Steel beams - Import export

Manufacturer and supplier of steel beams

Full power in any position The universal machines from BEHRINGER can handle any job that is needed. Perfect to slicing through sectional steel as well as solids in metal and comparable plastics at almost any optional angle. With precise cuts, individually adjustable for bidirectional mitre cuts between 90° and 45°, and optionally even for acute angles of 30°. Semi-automatic variants In the BEHRINGER semi-automatic models, the material is positioned by eye, for instance with the aid of a linelaser. This procedure is recommended for frequently changing cut-off length and when the sections are marked on the material already. Automation Where larger cut-off lengths are required, we recommend the use of a measurement device for precise positioning of the material. Used in conjunction with infeed and outfeed peripheral devices such as roller conveyors and transverse transport devices, the degree of automation can be increased to achieve added streamlining effects.

2 -point adjustable attachment equipment holder. It is fixed to the steel beam surface by tightening. Golvanized coating.

International steel trade, angle equal, angel unequal. Transport included.

we sell IPE beams to all european countries

B2B trade of steel products

Designed to be installed in many circular clarifier tanks with flat or slightly sloping bases. Generally used for the treatment of urban or industrial wastewater containing solids that settle quickly and where it is important to be able to remove the sludge as it forms. Aluminium support beams Stainless steel feed well: at the bottom, which dissipates the effluent inlet and at the top, and assists in the sludge being raked towards the sludge discharge cone Sludge cone: collects the sludge transferring from the base of the tank through the suction tubes Suction tubes equipped with extended control valves Stainless steel weir plate and arm for the transfer to the overflow of clarified water

D1 and D2 are customer specific e.g. 230122025; D1 = 5H7, D2 = 8H7 Note Zero backlash, torsionally rigid, resiliently flexible and maintenancefree full metal coupling for transmitting angle synchronous rotary movement. The innovative slit structure makes possible a very good axial, radial and angular flexibility with low reset force. Ideal for servomotors. Assembly Recommended shaft tolerances h7.

The measuring element of the load cell consists of a double bending beam on which strain gages are applied. The applied force detunes the measuring bridge so that a proportional output voltage is generated. The strain gages on the measuring element are protected against dirt and water spray by a rubber bellows. The sensor can be easily mounted via two mounting holes. The tension or compression force to be measured is introduced at the opposite end perpendicular to the sensor axis. Due to its special design, the influence by an extension (e.g. touch finger) on the measuring signal is low. Overload protection can be realized with little effort using a mechanical stop. FEATURES For tension and compression forces Measuring ranges from 0 ... 5 N to 0 ... 2 kN Relative non-linearity: ≤ ±0.1 % F.S. Very low mounting height Simple force application Material aluminium or stainless steel Special design on request burster TEDS optionally available

Cantilever racking systems are highly load-bearing storage systems intended for storage of long and/or bulky storage materials. Such goods include timber, wooden boards, metal sheets, sections, beams or steel elements, building materials but also scrap cars and all kinds of heavy loads. Cantilever racking by OHRA is distinguished from standard racks using solid steel sections for all load-bearing elements. Thanks to this slim construction of our racks a high storage capacity can be achieved across a small floor space. There are specific types of cantilever racks for every product and for every industry. They differ based on requirements, height, useable depth, load-bearing capacity or section thickness. All cantilever racking are produced individually according to customer requirements; they are equipped with a high-quality powder coat or hot-dip galvanised for outdoor storage.

Load capacity: 400 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section and additional frame. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-400 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, or for secondary traffic areas. Particularly suitable for use in areas where forklifts operate. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation heights: up...

Load capacity: 250 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-250 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, where the cover needs to be heavy duty. Installation: Installation must be carried out according to our instructions. With watertight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Steel girders penetrate ≈ 10 cm into the shaft Special sizes possible *S =...

EAE Seismic Support Systems offer rigid solutions for installations that require earthquake protection. The seismic supports, which can be utilized in any type of installation, allows for quick and easy installation due to the accessories that are designed for steel beam and space roof connections.

These are systems designed to achieve a transparent appearance on the facade, where the glass is connected to the carrier system (steel column-beam, glass or steel tension system) with special stainless glass holders. Glass can be applied as tempered laminated glass or tempered double glass. The joint gaps between the glasses can be insulated with UV resistant silicones.

Product Introduction: load cells are available in the capacities from 5kg to 500kg. Alloy steel & stainless steel construction construction with single shear beam type. Sealed welding ,waterproof, anti-corrosion and suitable for all kinds of environment. Integral structure and easy installation. Suitable for electronic platform scale, hopper scales and other electronic weighing devices. Features: Capacity :5kg to 500kg Defend grade: IP67 & IP68 High accuracy. Alloy steel & stainless steel single shear beam Low profile and nice exterior

Suitable for business that have no problem with dead zones Prevents load’s swinging Comes with rope or chain Adjustable intermediate distance Thanks to its modular structure it can be used with different dimensional units 600 ton carrying capacity Makes wide and heavy loads safely loaded Prevents damage while loading Supporting attachments that can change weight axis CARRYING TRAVERSES Carrying capacity of 0-50 tons Constant and adjustable traverses Makes unbalanced or unequal products to be safely lifted Low dead field Can be used for separate weight Compatible with CE standards Compatible with chain sling and chain hooks Heavy-duty type manufacture Easy stocking Can be used with single or dual hookAs Per International Standard

Features Liquid pressure type under the liquid pressures of 0.07–0.7 MPa (ca. 0.7 bar – 7 bar). Large turn-down ratio with minimal variation in spray angle. Uniform distribution suitable for multiple-nozzle arrangements. Large free passage diameter minimizes clogging. Standard spray angle of 55°, 70°, 95°, or 110°. Applications Cooling: Gas, steel plates, steel pieces, moldings, etc. [Steel making industry] Steel making process: Cooling continuous casted steel (slab, bloom, billet, beam blank, etc.) Rolling mill process: Cooling roll in heat treatment

2 center plank holder. It is fixed to the wooden surfoce by tightening. Galvanized coating

3 center plank holder. It is fixed to the wooden surface by tightening Galvanized coating

3 point barrier holder It is fixed to the steel beam surfoce by tightening Galvanized coating

Engineered for : • Steel beams, profiles and tubes • Mixed cross-sections

Engineered for : • Large cross-section steel beams • Structurals with residual stress

For sawing processes using minimal lubrication. Powerful at high cutting speeds and feeds. Engineered for : • Steel beams, profiles and tubes • Mixed cross-sections

Elastomeric bearings consisting of a solid block of vulcanised elastomer without internal cavities are called plain pads. Plain pads are economical efficient support for precast and pre-stressed concrete or steel beams in bridges and buildings. These pads are designed according to required standards and shear modulus of the manufactured elastomer may vary between 0.6-1.35 MPa to meet the customers need.

Unique components that reduces maintenance need. Made to run for many years at toughest conditions for great cuts. Unique construction features combined with great craftmanship Machine body and upper beam’s steel constructions have been designed according to minimum stretch and optimum resistance criteria.

Material Galvanized Steel Item 3703

Material Galvanized Steel Item 3702

We have developed an extensive range of high integrity stainless steel Masonry Support systems, all designed to support the external leaf of masonry for all types of structure. The Wincro Masonry Support range covers various applications including fixing to concrete, steel beam and steel RHS framed structures.