.
Request for a quoteZUMBACH ELECTRONIC AG
Switzerland
In-line fault testing on single wires and cables during the extrusion or rewinding process has become standard procedure today. ZUMBACH Spark Testers can be used to test the most diverse range of cable products as per international standards, like IEC 62230, UL 1581, UL 2556 and other. Integrated ports allow communication for easy integration with quality control systems (e.g. USYS). According to various applications, ZUMBACH offers Mains Frequency, Direct Current and High-Frequency spark testers. Typically they are installed at the end of the cooling trough in extrusion lines or in rewinding pro- cesses and detect the smallest defects and bare patches in the insulation or sheathing of electrical wires and cables. Properties Testing with sinusoidal alternating voltage and mains frequency or low frequency Bare patch and pinhole detection Electrodes for product diameters up to 250 mm Models with up to 40 kV AC or 28 kV DC available
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ZUMBACH ELECTRONIC AG
Switzerland
The processor is used for communication, analysis and display of sensor values for continuous transparency in processes such as: – Wire drawing – Extrusion procedures – In-line or off-line applications – Cutting – Drawing procedures – Tube forming and welding – Taping – Peeling – Centreless grinding – Stranding / assembling – Coating applications Properties Application for specific processor solutions available Processor for monitoring and controlling measuring values Statistical analysis and logging Product recipe management and storage Digital and analogue inputs and outputs Possibility to integrate several sensors Integrated standard host interface FFT/SRL analysis for maximum 4 parameters Zumbach RealTime operating software provides maximum virus protection thanks to embedded software solution.
Request for a quoteHCH. KÜNDIG & CIE AG
Switzerland
The KNC-600 Linear Scanner is a thickness gauge for cast film lines, film orientation lines or other extrusion lines where the thickness of flat film needs to be measured. Once the measurement is started, the traveler moves to the center of the film, before the thickness sensor extends. It continuously measures the thickness across the web. Two infrared sensors in the head ensure that the thickness gauge does not run over the edge. Application: The KNC-600 Linear Scanner is an online thickness gauge for cast film or MDO lines. Download: Brochure Options: Profilstar.NET
HCH. KÜNDIG & CIE AG
Switzerland
The S-100 is an online thickness gauge for blown film lines that measures the thickness of the film with nearly no contact. This capacitive measuring system has been developed to measure barrier film with a high percentage of PA and/or EVOH. The S-100 TWIN measures the lay-flat width and the web position of the film at the same time. Application: The S-100 Twin is a capacitive thickness gauge which can be used on barrier film lines and on water cooled extrusion lines. Download: Brochure Options: Profilstar.NET
Results for
Extrusion line - Import exportNumber of results
9 ProductsCompany type