Spring bar - Import export

Torsion bar springs is a good alternative to clock springs or helical torsion springs, when a rotational torque is needed in applications where the spring shall fit into a space that is limited radially, but with lots of space axially.

Suitable for Bmw, Toyota, Ford, Opel, Vauxhall, VW, Audi, Saab, Nissan, Honda, Subaru, Volvo, Mitsubishi etc.  Maximum pressure 1050kg  Dimension clamp sets;  65mm – 125mm  88mm – 160mm  125mm – 215mm

STOL®78 is a CuMg alloy for connectors in automotive, electrical and electronic applications. Thanks to the combination of high electrical conductivity with high strength and good relaxation resistance, this alloy is particularly suitable for relays, current carrying springs, bus bars and fuse boxes with resilient functions.

single acting plunger Ø 16 mm, stroke 15 mm max. load force 6,5 kN off-position retracted contact con oil pressure and spring force max. 500 bar, as per data sheet B1.940

with long shaft, shaft length 70 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 60 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 50 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 40 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 30 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 20 mm double acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 50 mm single acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 40 mm single acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 30 mm single acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

with long shaft, shaft length 20 mm single acting, metallic wiper edge plunger Ø 10 mm, stroke 6.5 mm max. load force 3 kN workpiece contact by spring force max. 70 bar, as per data sheet B1.9472

single acting plunger Ø 16 mm, stroke 15 mm max. load force 9,5 kN off-position retracted contact con oil pressure and spring force max. 500 bar, as per data sheet B1.940

single acting plunger Ø 16 mm, stroke 8 mm max. load force 9,5 kN off-position retracted contact con oil pressure and spring force max. 500 bar, as per data sheet B1.940

single acting plunger Ø 16 mm, stroke 8 mm max. load force 6.5 kN off-position retracted contact con oil pressure and spring force max. 500 bar, as per data sheet B1.940

single acting plunger Ø 16 mm, stroke 8 mm max. load force 6.5 kN off-position extended contact by spring force max. 500 bar, as per data sheet B1.940

with self-locking with pneumatic position monitoring plunger Ø 40 mm, stroke 20 mm max. load force 40 kN off-position extended contact by spring force max. 500 bar, as per data sheet B1.930

with self-locking with pneumatic position monitoring plunger Ø 40 mm, stroke 20 mm max. load force 40 kN off-position retracted contact by spring force max. 500 bar, as per data sheet B1.930

with self-locking with pneumatic position monitoring plunger Ø 25 mm, stroke 12 mm max. load force 20 kN off-position extended contact by spring force max. 500 bar, as per data sheet B1.930

with self-locking with pneumatic position monitoring plunger Ø 25 mm, stroke 12 mm max. load force 20 kN off-position retracted contact by spring force max. 500 bar, as per data sheet B1.930

with self-locking with pneumatic position monitoring plunger Ø 16 mm, stroke 8 mm max. load force 8 kN off-position extended contact by spring force max. 500 bar, as per data sheet B1.930

with self-locking with pneumatic position monitoring plunger Ø 16 mm, stroke 8 mm max. load force 8 kN off-position retracted contact by spring force max. 500 bar, as per data sheet B1.930

Trailer sway can be caused by crosswinds, poor trailer loading (load being too far back), or inadequate spring bar tension in the weight distribution system. The use of a weight-distributing hitch by itself may help limit trailer sway by evenly distributing the weight of the load, but it will do little to improve sway caused by crosswinds. To help control sway, a sway-control device is recommended for most standard weight distribution systems. Because sway control is so important, it is built into many systems. If you want to wait to add on a sway control device, you will likely be limited to a bar-style friction sway control. Trailer sway devices come in 2 basic types - those that reduce sway once it has begun and those that work to prevent sway altogether. Reduce Sway Sway control systems that reduce sway typically rely on friction to keep your trailer from shifting, preventing sway from increasing

Inertia Vibratory Grate Feeders are a type of feeders in which grates are the element used to feed the material. Grate feeders are mainly used for materials with medium and large grain size, they are perfect as feeders for crushers and for stone processing. The grate in this type of feeders is made in a fixed (welded) or active (bar) version. In addition, depending on the customer’s needs and the intended use of the machine, the grates are made as flat or cascading. The material used for the production of the grate, depending on the needs, is structural steel, wear-resistant steel, or in the case of bar grates, spring steel. Thanks to their construction, Grate Feeders enable partial separation of oversize grain. Active grates made in a steel or polyurethane frame. In feeders of this type, thanks to the use of electric vibrators, high efficiency is achieved at relatively low power consumption.

The RBK 60 S is an extremely robust water-cooled weld head for a standard heat exchanger application up to an ID of 60 mm, modified to an ID of 99 mm or 120 mm. The head is pneumatically centred and is available with a rotating wire device and/ or arc voltage control (AVC) as an option. The head can also be used with a pneumatic positioner instead of a balancer. Versions: — RBK 60 S weld head with pneumatic centring, including hose package, 8m, water-cooled — RBK 60 S weld head with pneumatic centring and wire feeder incl. hose package, 8m, water-cooled — RBK 60 S weld head with pneumatic centring, wire feeder and AVC incl. hose package, 8m, water-cooled Package includes: — Weld head — Small torch incl. torch consumables and tungsten electrode Ø 2.4 mm — Water-cooled hose package, 8 m — Pull bar B — Transport case Optional: — Div. spring sleeves and pull bar sets for RBK 60 S — Torches, Balancer, Tube-to-tubesheet positioner...

With tube-to-tubesheet weld heads, it is possible to achieve consistently high-quality, reproducible welding of tubes to tubesheets, with or without additional wire. The tubes to be welded can be flush with the tubesheet, offset, protruding or behind the tubesheet. The RBK 38 S and the RBK 60 S are our two new tube-to-tubesheet weld heads. The RBK 38 S is a small, handy water-cooled head for welding tubes to tubesheets up to an ID of 36.7 mm, without additional wire. Package includes: — Weld head — Water-cooled hose package, 6 m — Pull bar B — Gas hood ID 35 mm — 0° electrode holder — Transport case Optional: — Div. electrode holders for RBK 38 S — Div. gas hoods for RBK 38 S — Div. spring sleeves and pull bar sets for RBK 38 S

Spring Wall units are ideal for installations with limited space or rehabilitation clinics requiring a sturdy anchor point for cords or springs. Exercises with this wall-mounted equipment can be performed while standing, kneeling, sitting, lying on your back or on your stomach. It is used with mats for floor exercises or with traditional mats. MATERIAL Solid oak wood with 10 positions for different work intensities DIMENSIONS Depth: 2cm; Width: 56 cm; Height: 184 cm WEIGHT 22 KG EQUIPMENT : Wooden skewer with springs Fixed wooden bar Non-slip push bar, adjustable to 6 heights, with a safety strap. 4 red springs (strong), 4 green springs (medium) Spring handle pack The Wall Unit is wall-mounted Pilates equipment designed to maximize the use of space. This metal frame features adjustable bars, springs, straps and handles, providing a variety of exercises to strengthen muscles, improve flexibility and stabilize the core.