Results for
EUROPONTEX IMPORTAÇÂO & EXPORTAÇÂO
Portugal
Manufacturer and supplier of steel beams
Request for a quoteBEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
Full power in any position The universal machines from BEHRINGER can handle any job that is needed. Perfect to slicing through sectional steel as well as solids in metal and comparable plastics at almost any optional angle. With precise cuts, individually adjustable for bidirectional mitre cuts between 90° and 45°, and optionally even for acute angles of 30°. Semi-automatic variants In the BEHRINGER semi-automatic models, the material is positioned by eye, for instance with the aid of a linelaser. This procedure is recommended for frequently changing cut-off length and when the sections are marked on the material already. Automation Where larger cut-off lengths are required, we recommend the use of a measurement device for precise positioning of the material. Used in conjunction with infeed and outfeed peripheral devices such as roller conveyors and transverse transport devices, the degree of automation can be increased to achieve added streamlining effects.
Request for a quoteKAYGUN STEEL METAL IND. TRADE CO. LTD.
Turkey
2 -point adjustable attachment equipment holder. It is fixed to the steel beam surface by tightening. Golvanized coating.
Request for a quoteWELMAN METAAL
Netherlands
International steel trade, angle equal, angel unequal. Transport included.
Request for a quoteSFA ENVIRO
France
Designed to be installed in many circular clarifier tanks with flat or slightly sloping bases. Generally used for the treatment of urban or industrial wastewater containing solids that settle quickly and where it is important to be able to remove the sludge as it forms. Aluminium support beams Stainless steel feed well: at the bottom, which dissipates the effluent inlet and at the top, and assists in the sludge being raked towards the sludge discharge cone Sludge cone: collects the sludge transferring from the base of the tank through the suction tubes Suction tubes equipped with extended control valves Stainless steel weir plate and arm for the transfer to the overflow of clarified water
Request for a quoteC+R HYDRAULICS GMBH
Germany
• INP • UNP • IPE • HEA • HEB • HEM
Request for a quoteNORELEM FRANCE
France
D1 and D2 are customer specific e.g. 230122025; D1 = 5H7, D2 = 8H7 Note Zero backlash, torsionally rigid, resiliently flexible and maintenancefree full metal coupling for transmitting angle synchronous rotary movement. The innovative slit structure makes possible a very good axial, radial and angular flexibility with low reset force. Ideal for servomotors. Assembly Recommended shaft tolerances h7.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The measuring element of the load cell consists of a double bending beam on which strain gages are applied. The applied force detunes the measuring bridge so that a proportional output voltage is generated. The strain gages on the measuring element are protected against dirt and water spray by a rubber bellows. The sensor can be easily mounted via two mounting holes. The tension or compression force to be measured is introduced at the opposite end perpendicular to the sensor axis. Due to its special design, the influence by an extension (e.g. touch finger) on the measuring signal is low. Overload protection can be realized with little effort using a mechanical stop. FEATURES For tension and compression forces Measuring ranges from 0 ... 5 N to 0 ... 2 kN Relative non-linearity: ≤ ±0.1 % F.S. Very low mounting height Simple force application Material aluminium or stainless steel Special design on request burster TEDS optionally available
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Flat and Tapered Beam Torque Wrenches The error proofing industry started with a deflecting beam wrench built and sold by Paul A. Sturtevant. That was 1924. Highly accurate, very easy to use, and so durable they often last for decades - and decades! The special alloy steel beam is ground to a rate of deflection with the use of dead weights, rather than a dimensional tolerance. This process is time consuming and very labor intensive, but the result is a tool that remains accurate as long as the beam is intact and the pointer is on zero under no-load condition. The flat shape of the beam insures the wrench remains at a right angle to the fastener, reducing or eliminating side-loading error. This unique taper-grinding distributes stress evenly along the entire length of the beam, extending tool life indefinitely. With a minimum of moving parts, these tools are virtually repair and maintenance free.
Request for a quoteOHRA-REGALANLAGEN GMBH
Germany
Cantilever racking systems are highly load-bearing storage systems intended for storage of long and/or bulky storage materials. Such goods include timber, wooden boards, metal sheets, sections, beams or steel elements, building materials but also scrap cars and all kinds of heavy loads. Cantilever racking by OHRA is distinguished from standard racks using solid steel sections for all load-bearing elements. Thanks to this slim construction of our racks a high storage capacity can be achieved across a small floor space. There are specific types of cantilever racks for every product and for every industry. They differ based on requirements, height, useable depth, load-bearing capacity or section thickness. All cantilever racking are produced individually according to customer requirements; they are equipped with a high-quality powder coat or hot-dip galvanised for outdoor storage.
Request for a quoteHAGO BAUTECHNIK GMBH
Austria
Load capacity: 400 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section and additional frame. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-400 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, or for secondary traffic areas. Particularly suitable for use in areas where forklifts operate. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation heights: up...
Request for a quoteHAGO BAUTECHNIK GMBH
Austria
Load capacity: 250 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-250 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, where the cover needs to be heavy duty. Installation: Installation must be carried out according to our instructions. With watertight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Steel girders penetrate ≈ 10 cm into the shaft Special sizes possible *S =...
Request for a quoteEAE ELECTRIC
Turkey
EAE Seismic Support Systems offer rigid solutions for installations that require earthquake protection. The seismic supports, which can be utilized in any type of installation, allows for quick and easy installation due to the accessories that are designed for steel beam and space roof connections.
Request for a quoteALUMINAL YAPI
Turkey
These are systems designed to achieve a transparent appearance on the facade, where the glass is connected to the carrier system (steel column-beam, glass or steel tension system) with special stainless glass holders. Glass can be applied as tempered laminated glass or tempered double glass. The joint gaps between the glasses can be insulated with UV resistant silicones.
Request for a quoteNINGBO FRIMA INDUSTRY CO. LTD.
China
Product Introduction: load cells are available in the capacities from 5kg to 500kg. Alloy steel & stainless steel construction construction with single shear beam type. Sealed welding ,waterproof, anti-corrosion and suitable for all kinds of environment. Integral structure and easy installation. Suitable for electronic platform scale, hopper scales and other electronic weighing devices. Features: Capacity :5kg to 500kg Defend grade: IP67 & IP68 High accuracy. Alloy steel & stainless steel single shear beam Low profile and nice exterior
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
OM GLOBAL TRADE CO. LTD.
Turkey
We provide listed products in specific shapes and specs upon your request: Bolt, nut and screw sets Metal clamps in specific shapes and measurements Steel beam to beam connections in specific shapes and measurements
Request for a quoteIKEUCHI EUROPE B.V.
Netherlands
Features Liquid pressure type under the liquid pressures of 0.07–0.7 MPa (ca. 0.7 bar – 7 bar). Large turn-down ratio with minimal variation in spray angle. Uniform distribution suitable for multiple-nozzle arrangements. Large free passage diameter minimizes clogging. Standard spray angle of 55°, 70°, 95°, or 110°. Applications Cooling: Gas, steel plates, steel pieces, moldings, etc. [Steel making industry] Steel making process: Cooling continuous casted steel (slab, bloom, billet, beam blank, etc.) Rolling mill process: Cooling roll in heat treatment
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel anchorage point (Ø 16 mm), which has been awarded national technical approval, comes with its own base and counter plates (each measuring 200 x 200 mm). Simply attach it to a girder measuring max. 150 mm. Custom sizes are available upon request. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2013 Clamped onto a steel beam using a base and counter plate Upgrade with a supporting tube for usage as an end or corner post in a lifeline system Incl. stainless steel installation set Available for other girder sizes upon request
Request for a quoteKAYGUN STEEL METAL IND. TRADE CO. LTD.
Turkey
2 center plank holder. It is fixed to the wooden surfoce by tightening. Galvanized coating
Request for a quoteKAYGUN STEEL METAL IND. TRADE CO. LTD.
Turkey
3 center plank holder. It is fixed to the wooden surface by tightening Galvanized coating
Request for a quoteKAYGUN STEEL METAL IND. TRADE CO. LTD.
Turkey
3 point barrier holder It is fixed to the steel beam surfoce by tightening Galvanized coating
Request for a quoteERA ALUMINYUM LTD. CO.
Turkey
TECHNICAL SPECIFICATIONS Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal, sandwich panels Connection to concrete & steel beams. MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Concrete ans steel screws Epdm rubber A270 stainless screws ERA clips nut Stainless single bracket ERA locknuts.
Request for a quoteERA ALUMINYUM LTD. CO.
Turkey
TECHNICAL SPECIFICATIONS Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal, sandwich panels Connection to concrete & steel beams. MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Concrete ans steel screws Epdm rubber A270 stainless screws ERA clips nut Stainless single bracket ERA locknuts.
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Steel beams, profiles and tubes • Mixed cross-sections
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Large cross-section steel beams • Structurals with residual stress
Request for a quoteARNTZ GMBH + CO. KG
Germany
For sawing processes using minimal lubrication. Powerful at high cutting speeds and feeds. Engineered for : • Steel beams, profiles and tubes • Mixed cross-sections
Request for a quoteOZDEKAN RUBBER CO.
Turkey
Elastomeric bearings consisting of a solid block of vulcanised elastomer without internal cavities are called plain pads. Plain pads are economical efficient support for precast and pre-stressed concrete or steel beams in bridges and buildings. These pads are designed according to required standards and shear modulus of the manufactured elastomer may vary between 0.6-1.35 MPa to meet the customers need.
Request for a quoteResults for
Steel beams - Import exportNumber of results
36 ProductsCountries
Company type
Category