Store tanks - Import export

SOLUTION TO EFFECTIVELY STORE EXCESSIVE HEAT FROM BIOGAS PLANTS – FROM 2,000 TO 6,000 M³ The LIPP® Thermal Storage Tank is a customized solution to effectively store excessive heat from biogas plants, biomass heating plants, solar plants or other heat sources. The carbon steel tanks are fabricated on site with the patented automated LIPP® Welding Technology. The horizontal MAW welding process enables the infinitely variable production of tanks up to 6,000 m³ volume with horizontal welding only. The large volume, above ground storage tanks are fitted with all necessary safety and operation equipment. Additional, individual components according to client’s specification can be considered. The roof and wall insulation is individually adapted to local conditions. The LIPP® Thermal Storage Tanks operate at atmospheric pressure, at a temperature of up to 95° C and are suitable for use with heating water. No additional nitrogen system necessary.

Storage tanks used in the production and processing of corrosive fluids must meet customer safety requirements as well as the standards and regulations in force in the country of delivery. CTRA offers a wide range of solutions for these storage tanks. These can be built entirely in GRP or in GRP - Thermoplastic composites depending on the nature of the stored product. Our tanks cover a range from 0.5m to 6m in diameter and from 0.5 m3 to 300 m3. Other volumes can be designed and built on request.

LIPP foremost engage with clients to build systems tailored towards their needs. Each tank is custom specified for each application, following a customer consultation – as construction materials, coatings and sealants differ greatly depending upon the stored media. Tank integrity, stability and corrosion resistance are paramount in any LIPP installation – which is achieved through a detailed understanding and advanced construction methods. This means water, aggressive liquids, solids, gaseous media and other substrates are provided for with equal expertise. Performance models and efficiency calculations also provide the customer with an insight into the future performance of their system. In terms of materials, LIPP provides the most appropriate metallic materials solution for each application. The entire spectrum is catered for; from specific purpose graded steels right up to high quality stainless steels.

Ideal for safely storing gas tanks. Welding system certified UNI EN ISO 3834-2. The tank is equipped with: Hinged door with anti-intrusion closure Galvanised roof Tanks inner hooking in chequer plate steel Modular structure Ramp access in sheet metal Safety labelling

Dosing systems The right amount every time Compact & efficient Our supply and dosing systems are designed to harmonize perfectly with all Eckardt lubricators. These range from small integrated dosing devices through to standalone oil supply solutions with filter units and tank heaters. Features & benefits • Individual dosing and storing solutions • Integrated tank heater and filter units optional • Suitable for oils of all manufacturers and viscosities • Available in all sizes and performance data Design versions and details Dosing system VB 10: the sound entry-level solution The VB 10 dosing system operates without any pressure. It hangs above the roller lubricator; the oil is supplied to the machine purely through the force of gravity. The capacity of the VB 10 storage container is 10 litres. Dosing system DB 10: lubrication made easy The dosing system DB 10 uses a pressure vessel with a capacity of 10 litres. This is equipped with a filler ball valve and plastic funnel, a p

Additional title: Outdoor tanks for storing fluids Use / Place of installation: Gärkeller / Fermentation cellar Capacity - 2 pieces: 950 hl Operating pressure: 2 bar Ckjzecgl3x Material: Stainless steel Position: vertical Base construction: short supporting skirt Features: Cooling: 1 x cone cooling jacket, 2 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; sight glass; temperature measurement

A galvanised corrugated steel water tank is a robust container designed to efficiently store water. Water tanks provide a practical solution to address water supply challenges and find applications across a wide range of industries, including irrigation, fire suppression, agricultural farming, and more. Our water tanks are specifically engineered to meet the demands of water storage for irrigation, catering to a variety of crops such as olives, wheat, cotton, and more. With their durable construction and effective design, these tanks ensure a reliable and convenient solution for your irrigation needs. Please note that our galvanised corrugated steel tanks are not intended for drinking water purposes. Choose our galvanised corrugated steel tanks for their durability and performance, ensuring a dependable water storage solution for your agricultural and irrigation projects.

We are a producer of custom made pressure vessels according to PED or ASME standards. Pressure vessels are tanks, designed to store compressed air. Pressure vessels can also be designed for any other technical gas. Volume of pressure vessel depends on compressor capacity and on consumption of compressed air. Each of our pressure vessels is calculated, assembled, tested and guaranteed to conform standards and to withstand the process necessary for your application.

An electric motor provides a constant, adjustable pushing or braking torque independentely of the marking speed. This reduces the strain on the product and ensures perfect synchronization even for small product diameters. Recommended for machines used for marking products of low mechanical strength. SGM - ELECTRONICALLY SYNCHRONIZED MARKING SYSTEM DRIVE A remote tacho generator supplies a control signal for synchronizing the printing wheels to the product. The power supply and control electronics are housed in a separate control cabinet. FM - REPLACEABLE INK SUPPLY MODULE WITH INK TANK, PUMP, COOLER, FILTERS, AND INK FLOW ADJUSTMENT AND SELECTOR VALVES (ONLY FOR SOD 10 C-FM) Allows the printing ink to be changed in about 2 minutes. Ink can be stored in the ink tank for several weeks with no degradation of ink properties. PRINTING DISCS Printing discs are available with any combination of numbers, letters, or other characters (specify when ordering).

B - STROBOSCOPE Automatically synchronized flashing stroboscope for monitoring the quality of printed marks. High quality finish with tight and resistant to sol­vent metal casing. VST - VIDEO SYSTEM FOR MONITORING THE PRINT QUALITY Medek & Schörner also offers a video system for monitoring the print quality of fast-running cable printing machines, e.g. allowing real-time inspection for bad quality and/or missing prints. FM-P - REPLACEABLE INK SUPPLY MODULE With ink tank, pump, cooler, filters, and ink flow fine adjustment and selector valves. Allows the printing ink to be changed in about 2 minutes. Ink can be stored in the ink tank for several weeks with no degradation of ink properties.

ERC AdBlue is used for the exhaust gas cleaning of passenger and commercial vehicles and added to the exhaust gas flow from a separate tank. The Effect With the combustion of diesel fuel, harmful nitrogen oxide (NOx) is created. It must be removed from the exhaust gas in order to protect the environment and comply with legal exhaust gas limits. The Result ERC AdBlue is a clear, non-toxic, synthetic urea solution stored in an additional tank near the diesel tank or in the boot of the passenger vehicle. It is not added to the diesel fuel. ERC AdBlue is used for the environmentally compatible exhaust gas post-treatment of diesel-powered vehicles by means of selective catalytic reduction (SCR system) and converts harmful NOx components of the exhaust gas into the harmless air components nitrogen and water. The benefits at a glance ERC AdBlue: Environmentally-friendly Removes harmful NOx from the exhaust gas Non-toxic and odourless ERC AdBlue is simply filled from the container...

Boiler feed water The so called „Boiler feed water“ is stored in a feed water tank and continuously feeded to the boiler of a steam generator. A big quantity of feed water is needed for example in steam power plants. The boiler generates steam, which is used for heating, for chemical processes or for driving a steam turbine respectively a steam engine. The feed water is purified in a way, that all harmfull components for the boiler are removed or neutralized. Leakages and evaporation loss are compensated by additional water which is purified in the same way than boiler feed water. Very often, valuable well and potable water resources are used for the generation of process water. Environmental regulations restrict this usage of well and potable water continuously and increase the costs for this resources steadily. The conditioning of stream water to boiler feed water helps saving potable water and means cost advantages. The process of conditioning is based on ultra filtration with down

The most popular bottle of organic maple syrup, an amber coloured, rich tasting syrup accompanies many desserts and sweet preparations. It is a true sugar in its own right, a natural whole sugar, the sugar of the forest. Its unique flavour will satisfy young and old alike! The maple grove managed by La Ferme Vifranc inc. is managed gently, without intensive felling or pruning, and the maples cohabit with other tree species, for a harmonious and balanced forest, certified organic. Organic maple syrup is produced in mid-March and late April. Vifranc Farm's high standards of quality are reflected in this exceptional syrup, through particularly demanding methods of working the maple grove and producing the maple syrup: - Two varieties of maple are used to obtain this syrup, the sugar maple and the flat maple. - As soon as the sap is harvested, it is stored in stainless steel tanks to mature for 24 hours.

I-FLEX Flexitanks can be used for more than just transportation. The I-Flex tank provides a storage solution for large volumes of liquids, and is compatible with any liquid that can be transported with an E-Flex flexitank. I-Flex is a Flexitank built for storage. It can be placed indoors or outdoors depending on your needs. The I-Flex flexitank is built to resist UV rays and is reusable. The capacity of I-Flex can be from 10,000LT/2,640 gallons to 70,000LT/18,492 gallons. We provide custom sizes according to our clients’ specific needs. I-Flex is built to be used multiple times with the same product. We recommend using a tarpaulin type of fabric laid under the I-Flex to protect it from possible scrap and debris on the ground. The I-Flex can store any non-hazardous products that do not enter into chemical reaction with PE, PP or stainless steel.

This Water Quality Test Kit is ideal to test the levels of 12 different elements, allowing you to identify potential issues in your water quality so you know how to correctly treat your water. This kit tests for: coliform bacteria, nitrate, nitrite, hydrogen sulfide, total hardness, total alkalinity, total chlorine, free chlorine, copper, sulfate, iron & pH. Suitable for: fresh and potable water samples, including water from taps, wells, springs, boreholes, ponds, rain water as well as water stored in tanks.