Support load - Import export

High load capacity and reduced deflection telescopic rails with caged balls bearings. The telescopic guides have optimal running properties due to inductively hardened raceways. TELESCOPIC RAIL linear slides exhibit little deflection while under very heavy loads, even when fully extended. Telescopic guides come in eight different series (DS, DSE, DSC, DE, DBN, DMS, ASN, DRT) Torsionally rigid intermediate elements with S-shaped, double-T, or squared sections Over-extending, full or partial telescopic strokes are available In the DMS63 Series the supported load can reach 2,000kg per pair. Extremely low deflection and smoothness of movement even in high load, 24/7 applications Some Series can be locked in the closed position Special versions and strokes available upon request The Telescopic Rail product family includes full or partial extraction telescopic rails, and consists of eight (8) different sizes. The deflection resistant central components are available in the S, double T...

An avant-garde design of a thermally broken sliding system that permits maximum luminousity with the minimum amount of seen aluminium profile section. An elegance in design that looks to cover great light spaces with minimum frame fragments of between 9-14% of the total surface. It shows seen centre junction sections of only 20 mm, in the lateral junction at 77 mm and the top/bottom junctions at 57 mm. Possibility of inlaying the bottom, top and lateral frames. Possibility of sash meetings at a 90° corner without a mullion. In its monochannel version, comprising of fixed and sash, the hidden rail is found in the fixed area. This presents a new type of frame for 2 or 3 rails that allows the incorporation of a stainless steel rail that affords increased sliding smoothness, an increase in loading support for the bearings (up to 320 kg/sash) and increased durability.

External dimensions of support beams 1060×1875. Static load capacity depending on tube springs: With tube length of around 100 cm: 10,000 kg max stacking weight

External dimensions of support beams 1060×1395. Static load capacity depending on tube springs: With tube length of around 100 cm: 7500 kg max stacking weight

iglidur® flange bearing d1 [mm]: With this design it is possible to use the iglidur® high-performance bearings where housing bores with no precise tolerances are possible. When to use iglidur® flange bearings? When you want a screw flanged bearing When a clip bearing solution is not satisfactory as a sheet metal feedthrough When there is a housing with very rough tolerances When the tight fit of a press-fit bearing is not sufficient as an axial securing When not to use them? When an additional angle compensation is required igubal® flange bearing When a screw connection is not possible iglidur® clip bearing When a large guide length is necessary iglidur® G General features With this design it is possible to use the iglidur® high-performance bearings where housing bores with no precise tolerances are possible. The design enables high loads with minimum demand on the precision of the housing. iglidur® maintenance-free flange bearings are available in four materials - iglidur® G, iglidur® J, iglidur® X and iglidur® A180. Thus, with this design, a very wide range of applications - from the universal bearing through the highest wear resistance or temperature resistance (up to +250°C) up to FDA-compliant bearing solutions - can be covered. Installation Dependent on the stressing capacities, various mounting types are used. For low radial loads, it is enough to mount the iglidur® flange bearing with just two screws on a surface. For higher radial loads, it is advisable to support the iglidur® flange bearing in a bore on the reinforced side in the load direction. Large tolerances are permitted for this bore, as it is only to additionally support the iglidur® flange bearing. In order to support still higher radial loads, the iglidur® flange bearing can be press-fitted with the longer side in an H tolerance bore. The additional screw connection secures the firm seating of the bearing in the housing. For the mounting of the iglidur® maintenance-free flange bearing, no special tools or devices are necessary. The alignment of the bearing in multiple mounted shafts is easily possible at the installation. Available materials: iglidur® G, iglidur® A180, iglidur® J and iglidur® X The mounting of the iglidur® flange bearing: Simple and safe iglidur® flange bearing d1 [mm]:

Rentaload offers the rental of direct current load banks, allowing the reliability of a battery to be tested. Testing using load banks validates the operational performance and battery life of a system. It tests the inverter and generator under load conditions. Indeed, these tests, most often performed during preventive maintenance, can determine the condition of the inverter’s batteries and battery packs (or “strings”) and indicate whether individual cells are in good condition or approaching end of life and must be replaced. The load bank test will ensure that the backup system batteries will work together as expected when called upon to support a critical load.

Although single row radial bearings are designed primarily to support a radial load, they perform relatively well under thrust or combined radial and thrust load with the added advantage of low noise, vibration, and drag torque. The internal architecture and cage selection can be designed to meet the specific needs of the application, from high speed to high load. Thin section deep groove ball bearings have a small radial cross-sectional thickness that are used when compactness is required. We manufacture deep groove ball bearings with a minimum bore diameter of 3 mm to a maximum outer diameter of 47 mm.

IKO PILLOBALLs are compact selfaligning spherical bushings which can support a large radial load and a bidirectional axial load at the same time. These bearings are available in insert type, diecast type and lubricationfree type depending on the type of sliding surface. In the insert type, a spherical inner ring makes contact with a special copper alloy bushing with superior runin properties. In the diecast type, a spherical inner ring makes direct contact with the bore surface of the body of special zinc diecast alloy. In the maintenancefree type, a spherical inner ring makes contact with a special selflubricating PTFE liner. Thus, a smooth rotational and oscillatory motion can be achieved with superior antiwear and load properties in each type. PILLOBALL Rod Ends have either a female thread in the body or a male thread on the body, so they can be easily assembled onto machines. They are used in control and link mechanisms in machine tools, textile machines

IKO Spherical Bushings are compact selfaligning spherical bushings with inner and outer rings in contact with the sphere, which can support a large radial load and a bidirectional axial load at the same time. There are many models of Spherical Bushings, but they are basically divided into steelonsteel types and maintenancefree types according to the kind of sliding surfaces. Steelonsteel Spherical Bushings have inner and outer rings of highcarbon chromium bearing steel, of which sliding surfaces are phosphatetreated and then drycoated with molybdenum disulfide (MoS2). They can, therefore, operate with low torque, and have excellent wear resistance and large load capacity. They are especially suitable for applications where there are alternate loads and shock loads. They have wide applications mainly in industrial and construction machinery. Maintenancefree Spherical Bushings consist of an outer ring which has a special PTFE liner reinforced

UV-resistant Easily washable high density polypropylene tray Easy to install and store (foldable and stackable) Off-white or anthracite grey tray Easy to clean Foldable base under the table top (hammered grey colour) Double reinforcement bar under the top Can support a maximum load of 500 kg To help you handle the rectangular table, JAD Groupe also offers a transport trolley, specially designed for this model. This trolley can also be dismantled to improve storage of your equipment and is perfectly safe. Trolley on wheels diam. 120 cm with two braked wheels Can transport up to 20 rectangular tables Take advantage of personalised assistance now to get more information about our polypro folding table.

Compact castors combine a particularly impressive load capacity with a low mounting height. Some of these castors can support loads of up to 700 kg, with a total height of just 112 mm. Compact twin castors can handle even more: up to 1750 kg with a total height of just 125 mm. They are perfectly suited for reducing the risk of tall and heavy furniture tipping over due to a high centre of gravity. That’s why they are frequently used for server racks or control cabinets. Compact castors are the first choice when significant load capacities are required despite space being at a premium, such as under a hospital bed.

Franke bearing asseblies type LVG are bearing assemblies made of aluminum, designed as double row angular contact roller bearings with integrated bearing elements. LVG bearing assemblies are suitable for the highest load ratings. They convince by high rigidity, low rotational resistance and low weight. Designed as roller bearings, they can support high loads from all directions and are insensitive to shocks and vibrations. Franke LVG are sealed on both sides and are set with preload. By using aluminum, Franke beaing assemblies type LVG are 60% lighter than comparable steel bearings.

Monitor swivel arms for ergonomic workstation design The monitor mountings from RK Rose+Krieger allow for an optimal view of the monitor or a control panel. The range of action can be increased even further by using a swivel arm. This may be useful for carrying out set-up work on machinery for example, or if the monitor is having a disruptive impact on the working environment. There is also the option of expanding the support arm with two support tubes (twin version) to include a sturdy keyboard tray. The modular design of the RK swivel arm/support arm system allows for varied combination options and helps to adapt workstations to the most ergonomic arrangement. Different support arms, swivel arms and telescopic support arms are available, based on the load to be supported (monitor weight, torque support). The basic version has one support tube for loads of up to 10 kg , and the twin version has two support tubes for loads of up to 25 kg.

Franke bearing elements type LEW are suitable for medium rotational speeds and accuracies. They convince by smooth running even under tilt moment loads, high rigidity and compact installation space. The crosswise arranged rollers can support high loads from all directions. Bearing elements of model LEW are insensitive to shock and vibration. They offer the greatest possible flexibility in terms of preload, running characteristics and diameter ranges.

The 7270 TRANS CAL can run on standard or rechargeable batteries for portable use or from an external power supply. The handy model 7270 digital indicator supports load cells, pressure sensors and torque sensors based on strain gages. The 14 mm high display shows the current measured value. The TARE function allows any base load that may be present to be zeroed. The clear, well organized control structure enables quick and easy configuration of the TRANS CAL. The 7270 is equipped with a charge state indicator. Features: — Easy to operate - For all load cells, pressure sensors and torque sensors based on strain gages — Tare function - Excellent value for money - Built-in charge controller

The versatile, innovative weighing solution for truck silo / vessel weighing. The Weight Indicator X2 is available in a robust aluminium housing for front panel mounting and a stainless steel housing for field and table top mounting with FLP enclosure for hazardous zone. Utmost interference suppression and long term stability guarantees optimum use in harsh environments. 25 mm backlit transflective LCD display allows a good readability even under difficult conditions like direct sunlight. The high-quality sense-amplifier supports 4/6 wire load cells and allows connections over long distances without losing accuracy. Additional security is guaranteed by fully galvanically isolated sensor input circuit.

Hydraulic forklift for lifting and transporting steel drums of 210 lt. The particular shape of the angled front supports allows the loading and unloading on each type of pallet or platform. The hydraulic lifting system coupled to automatic hooking/unhooking and high maneuverability allows a single operator to handle drums in maximum security. The maximum distance between the ground and the bottom of the drum is 500 mm. The FP 450 DT hydraulic drum trolley can be used exclusively for handling welded metal drums, with rim and screw caps Tri Sure, having a diameter of 600 mm with a height of 900 mm and a maximum capacity of 210 liters. The lifter is supplied complete with usage and maintenance manual and regular CE certification.

  S-Ply® is a glass-fibre composite material that is suitable for the highest dynamic requirements. The load carrying and supporting material is a strictly parallel-orientated, non-woven, glass- or carbon-fibre laminate (UD-prepregnated).     The glass-fibres are not stretched and not bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure. Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesive to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all the benefits offered by the raw materials selected to form the composite material.  The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress. In addition, it has g

Belt conveyors used for handling bulk solids utilize rubber-covered belts, where the inner carcass of the belt provides the necessary strength to pull and support the conveyed load. The carcass is shielded from damage by layers of rubber, which may vary in thickness depending on the specific application. Belt conveyors exhibit the capability to transport materials across a broad range of rates, spanning from just a few kilograms per minute to several thousand metric tons per hour. ndard troughing angles are commonly set at 0°, 20°, 35°, and 45°. The angle of surcharge is a material-specific property and can be compared to the dynamic angle of repose. The power requirements for belt conveyors hinge on various variables, including the conveyor’s profile, the type of drive-pulley arrangement, belt tensions, belt speed, and idler spacing.

With the new height-adjustable monitor floor stand, RK Rose+Krieger is expanding its "RK monitor holder" product range to include a robust, ergonomic standing workstation for industry. The work surface and monitor mounting are supported by a stable triple column system and can be adjusted conveniently by hand to the size of the respective user. The three elegant, slim anodised aluminium columns stand on a black, powder-coated base frame which provides space for an industrial PC and accessories. Cables are elegantly routed in the integrated cable duct on the rear column. The light grey coated work surface (0.3 m2) can be adjusted by hand easily thanks to the tieback support. A spring-loaded locking bolt provides reliable latching. The height adjustment stroke is 400 millimetres. This way the workstation can be adjusted individually to the body size of the user. In addition, the height of the monitor can be adjusted separately and thus guarantees optimum workstation ergonomics.

Heat-resistant wheels and castors are used in a variety of areas, from the food industry to medical engineering and other industrial applications. Requirements for these wheels and castors are equally diverse: in addition to withstanding high temperatures, they also need to meet hygiene requirements, resist corrosion and support heavy loads. Blickle has eight different wheel series in its standard range to cover these applications. These include series with specialised, highly heat resistant solid rubber and a pressed steel or synthetic rim. Wheel series made of nylon, phenolic resin and cast iron round out the range of heat-resistant wheel series. Temperature resistance ranges from -200°C up to +600°C, depending on the wheel series.

Load-supported solar mounting frame for penetration-free roof mounting of PV modules as part of an extensive solar green roof build-up where retention volume and discharge delay are required.Available in inclines 10°, 15° and 20° Stability of the overall system proven in accordance with Eurocode 1 and 9. Property-specific proof of stability can be provided Consisting of base plate, bracket and Water Retention Box WRB 80FMA with capillary columns Supplied with associated module quick mounting rails, module clamps, rail connector set and wind bracing. Can be used in both a south-facing and an east-west orientation

Load-supported solar mounting frame for penetration-free roof mounting of PV modules as part of an extensive solar green roof build-up.Available in inclines 10°, 15° and 20° Stability of the overall system proven in accordance with Eurocode 1 and 9. Property-specific proof of stability can be provided Consisting of base plate, bracket and Drainage and Storage Board FKD 25MA. Supplied with associated module quick mounting rails, module clamps, rail connector set and wind bracing. Can be used in both a south-facing and an east-west orientation

Franke bearing assemblies type LVE are bearing assemblies with toothed belt gearing, aluminium housing rings and integrated bearing elements. Franke bearing assemblies type LVE are suitable for medium rotational speeds and accuracies. They convince by their low weight and are available at short notice, in some cases even from stock. Designed as 4-point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. The bearing assemblies are sealed on both sides and adjusted to preload.

Franke bearing asseblies type LVD are ready to install bearing assemblies with external gear, steel housing rings and integrated bearing elements. Franke bearing assemblies type LVD are suitable for medium rotational speeds and accuracies. They can be supplied at short notice, in some cases even from stock. Designed as 4-point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. The bearing elements are sealed on both sides and adjusted to preload.

Franke bearing asseblies type LVB are redy-to-install bearing assemblies with housing rings made of aluminium and integrated bearing elements. Franke LVB are suitable for medium rotational speeds and accuracies and convince by their light weight. LVB bearing assemblies are available at short notice, some of them even from stock. Designed as 4-point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. LVB sbearing assemblies are sealed on both sides and are set with preload.

Franke Bearing Assemblies Type LVA are ready-to-install bearing assemblies with steel housing rings and integrated bearing element. They are suitable for medium rotational speeds and accuracies. They are available at short notice, some of them even from stock. Designed as 4 point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. Type LVA bearing assemblies are sealed on both sides and adjusted with preload.

Our P-Range half-barrel shelters provide a safe, discreet and secure protective environment for the equipment stored within. They are designed to serve as storage and maintenance space for military aircraft, spare parts, vehicles, ammunition, and other military goods. Our revolutionary fast-opening electrical apse system allows a quick access and exit. Aircraft, helicopters or big vehicles can enter or exit the shelter in approximately 30 seconds. Fixed on the gable arch, this system has a semicircular shape to avoid water and snow collection/stagnation, and was designed to maximize the usable space inside. The protection offered can withstand very high wind speeds. This generation of shelters has been certified and tested for wind speeds of up to 180 km/h and the structure is able to support 90kg/sqm of snow load.

Our patented desuperheater TECtemp HT L lance cooler is suitable for applications at temperatures up to 750 °C due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature area. The reduced weight of the steam lance has a positive effect on the support load of the steam line. The functional principle is based on the proved TECtemp desuperheater. The compact control unit can be removed easily and can be serviced individually for servicing work.